Nexaris Dockable Table MAQUET Workflow Online Training

Continue Continue Continue Continue Continue Nexaris Dockable Table MAQUET Workflow Online Training ? Master Template HILS2218 | Effective Date: 25-Mar-2022 Nexaris Dockable Table MAQUET Workflow Online Training This training covers the MAQUET version of the Nexaris Dockable Table (NDT). It introduces you to the typical workflow of transferring a patient between the MAQUET OR table and the MR system. 1 4 3 2 5 Carry out preparations for transfer workflow Carry out cleaning and disinfection Carry out transfer: NDT OR table ​Carry out transfer: OR table NDT Remember general safety information Welcome [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0001.mp3] Welcome to the Nexaris Dockable Table MAQUET Workflow Online Training. This training covers the MAQUET version of the Nexaris Dockable Table. It introduces you to the typical workflow of transferring a patient between the MAQUET OR table and the MR system. The course will cover the five learning objectives listed. Please note: Nexaris Dockable Table is sometimes abbreviated to NDT. ? Navigation Hints Before you start, we would like to give you a few tips on how to navigate: Tabelle mit 2 Spalten und 3 Zeilen Not all pages contain audio. Some pages invite you to read for yourself. All pages show a ? button in the lower-right corner. Select the ? button for a quick guide through the navigation elements. Select the button in the top left corner to display or hide the menu. Enjoy the course! ? Navigation Hints This page contains only on-screen text and no voiceover. ? Workflow Overview Undock the Nexaris Dockable Table from the MR system, move it to the OR table and dock the two tables. Slide the Transfer Board from the OR table to the Nexaris Dockable Table. Transfer the patient to the MR system. After the examination: Move the Nexaris Dockable Table back to the OR table, dock the tables and transfer the patient to the OR table. Workflow Overview [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0003.mp3] Let's start with an overview of the workflow. The MR system and the OR table are often located in different rooms. To transfer the immobilized patient, undock the Nexaris Dockable Table from the MR system and move it to the OR table, then dock the two tables. Next, slide the Transfer Board, with the patient lying on it, from the OR table to the Nexaris Dockable table and transfer the patient to the MR system. After the examination, move the Nexaris Dockable Table back to the OR table, dock the tables and transfer the patient to the OR table. ? Workflow Overview – Video Workflow Overview – Video [Video ID 21773] Note for foreign language versions: A version of the video without on-screen text is available in the content archive. [ndt_maq-wfl_1_4.wav] Watch a video showing the patient transfer between the MAQUET OR table and the MR system. ? Preparations Preparations [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0004.mp3] Before transferring patients with the Nexaris Dockable Table, some preparations must be made. On the following pages, learn more about preparing the equipment, the examination, and the patient. ? Preparing the Equipment The Nexaris Dockable Table is ready for use. For head examinations with lowered head holder: Spine coil is removed; space for the head holder is free. The OR table is ready for use (if necessary, including interface adapter). The correct OR tabletop (transfer tabletop and the correct Transfer Board) is ready for use. Depending on the OR table used, either the foot-end Transfer Board stop plate or the docking adapter is inserted. 1 1 1 2 2 2 1 Please select the numbers to learn more. Preparing the Equipment [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0005.mp3] First you need to make sure that the Nexaris Dockable Table is ready for use. For head examinations with a lowered head holder, ensure that the spine coil is removed and that the space for the head holder is free. Check that the OR table is ready for use, if necessary, including the interface adapter. Ensure that the correct OR tabletop, i.e. the transfer tabletop and the correct Transfer Board, is ready for use. Depending on the OR table used, either the foot-end Transfer Board stop plate or the docking adapter is inserted [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0006.mp3] Check that the Transfer Board, padding, fixation straps, and head holder (including bore gauge) or head plate extension are ready for use. Check that the Tim coil interface is ready for use (if needed). Check that the MR system is ready for measurement and the patient has been registered. Please also remember to check the table lock switch daily. Check the emergency undocking of the Nexaris Dockable Table once a week. The Transfer Board, padding, fixation straps, and head holder (including bore gauge) or head plate extension are ready for use. The Tim coil interface is ready for use (if needed). The MR system is ready for measurement and the patient has been registered. Check the table lock switch (daily) and the emergency undocking of the Nexaris Dockable Table (once a week). 2 ? Preparing the Examination Undock the Nexaris Dockable Table from the MR system by pressing the Docking/Undocking button. Move the Nexaris Dockable Table up to the OR table. CAUTION – The Nexaris Dockable Table may collide with the OR table, or vice versa! To avoid possible injuries, before positioning the OR table, always check the area around the table. Ensure free space of approx. 3.5 m / 11.5 ft for movements of the Nexaris Dockable Table. Preparing the Examination [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0007.mp3] To prepare the examination, first undock the Nexaris Dockable Table from the MR system by pressing the Docking/Undocking button. Then move the Nexaris Dockable Table up to the OR table. CAUTION - The Nexaris Dockable Table may collide with the OR table, or vice versa! To avoid possible injuries, before positioning the OR table, always check the area around the table. Ensure free space of approx. 3.5 m or 11.5 ft for movements of the Nexaris Dockable Table. ? Positioning the Transfer Board on the OR Table Position and secure the Transfer Board on the OR table. If necessary, mount the head holder or the head extension on the Transfer Board and position the Transfer Board on the OR table. For details, please refer to the corresponding OR table and head holder operator manuals. Positioning the Transfer Board on the OR Table [ndt_maq-wfl_1_8.wav] Before positioning the patient, you first need to position and secure the Transfer Board on the OR table. If necessary, mount the head holder or the head extension on the Transfer Board and position the Transfer Board on the OR table. For details, please refer to the corresponding OR table and head holder operator manuals. ? Preparing the Patient Before entering the MR room, perform the patient preparation. Review the MR Safety Screening form, and check for any metallic objects, tattoos, etc.. Then position the patient on the Transfer Board. Preparing the Patient [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0009.mp3] Before entering the MR room, perform the patient preparation. Review the MR Safety Screening form, and check for any metallic objects, tattoos, etc. . Then position the patient on the Transfer Board. Learn more about patient positioning on the next page. ? 