Setting up the Atellica® DCA Analyzer

Atellica® DCA SIEMENS Healthineers Setting Up the Analyzer Job Aid Setting up the Atellica DCA Analyzer for the first time A LOCA 2:03 The Atellica DCA Analyzer consists of the following components that are packaged, ordered, and shipped separately: A. Atellica POC Solution Display SIEMENS Healthineers B. Atellica DCA Module B The Atellica POC Solution Display and optional mounting screw Atellico DCA are included in one box. The Atellica DCA Module, Accessories, and User Guide are included in a separate box. 3 Instructions for unpacking and assembling the analyzer: 1. Carefully open and unpack the shipping box, removing the protective layers and contents 000 2. Place the module on a firm, level surface 3. Remove the cover over the docking slot and insert the display 1 NOTE: Consumables are ordered separately. Template Effective Date: 10 Aug 2021 | HILS 2223 Effective Date: 01 Mar 2023 | HOOD05162003334286 Unrestricted © Siemens Healthineers, 2023 *This topic is continued on the next slide. Atellica® DCA SIEMENS Healthineers Setting Up the Analyzer Job Aid **NOTE: The mounting screw can be found in the accessories box that comes with the analyzer. The accessories box also Setting up the Atellica DCA Analyzer for the first time includes the power cords, power supply, cleaning kit, and optical test cartridge. 4. It is possible to secure the display to the module. To secure the display to the module: A. Remove the rear module cover B. Insert the mounting screw** C. Hold the mounting screw with one hand, and tighten it using a Phillips screw drive A B C 2 *This topic is continued on the next slide Effective Date: 01 Mar 2023 | HOOD05162003334286 Unrestricted © Siemens Healthineers, 2023 Atellica® DCA SIEMENS Healthineers Setting Up the Analyzer Job Aid Setting up the Atellica DCA Analyzer for the first time 5. Connect the power supply cable to the module and plug it in 6. Firmly push the on the back of the module to turn it on 6 7 • Make sure the display is connected properly. You should see the icon on the display, which 5 indicates that the display is charging 7. Turn on the display by pressing the Power button for 3 seconds NOTE: For first-time use, allow the display to charge approximately 30 minutes before you start a test. *This topic is continued on the next slide 3 Effective Date: 01 Mar 2023 | HOOD05162003334286 Unrestricted © Siemens Healthineers, 2023 Atellica® DCA SIEMENS Healthineers Setting Up the Analyzer Job Aid Setting up the Atellica DCA Analyzer for the first time Instructions for setting up user preferences: 1. Once the display starts up, it will initiate the Setup Assistant 2. On each screen, select your choice for the option shown NOTE: Refer to the Atellica DCA Analyzer Advanced User Guide for complete details. 4 Effective Date: 01 Mar 2023 | HOOD05162003334286 Unrestricted © Siemens Healthineers, 2023 SIEMENS Healthineers Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2025 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens-healthineers.com 5 Effective Date: 01 Mar 2023 | HOOD05162003334286 Unrestricted © Siemens Healthineers, 2023