1 1 1 2 2 2 3 3 3 4 4 4 Positioning the Patient on the Transfer Board 1 Please select the numbers to learn more. Transfer Board is prepared and secured on the OR table. The straps are undamaged and functional. Prepare the straps to secure the patient. Position the straps in the fixation plates and mount the fixation plates on the Transfer Board. For details, please refer to the operator manual supplied by Getinge. Only use the straps supplied with the MAQUET equipment. Positioning the Patient on the Transfer Board [ndt_maq-wfl_1_10_1.wav] After you have prepared and secured the Transfer Board on the OR table, please make sure that the straps are undamaged and functional. Then prepare the straps to secure the patient. Position the straps in the fixation plates and mount the fixation plates on the Transfer Board. For details, please refer to the operator manual supplied by Getinge. Only use the straps supplied with the MAQUET equipment. Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0011.mp3] Next, please position the cushions for padding on the Transfer Board. For details, please refer to the operator manual supplied by Getinge. Position the patient on the Transfer Board. Full lateral positioning of the patient is not supported due to the limited space in the MR bore. You can achieve partial lateral positioning of the patient using positioning aids and by tilting the head holder laterally. The surgeon needs to define the degree of lateral positioning on the Transfer Board. Always secure the patient with the straps. Please note: You can use the MR Safe or MR Conditional hose holders to secure the breathing hoses. [ndt_maq-wfl_1_10_3.wav] If a head holder is used: Position the patient's head so that the planned approach can be reached, the coils can be attached and no collision during transfer is possible. Pin the patient's head in the head holder. For details, refer to the head holder operator manual. Please avoid injury to the patient caused by collisions between the head holder and the MR system. If using a non-Siemens head holder, always use the corresponding bore gauge to check for potential collisions between the head holder with equipment attached, and the MR system. Pay special attention to the top of the MR system and the lower side of the Nexaris Dockable Table tabletop. For details, please refer to the corresponding operator manual supplied by the head holder manufacturer. [ndt_maq-wfl_1_10_4.wav] Whenever an MRI is needed during the surgical procedure, set the OR table to the TRANSFER MRI position. For details, please refer to the operator manual supplied by Getinge. 4 Set the OR table to the TRANSFER MRI position. For details, please refer to the operator manual supplied by Getinge. 3 If a head holder is used: Position the patient's head so that the planned approach can be reached, the coils can be attached and no collision during transfer is possible. Pin the patient's head in the head holder. For details, refer to the head holder operator manual. WARNING: Possible collisions between head holder and MR system! Avoid injury to the patient If using a non-Siemens head holder, always use the corresponding bore gauge to check for potential collisions between the head holder with equipment attached, and the MR system. Pay special attention to the top of the MR system and the lower side of the Nexaris Dockable Table tabletop. For details, please refer to the corresponding operator manual supplied by the head holder manufacturer. 2 Position the cushions for padding on the Transfer Board. For details, please refer to the operator manual supplied by Getinge. Position the patient on the Transfer Board. Full lateral positioning of the patient is not supported due to the limited space in the MR bore. You can achieve partial lateral positioning of the patient using positioning aids and by tilting the head holder laterally. The surgeon needs to define the degree of lateral positioning on the Transfer Board. Secure the patient with the straps. Please note: You can use the MR Safe or MR Conditional hose holders to secure the breathing hoses. ? 1 1 1 2 2 2 3 3 3 4 4 4 Safety Information for Patient Positioning 1 General safety information Dangerous currents may be generated if parts of the patient's body form loops, and may result in burns. To avoid loop formation, always ensure correct patient positioning. Always position the patient on the Transfer Board so that the patient's arms are aligned with the torso and ensure that hands, arms, and legs do not touch the body-skin or form loops (minimum distance: 5 mm). PRIOR to the surgical procedure, position the patient on the Transfer Board in a way that is suitable for the MR scan. Keep in mind that the position cannot be altered after draping.. Please select the numbers to learn more. Safety Information for Patient Positioning [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0014.mp3] When you position the patient on the Transfer Board, please observe these safety instructions. Dangerous currents may be generated if parts of the patient's body form loops, and may result in burns. To avoid loop formation, always ensure correct patient positioning. Always position the patient on the Transfer Board so that the patient's arms are aligned with the torso and ensure that hands, arms, and legs do not touch the body-skin or form loops. PRIOR to the surgical procedure, position the patient on the Transfer Board in a way that is suitable for the MR scan. Keep in mind that the position cannot be altered after draping. [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0015.mp3] Ensure adequate fixation of the patient during transport to prevent the patient from falling off the table. When using the table for patient transportation, always use straps to secure the patient’s body and extremities! If the patient is positioned in the feet first orientation, the feet of the patient may slide down from the head end of the Transfer Board! If you position the patient in the feet first orientation, always secure the lower legs and feet with straps. [ndt_maq-wfl_1_11_3.wav] = [ndt_art-wfl_1_11_3.wav] Possible collisions between accessories and the MR system could lead to injury. To avoid collisions, prior to positioning the patient, ensure that the patient with all necessary accessories applied, for example, coils, clamps, navigation adapters etc., will fit into the magnet bore. [ndt_maq-wfl_1_11_4.wav] Please do not exceed the maximum load of the head holder. The head holder and pins may break, resulting in severe patient injury! Never lean on the head holder! Please also consider the risk of severe patient injury due to anaphylactic shock. This can be caused by contact of injured skin with surfaces of the system, which may cause mild to severe allergic reactions. Please always cover injured skin with bandages or drapes to avoid contact with the system surface. 4 WARNING Maximum load of the head holder Please do not exceed the maximum load of the head holder! Head holder and pins may break, resulting in severe patient injury! Never lean on the head holder. Severe patient injury due to anaphylactic shock Contact of injured skin with surfaces of the system may cause mild to severe allergic reactions. Cover injured skin with bandages or drapes to avoid contact with system surface. 3 Possible collisions between accessories and the MR system could lead to injury! To avoid collisions, prior to positioning the patient, ensure that the patient with all necessary accessories applied (for example, coils, clamps, navigation adapters etc.) will fit into the magnet bore. 2 Ensure adequate fixation of the patient during transport! Patient can fall off the table! When using the table for patient transportation, always use straps to secure the patient’s body and extremities! CAUTION: If the patient is positioned in the feet first orientation, the feet of the patient may slide down from the head end of the Transfer Board! If you position the patient in the feet first orientation, always secure the lower legs and feet with straps. Knowledge Check You have just learned how to prepare patient transfers with the MAQUET version of the Nexaris Dockable Table. Select Start to test your knowledge of the presented content in the following three questions. Start ? Knowledge Check ? Select three (3) answers. Question 1 of 3 What should you check when preparing the equipment for the transfer workflow? For head examinations with lowered head holder: Spine coil is removed; space for the head holder is free. The correct OR tabletop (transfer tabletop) is ready for use. The battery of the Nexaris Dockable Table is fully charged. The correct Transfer Board, padding, fixation straps, and head holder (including bore gauge) or head plate extension are ready for use. Question 1 of 3 Incorrect One or more answers are incorrect. Correct ? Select three (3) answers. Question 2 of 3 Which steps are necessary to prepare the Nexaris Dockable Table and the OR table for the transfer workflow? Undock the Nexaris Dockable Table from the MR system and move it to the OR table. Attach the ARTIS Docking Adapter to the Nexaris Dockable Table. Position the cushions for padding on the Transfer Board. Place and lock the Transfer Board onto the OR table. Question 2 of 3 Incorrect One or more answers are incorrect. Correct ? Select three (3) answers. Question 3 of 3 What do you have to consider when positioning the patient on the Transfer Board? Ensure that parts of the patient's body do not form loops. Always use straps to secure the patient’s body and extremities. Do not position the patient in the feet first orientation. If using a non-Siemens head holder, always use the corresponding bore gauge to check for potential collisions between the head holder with equipment attached, and the MR system. Question 3 of 3 Incorrect One or more answers are incorrect. Correct Knowledge Check Completion Review Retry Retry Continue Continue ? You have just completed the Knowledge Check. Select Review to assess how your responses compare to the correct answers. Select Retry to test your knowledge again or select Continue to advance through the course. Knowledge Check Completion ? Transfer Workflow: OR Table Nexaris Dockable Table Transfer Workflow: OR Table -> Nexaris Dockable Table [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0018.mp3] You have prepared and secured the patient on the OR table. Now you can start transferring the patient from the OR table to the Nexaris Dockable Table. Therefore you need to dock the two tables. Then transfer the board with the patient lying on it. And finally undock the tables again. Learn how to do this on the following pages. ? 1 1 1 2 2 2 3 3 3 1 Docking to the OR Table – Overview The Nexaris Dockable Table and the OR table must be correctly positioned before you can interlock them and move the Transfer Board. Both tables must be positioned in a line and at the same height. (1) Side view (2) Top view Please select the numbers to learn more. 1 2 Docking to the OR Table – Overview [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0019.mp3] The Nexaris Dockable Table and the OR table must be correctly positioned before you can interlock them and move the Transfer Board. Both tables must be positioned in a line and at the same height. The images show the side and top view of the alignment of the two tables when the Nexaris Dockable Table is docked to the OR table. [ndt_maq-wfl_1_18_2.wav] To ensure that both tables are at the same height, the Nexaris Dockable Table must be in the Home Position and the OR table must be in the TRANSFER MRI position. In some cases, a MAQUET adapter must be mounted on the OR table. For details regarding adapters or different OR table positions, please refer to the operator manual supplied by Getinge. [ndt_maq-wfl_1_18_3.wav] Please be aware that if the Nexaris Dockable Table is positioned at the wrong height, the transfer of the Transfer Board is not possible. Also, the head holder may collide with the Nexaris Dockable Table, resulting in a high risk of patient injury. Please set the Nexaris Dockable Table to the Home Position before moving to the OR table and ensure that the OR table is in the TRANSFER MRI position (which is the transfer height). For additional information, please refer to the operator manual of the OR table supplied by Getinge and the operator manual of the head holder. Learn more about the workflow for docking the Nexaris Dockable Table to the OR table on the next page. 3 WARNING If the Nexaris Dockable Table is positioned at the wrong height for transfer to the OR table: The transfer of the Transfer Board is not possible. The head holder may collide with the Nexaris Dockable Table, resulting in a high risk of patient injury. Set the Nexaris Dockable Table to the Home Position before moving to the OR table and ensure that the OR table is in the TRANSFER MRI position (transfer height). For additional information, please refer to the operator manual of the OR table supplied by Getinge and the operator manual of the head holder. 2 The Nexaris Dockable Table must be in the Home Position and the OR table must be in the TRANSFER MRI position. In some cases, a MAQUET adapter must be mounted on the OR table. For details regarding adapters or different OR table positions, please refer to the operator manual supplied by Getinge. 1 2 (1) Side view (2) Top view ? 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 1 Docking to the OR Table – Workflow Please select the numbers to learn more. Prepare the OR table for docking: Set the OR table to the TRANSFER MRI position/height. Depending on the OR table: Pull out the centering aids on both sides of the OR table: Pull the release button of the centering aid and push the centering aid toward the end of the tabletop. – or – If necessary, mount the appropriate MAQUET adapter to dock the Nexaris Dockable Table onto the OR table. For details, please refer to the operator manual supplied by Getinge. Docking to the OR Table – Workflow [ndt_maq-wfl_1_19_1.wav] In order to prepare the OR table for docking, please set the OR table to the TRANSFER MRI position and height. Depending on the OR table: Pull out the centering aids on both sides of the OR table: to do this, pull the release button of the centering aid and push the centering aid toward the end of the tabletop. – or – If necessary, mount the appropriate MAQUET adapter to dock the Nexaris Dockable Table onto the OR table. For details, please refer to the operator manual supplied by Getinge. [ndt_maq-wfl_1_19_2.wav] Next, press the Home Position button on the Nexaris Dockable Table user interface to set the transfer height. Fold down the handles at the foot end of the Nexaris Dockable Table. This is done by pushing the buttons on the handles and folding them down. [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0024.mp3] Now position the Nexaris Dockable Table in line with the OR table. To do this, a minimum of two people is required, one standing on either side of the table. Move the Nexaris Dockable Table slowly. Constantly observe the draped patient's head in the head holder. [ndt_maq-wfl_1_19_4.wav] Move the Nexaris Dockable Table to the OR table carefully and in a straight line. Ensure that the interface box of the Nexaris Dockable Table is inside the centering aids of the OR table. [ndt_maq-wfl_1_19_5.wav] Check that both tables are positioned edge to edge, and realign the Nexaris Dockable Table if necessary. The locking bolts at the foot end of the Nexaris Dockable Table slide back into the recesses. The locking mechanisms for the Transfer Board on the Nexaris Dockable Table and on the OR table will be unlocked. [ndt_maq-wfl_1_19_6.wav] Finally, secure both tables against unintended movements. To lock the OR table, move both locking levers of the centering aids into the vertical position. To immobilize the Nexaris Dockable Table, apply the brake by pressing the Brake button on the table user interface. If the tables are docked, ensure that they are not moved: Do not use the remote control of the OR table. And do not use the buttons on the table user interface to lower or lift the Nexaris Dockable Table. 6 Secure both tables against unintended movements. To lock the OR table, move both locking levers of the centering aids into the vertical position. To immobilize the Nexaris Dockable Table, apply the brake by pressing the Brake button on the table user interface. If the tables are docked, ensure that they are not moved: Do not use the remote control of the OR table. Do not use the buttons on the table user interface to lower or lift the Nexaris Dockable Table. 5 Check that both tables are positioned edge to edge, and realign the Nexaris Dockable Table if necessary. The locking bolts at the foot end of the Nexaris Dockable Table slide back into the recesses. The locking mechanisms for the Transfer Board on the Nexaris Dockable Table and on the OR table will be unlocked. 4 Move the Nexaris Dockable Table to the OR table carefully and in a straight line. Eensure that the interface box of the Nexaris Dockable Table is inside the centering aids of the OR table. 3 Position the Nexaris Dockable Table in line with the OR table. To do this, a minimum of two people is required, one standing on either side of the table. Move the Nexaris Dockable Table slowly. Constantly observe the draped patient's head in the head holder. 2 Press the Home Position button on the Nexaris Dockable Table user interface to set the transfer height. Fold down the handles at the foot end of the Nexaris Dockable Table. Push the buttons on the handles and fold the handles down. ? 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 1 Transferring the Transfer Board to the Nexaris Dockable Table When the Nexaris Dockable Table is docked to the OR table, the Transfer Board can be moved from one table to the other. Prior to starting the transfer, always check that there are no obstacles (for example clothing, straps or coils) between the tables. The Nexaris Dockable Table is docked to the OR table and immobilized with the brake. The locking bolts are unlocked. Please select the numbers to learn more. Transferring the Transfer Board to the Nexaris Dockable Table [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0028.mp3] When the Nexaris Dockable Table is docked to the OR table, the Transfer Board can be moved from one table to the other. Prior to starting the transfer, always check that there are no obstacles (for example, clothing, straps, or coils) between the tables. For a smooth workflow, ensure that the Nexaris Dockable Table is docked to the OR table and immobilized with the brake. Make sure that the locking bolts of the transfer board on the OR table are unlocked. [Nexaris Dockable Table MAQUET Workflow_OLT_part_1-0029.mp3] Check that the stop mechanism for the Transfer Board on the Nexaris Dockable Table is open. Pull up the knob, using the lever located on the right side at the foot end, and turn it. Next, unlock the lever for locking the Transfer Board on the OR table. Pull out the safety sleeve and move the lever into the horizontal position. For details, please refer to the operator manual supplied by Getinge. The Transfer Board can now be transferred. [ndt_maq-wfl_1_20_3.wav] Slide the Transfer Board carefully from the OR table to the Nexaris Dockable Table up to the end stop. Slide the Transfer Board with two persons, one standing on each side of the table. [ndt_maq-wfl_1_20_4.wav] After the transfer, lock the Transfer Board on the Nexaris Dockable Table so that the Transfer Board cannot slide back. To do this, pull up the knob using the lever and turn it. The Transfer Board is then locked. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0002.mp3] The Transfer Board is positioned and secured on the Nexaris Dockable Table. You can now undock the tables. Please note that there is an additional interlocking bolt on the right side of the tabletop. It pops up automatically as soon as the tabletop moves into the magnet bore. 5 The Transfer Board is positioned and secured on the Nexaris Dockable Table. You can now undock the tables. Please note: There is an additional interlocking bolt on the right side of the tabletop. It pops up automatically as soon as the tabletop moves into the magnet bore. 4 Lock the Transfer Board on the Nexaris Dockable Table so that the Transfer Board cannot slide back: To do this, pull up the knob using the lever and turn it. The Transfer Board is then locked. 3 Slide the Transfer Board carefully from the OR table to the Nexaris Dockable Table up to the end stop. Slide the Transfer Board with two persons, one standing on each side of the table. 2 Check that the stop mechanism for the Transfer Board on the Nexaris Dockable Table is open: Pull up the knob using the lever, located on the right side at the foot end, and turn it. Unlock the lever for locking the Transfer Board on the OR table. Pull out the safety sleeve and move the lever into the horizontal position. The Transfer Board can be transferred. ? Undocking from the OR Table and Moving to the MR System The Transfer Board is positioned and secured on the Nexaris Dockable Table. Unlock the OR table: Move the lever of the centering aids into the horizontal position. For details, please refer to the operator manual supplied by Getinge. Release the brake on the Nexaris Dockable Table: Press the Brake button on the table user interface. 1 1 1 2 2 2 1 Please select the numbers to learn more. Undocking from the OR Table and Moving to the MR System [ndt_maq-wfl_1_21_1.wav] Before you undock the Nexaris Dockable Table from the OR table, please ensure that the Transfer Board is positioned and secured on the Nexaris Dockable Table. Then unlock the OR table by moving the lever of the centering aids into the horizontal position. For details, please refer to the operator manual supplied by Getinge. Next, release the brake on the Nexaris Dockable Table by pressing the Brake button on the table user interface. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0004.mp3] After the brakes are released, move the Nexaris Dockable Table away from the OR table. When the Nexaris Dockable Table is undocked, the two locking bolts at its foot end move up automatically. This prevents the Transfer Board from sliding back. Fold up the handles at the foot end of the Nexaris Dockable Table and move the table to the MR system. Move the Nexaris Dockable Table away from the OR table. When the Nexaris Dockable Table is undocked, the two locking bolts at its foot end move up automatically. This prevents the Transfer Board from sliding back. Fold up the handles at the foot end of the Nexaris Dockable Table and move the table to the MR system. 2 ? Docking to the MR System and Starting the Examination Dock the Nexaris Dockable Table to the MR system. If required, position additional coils and connect them. If the MR system and the OR table are installed in the same room, switch off the OR table for the MR examination to avoid possible image artifacts. For details, please refer to the operator manual supplied by Getinge. 2 2 2 1 1 1 1 Please select the numbers to learn more. Docking to the MR System and Starting the Examination [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0005.mp3] Now dock the Nexaris Dockable Table to the MR system. Remember: this is done using the Docking/Undocking button on the table user interface. If required, position additional coils and connect them. If the MR system and the OR table are installed in the same room, switch off the OR table for the MR examination to avoid possible image artifacts. For details, please refer to the operator manual supplied by Getinge. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0006.mp3] Please keep in mind, that during the examination the patient table moves automatically. It may remove drapes or pull out tubes from the patient! To avoid severe patient injury, before starting the examination, make sure that tubes or drapes will not be squeezed, caught, or clamped by automatic table movements. Then perform the examination. Always remain in contact with the patient visually and acoustically during the examination, especially with helpless patients. To avoid severe patient injury Before starting the examination, make sure that tubes or drapes will not be squeezed, caught, or clamped by automatic table movements. Always remain in contact with the patient visually and acoustically during the examination, especially with helpless patients. Perform the examination 2 ? Transfer Workflow: Nexaris Dockable Table OR Table Transfer Workflow: Nexaris Dockable Table –> OR Table [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0007.mp3] You have finished the MR examination.Now return to the OR table and start transferring the patient back from the Nexaris Dockable Table to the OR table. This is basically the same transfer workflow as before, in reverse order. ? Returning to the OR Table (After the Examination) MR examination is complete. Prepare the OR table for docking. Set the TRANSFER MRI position/height and pull out the centering aids. For details, please refer to the operator manual supplied by Getinge. Undock the Nexaris Dockable Table from the MR system (Docking/Undocking button on table user interface). Press the Home Position button on the Nexaris Dockable Table. Move the Nexaris Dockable Table to the OR table. Please select the numbers to learn more. 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 1 Returning to the OR Table [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0008.mp3] Make sure the MR examination is complete, and all data has been acquired. Then follow these steps for a smooth patient transfer. First, prepare the OR table for docking. Set the TRANSFER MRI position and height and pull out the centering aids. For details, please refer to the operator manual supplied by Getinge. Then undock the Nexaris Dockable Table from the MR system. Press the Docking/Undocking button on the table user interface. Press the Home Position button on the Nexaris Dockable Table to set transfer height. Then move the Nexaris Dockable Table to the OR table. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0009.mp3] Fold down the handles at the foot end of the Nexaris Dockable Table by pushing the buttons on the handles and folding them down. Then position the Nexaris Dockable Table in a line with the OR table. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0010.mp3] Move the Nexaris Dockable Table to the OR table carefully and in a straight line. Ensure that the interface box of the Nexaris Dockable Table is inside of the centering aids of the OR table. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0011.mp3] Check that both tables are positioned edge to edge. If necessary align the Nexaris Dockable Table anew. The locking bolts at the foot end of the Nexaris Dockable Table slide back into the recesses. The locking mechanisms for the Transfer Board on both tables will be unlocked. To lock the OR table, move the lever of the centering aids into the vertical position. For details, please refer to the operator manual supplied by Getinge. [ndt_maq-wfl_1_24_5.wav] Apply the brake by pressing the Brake button on the table user interface to immobilize the Nexaris Dockable Table. You can now transfer the Transfer Board from the Nexaris Dockable Table onto the OR table. 5 Apply the brake (press the Brake button on the table user interface) to immobilize the Nexaris Dockable Table. You can now transfer the Transfer Board from the Nexaris Dockable Table onto the OR table. 4 Check that both tables are positioned edge to edge. If necessary align the Nexaris Dockable Table anew. The locking bolts at the foot end of the Nexaris Dockable Table slide back into the recesses. The locking mechanisms for the Transfer Board on both tables will be unlocked. To lock the OR table, move the lever of the centering aids into the vertical position. For details, please refer to the operator manual supplied by Getinge. 3 Move the Nexaris Dockable Table to the OR table carefully and in a straight line. Ensure that the interface box of the Nexaris Dockable Table is inside of the centering aids of the OR table. 2 Fold down the handles at the foot end of the Nexaris Dockable Table: Push the button on the handle and fold the handle down. Position the Nexaris Dockable Table in a line with the OR table. ? 1 1 1 2 2 2 3 3 3 1 Transferring the Transfer Board to the OR Table The Nexaris Dockable Table is docked to the OR table and immobilized with the brake. The locking bolts are unlocked. Unlock the lever for locking the Transfer Board on the OR table. Pull out the safety sleeve and move the lever into the horizontal position. For details, please refer to the operator manual supplied by Getinge. Please select the numbers to learn more. 4 4 4 Transferring the Transfer Board to the OR Table [ndt_maq-wfl_1_25_1.wav] Make sure the Nexaris Dockable Table is docked to the OR table and immobilized with the brake. Also ensure that the locking bolts are unlocked. Then unlock the lever for locking the Transfer Board on the OR table: Pull out the safety sleeve and move the lever into the horizontal position. For details, please refer to the operator manual supplied by Getinge. [ndt_maq-wfl_1_25_2.wav] If there are coils positioned on the patient, disconnect the coil plugs and secure the coil cables. Please note: To avoid patient injury or damage to the system, always unplug the coils used for MR imaging before you transfer the Transfer Board to the OR table! Open the stopping mechanism for the Transfer Board on the Nexaris Dockable Table: Pull up the knob using the lever and turn it. The Transfer Board can be transferred. [ndt_maq-wfl_1_25_3.wav] Slide the Transfer Board carefully from the Nexaris Dockable Table to the OR table up to the end stop. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0016.mp3] Next, secure the Transfer Board on the tabletop of the OR table. Close the lever for locking the Transfer Board. For example, pull out the safety sleeve and move the lever into the vertical position. For details, see the operator manual of the OR table supplied by Getinge. The Transfer Board is positioned and secured on the OR table. You can now undock the Nexaris Dockable Table from the OR table. 4 Secure the Transfer Board on the tabletop of the OR table. Close the lever for locking the Transfer Board. For example, pull out the safety sleeve and move the lever into the vertical position. For details, see the operator manual of the OR table supplied by Getinge. The Transfer Board is positioned and secured on the OR table. You can now undock the Nexaris Dockable Table from the OR table. 3 Slide the Transfer Board carefully from the Nexaris Dockable Table to the OR table up to the end stop. 2 If there are coils positioned on the patient, disconnect the coil plugs and secure the coil cables. Open the stopping mechanism for the Transfer Board on the Nexaris Dockable Table. Pull up the knob using the lever and turn it. The Transfer Board can be transferred. ? Cleaning and Disinfection Cleaning and Disinfection [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0017.mp3] Cleaning and disinfecting the system is important to prevent patients and personnel from getting into contact with infectious substances. In this chapter, you will learn where to find further information on cleaning and disinfecting the system. We will also look at how to clean the guide rails. ? Instructions for Cleaning and Disinfection Please refer to the Operator Manual MR System and Coils and follow the general cleaning instructions for: Nexaris Dockable Table Nexaris Spine 36 coil Cushions Nexaris Head Frame There you will also find further information about disinfecting the system. 1 1 1 2 2 2 3 3 3 1 Please select the numbers to learn more. Instructions for Cleaning and Disinfection [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0018.mp3] Please refer to the Operator Manual MR System and Coils and follow the general cleaning instructions for: the Nexaris Dockable Table, the Nexaris Spine 36 coil, the cushions, and the Nexaris Head Frame. There you will also find further information about disinfecting the system. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0019.mp3] Prior to cleaning, remove the guide rails from the Nexaris Dockable Table tabletop. Lift the guide rails and remove them from the tabletop. Clean the guide rails with a damp cloth or cotton ball. Use only water or a lukewarm solution of water and a household cleaner. When installing the guide rails on the tabletop, ensure that the end stops for the Transfer Board are positioned at the head end of the tabletop. [ndt_maq-wfl_1_27_3.wav] For cleaning instructions concerning the OR table, the MAQUET Transfer Board, and straps, see the operator manuals supplied by Getinge. For cleaning instructions concerning the OR head holder, see the head holder operator manual. And for cleaning instructions concerning 3rd party vendor coils, please refer to the corresponding operator manual. Cleaning the OR table, MAQUET Transfer Board and straps For cleaning instructions concerning the OR table, the MAQUET Transfer Board, and straps, see the operator manuals supplied by Getinge. Cleaning the OR head holder For cleaning instructions concerning the OR head holder, see the head holder operator manual. Cleaning 3rd party vendor coils For cleaning instructions concerning 3rd party vendor coils, please refer to the corresponding operator manual. 3 Cleaning the guide rails Prior to cleaning, remove the guide rails from the Nexaris Dockable Table tabletop. Lift the guide rails and remove them from the tabletop. Clean the guide rails with a damp cloth or cotton ball. Use only water or a lukewarm solution of water and a household cleaner. When installing the guide rails on the tabletop, ensure that the end stops for the Transfer Board are positioned at the head end of the tabletop. 2 ? General Safety Information General Safety Information [ndt_maq-wfl_1_28.wav] = [ndt_art-wfl_1_31.wav] This concluding chapter is about safety instructions when using the Nexaris Dockable Table. You will learn what needs to be observed in order to avoid injuries to the patient and the operating personnel. ? Safety Information for Operation and Workflow 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 1 Please select the numbers to learn more. Lowered head holder may collide with the Nexaris Spine 36 To avoid severe patient injury Prepare the tabletop and other equipment depending on the planned examination. For head examinations: If you need to lower the head holder, remove the Nexaris Spine 36. Remove all equipment on the Nexaris Dockable Table under the Transfer Board to avoid drapes or other accessories from getting caught. For whole body examinations: Use the Nexaris Spine 36. Never lower the head holder if the Nexaris Spine 36 is positioned. Safety Information for Operation and Workflow [ndt_maq-wfl_1_29_1.wav] Please note that the lowered head holder may collide with the Nexaris Spine 36. To avoid severe patient injury Please always prepare the tabletop and other equipment depending on the planned examination. For head examinations: If you need to lower the head holder, remove the Nexaris Spine 36 first. Remove all equipment on the Nexaris Dockable Table under the Transfer Board to avoid drapes or other accessories from getting caught. For whole body examinations: Use the Nexaris Spine 36. Never lower the head holder if the Nexaris Spine 36 coil is positioned. [ndt_maq-wfl_1_29_2.wav] The head holder may also collide with the Tim coil interface. To avoid severe patient injury Please connect the Tim coil interface only after the patient has been transferred from the OR table to the Nexaris Dockable Table. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0024.mp3] During the operation of the table, anticipate vibrations or unbalanced weight. Avoid vibrations during transfer or docking. Always move the Nexaris Dockable Table and the Transfer Board slowly and carefully. Be particularly careful with children or infants, as the load on the Transfer Board might be unbalanced. In this case, manually support the Transfer Board during transfer. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0025.mp3] Please always pay attention to the horizontal movement of the Nexaris Dockable Table! In order to avoid injury to the patient and other persons: Please ensure that there are no obstacles between the table and the magnet.. For example no protruding or overhanging body parts, hair, clothing or straps, Also ensure that additional equipment, for example I-V tubes, respirator or ECG, does not get caught. They need to remain safely in and on the patient when moving the tabletop. Secure the patient’s arms and legs with straps, so that the patient is not caught between the tabletop and the magnet cover. Observe the patient visually and acoustically. In the event of hazardous conditions, press the Table Stop button. [Nexaris Dockable Table MAQUET Workflow_OLT_part_2-0026.mp3] To avoid severe patient injury, please always use the table lock switch to avoid unintended movements during interventions. Also ensure that no fingers or other objects are in between the interface box and the movable tabletop during horizontal movements. 5 Unintended table movements To avoid severe patient injury: Always use the table lock switch to avoid unintended movements during interventions. Pinching hazards during horizontal table movements To avoid injury to operating personnel: Ensure that no fingers or other objects are in between the interface box and the movable tabletop during horizontal movements. 4 Horizontal movement of the Nexaris Dockable Table Avoid injury to patient and other persons Ensure that there are no obstacles (e.g. protruding or overhanging body parts, hair, clothing, straps) between the table and the magnet. Ensure that additional equipment (e.g. IV tube, respirator or ECG) does not get caught and remains in and on the patient when moving the tabletop. Secure the patient’s arms and legs with straps so that the patient is not caught between the tabletop and the magnet cover. Observe the patient visually and acoustically. In the event of hazardous conditions, press the Table Stop button. 3 Vibrations & unbalanced weight To avoid patient injury Avoid vibrations during transfer or docking. Always move the Nexaris Dockable Table and the Transfer Board slowly and carefully. Be particularly careful with children or infants, as the load on the Transfer Board might be unbalanced. In this case, manually support the Transfer Board during transfer. 2 Head holder may collide with the Tim coil interface To avoid severe patient injury Connect the Tim coil interface only after the patient has been transferred from the OR table to the Nexaris Dockable Table. ? Course Review Congratulations. You have completed the Nexaris Dockable Table MAQUET Workflow Online Training. Select the numbered buttons below to review the material before proceeding to the final assessment. Remember general safety information Carry out cleaning and disinfection Carry out transfer: Nexaris Dockable Table OR table Carry out transfer: OR table Nexaris Dockable Table Carry out preparations for transfer workflow 1 1 2 2 2 3 3 3 4 4 5 5 Course Review Remember General Safety Information Observe the patient visually and acoustically. In the event of hazardous conditions, press the Table Stop button. Always use the table lock switch to lock the table and avoid unintended movements during interventions. Ensure that none of your fingers or other objects are in between the interface box and the movable tabletop during horizontal movements. 2 2 1 1 2 Please select the X to close the pop-up Remember General Safety Information If you need to lower the head holder, remove the Nexaris Spine 36. Connect the Tim coil interface only after the patient has been transferred from the OR table to the Nexaris Dockable Table. Always move the Nexaris Dockable Table and the Transfer Board slowly and carefully to avoid vibrations during transfer or docking. Ensure that there are no obstacles between the table and the magnet and that additional equipment does not get caught when moving the tabletop. 2 2 1 1 1 Please select step 2 to continue. Carry Out Cleaning and Disinfection Always take precautions to prevent patients or personnel from contact with potentially infectious substances. Guide Rails: Remove the guide rails from the tabletop and clean them with a damp cloth or cotton ball. When installing the guide rails on the tabletop, ensure that the end stops for stopping the Transfer Board are positioned at the head end of the tabletop. For more information about cleaning and disinfecting the system and accessories, please consult the Operator Manual MR System and Coils. For instructions on how to clean the OR table, MAQUET transfer board, head holder, and 3rd party vendor coils, refer to the corresponding manufacturer's (e.g. Getinge) operator manuals. Carry Out Transfer: NDT OR Table Unlock the connection of the tables (lever of centering aids in horizontal position) and the NDT (release the brake), and pull the NDT away from the OR table. 2 2 1 1 Please select the X to close the pop-up. 3 3 3 Carry Out Transfer: NDT OR Table Lock the OR table (lever of centering aids in vertical position) and apply the brake of the NDT (Brake button). Transfer Board: Open the lever at the foot end of the NDT. Unlock the lever on the OR table, slide the Transfer Board onto the OR table up to the end stop, and lock the Transfer Board on the OR table. 2 2 1 1 2 Please select step 3 to continue. 3 3 Carry Out Transfer: NDT OR Table Unplug the coils and undock the Nexaris Dockable Table (NDT) from the MR system. Set the NDT to Home Position and fold down the handles at the foot end. Set the OR table to the TRANSFER MRI position and mount the docking adapter or pull out the centering aids and unlock them (lever in horizontal position). Align the NDT with the OR table and dock the NDT to the OR table. 2 2 1 1 1 Please select step 2 to continue. 3 3 Carry Out Transfer: OR Table NDT Unlock the connection of the tables (lever of centering aids in horizontal position) and the NDT (release the brake), and pull the NDT away from the OR table. Move and dock the NDT to the MR system, then connect the coils. Make sure that squeezing, catching and clamping of tubes or drapes due to automatic table movements will not occur. Perform the examination. 2 2 Please select the X to close the pop-up. 3 3 3 1 1 Carry Out Transfer: OR Table NDT Lock the connection of the tables (lever of centering aids in vertical position) and apply the brake of the NDT (Brake button). Transfer Board: Unlock the Transfer Board from the OR table. Open the lever at the foot end of the NDT, slide the Transfer Board onto the NDT until it reaches the end stop, and close the knob with lever on the NDT again. 2 2 2 Please select step 3 to continue. 3 3 1 1 Carry Out Transfer: OR Table NDT Set the Nexaris Dockable Table (NDT) to Home Position and fold down the handles at the foot end. Set the OR table to the TRANSFER MRI position, then, if necessary, mount the docking adapter on the OR table or pull out the centering aids and unlock them (lever in horizontal position). Align the NDT with the OR table with at least two persons, and dock the NDT to the OR table. Avoid collisions! 2 2 1 1 1 Please select step 2 to continue. 3 3 Carry Out Preparations for Transfer Workflow Preparing the patient (2/2) For head examinations: Pin the patient’s head in the head holder and check for collisions with the head holder bore gauge. For body examinations: In the feet first orientation, secure the lower legs and feet with straps so they cannot slide down from the Transfer Board and get squeezed. 2 2 Please select the X to close the pop-up. 3 3 1 1 4 4 5 5 5 Carry Out Preparations for Transfer Workflow Preparing the patient (1/2) Perform the patient preparation, review the MR Safety Screening form, and check for any metallic objects, tattoos, etc., outside of the MR room. Check that the cushions for padding are on the Transfer Board on the OR table and position the patient on the Transfer Board. Check the correct patient position (no current loops, avoid possible collisions and entrapment). Secure the patient with straps. 2 2 Please select step 5 to continue. 3 3 1 1 4 4 5 5 4 Carry Out Preparations for Transfer Workflow Preparing the examination Undock the Nexaris Dockable Table from the MR system. Move the Nexaris Dockable Table up to the OR table. Fold down the handles at the foot end. Place and lock the Transfer Board onto the OR table. Movement to TRANSFER MRI position is only possible if this locking mechanism is closed. 2 2 Please select step 4 to continue. 3 3 1 1 4 4 5 5 3 Carry Out Preparations for Transfer Workflow Preparing the equipment (2/2) The Transfer Board, padding, fixation straps, and head holder (including bore gauge) or head plate extension are ready for use. The Tim coil interface is ready for use (if needed). The MR system is ready for measurement and the patient has been registered. Check the table lock switch (daily) and the emergency undocking of the Nexaris Dockable Table (once a week). 2 2 1 1 2 Please select step 3 to continue. 3 3 4 4 5 5 Carry Out Preparations for Transfer Workflow Preparing the equipment (1/2) The Nexaris Dockable Table is ready for use. For head examinations with lowered head holder: Spine coil is removed; space for the head holder is free. The OR table is ready for use (if necessary, including interface adapter). The correct OR tabletop (transfer tabletop and the correct Transfer Board) is ready for use. Depending on the OR table used, the foot-end Transfer Board stop plate or the docking adapter is inserted. 2 2 1 1 1 Please select step 2 to continue. 3 3 4 4 5 5 Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com ? Disclaimer Assessment Start ? This assessment will test your retention of the presented content. A passing score of 80% or higher is required to complete the course and earn your certificate . Assessment questions must be answered completely to receive full credit. Partial credit will not be given for assessment questions that require multiple answers. You may repeat the assessment as many times as needed. Assessment Select the best answer. ? Position both tables in a line. Mount a MAQUET adapter on the OR table. Question 1 of 5 Which step is only necessary in some cases to prepare the Nexaris Dockable Table and the OR table for docking? Set the Nexaris Dockable Table to Home Position. Set the OR table to TRANSFER MRI position. Question 1 of 5 Incorrect Incorrect Both tables must always be positioned in a line to prepare them for docking. Incorrect The OR table must always be set to TRANSFER MRI position to prepare it for docking. Incorrect The Nexaris Dockable Table must always be set to Home Position to prepare it for docking. Select the best answer. ? You must unlock the Transfer Board from the OR table before starting the transfer. Question 2 of 5 Which statement about transferring the Transfer Board to the Nexaris Dockable Table (NDT) is correct? The Transfer Board should be moved from the OR table to the NDT by only one person. After the transfer, you must pull up the knob with the lever on the NDT and turn it to the padlock open symbol. Question 2 of 5 Incorrect Incorrect After the transfer, you must pull up the knob with the lever and turn it to the padlock locked symbol. Incorrect The Transfer Board should be moved from the OR table to the NDT by two persons. Select the correct designated area, then select Submit below. Question 3 of 5 Which button must be selected on the Nexaris Dockable Table to dock the table to the MR system? ? Question 3 of 5 Incorrect This is the Table On/Off button. Correct This is the Docking/Undocking button for docking/undocking the table to the MAGNETOM gantry. Incorrect This is the Home Position button for setting the transfer height. Incorrect This is the Brake button, used to apply or release the parking brake. Incorrect You did not select a designated area. Select the best answer. ? The end stops for stopping the Transfer Board should be positioned at the head end of the tabletop. Question 4 of 5 What should be considered when installing the guide rails on the tabletop after cleaning? The end stops for stopping the Transfer Board should be positioned at the foot end of the tabletop. The end stops for stopping the Transfer Board should be positioned at the head or foot end of the tabletop. Question 4 of 5 Incorrect Incorrect The end stops should be positioned at only one specific end of the table top. Incorrect The end stops should not be positioned at the foot end of the table top. ? Select three (3) answers. Question 5 of 5 Which of the following safety precautions apply to the horizontal movement of the Nexaris Dockable Table? Ensure that there are no obstacles between the NDT and the magnet. Ensure that additional equipment does not get caught and remains in and on the patient when moving the tabletop. In the event of hazardous conditions, leave the examination room as quickly as possible. Observe the patient visually and acoustically. Question 5 of 5 Incorrect One or more answers are incorrect. Correct Assessment Results YOUR SCORE: PASSING SCORE: Review Retry Retry Continue Continue Continue %Results.ScorePercent%% %Results.PassPercent%% ? Assessment Results You did not pass the course. Take time to review the assessment then select Retry to continue. Congratulations. You passed the course.. Exit To access your Certificate of Completion, select the Launch button drop down on the course overview page. You can also access the certificate from your PEPconnect transcript. ? You have completed the Nexaris Dockable Table MAQUET Workflow Online Training. Completion Navigation Help Select the icon above to open the table of contents. Click Next to continue. Next Welcome Slide The timeline displays the slide progression. Slide the orange bar backwards to rewind the timeline. Click Next to continue. Next Tmeline Select the X to close the pop-up. Click Next to continue. Next Layer Slide Select Submit to record your response. Click the X in the upper right corner to exit the navigation help. Assessment Slide Fragenbank 1 HOOD05162003348293 | Effective Date: 09 May 2023 1.1 Welcome 1.2 Navigation Hints 1.3 Workflow Overview 1.4 Workflow Overview – Video 1.5 Preparations 1.6 Preparing the Equipment 1.7 Preparing the Examination 1.8 Positioning the Transfer Board on the OR Table 1.9 Preparing the Patient 1.10 Positioning the Patient on the Transfer Board 1.11 Safety Information for Patient Positioning 1.12 Knowledge Check 1.17 Transfer Workflow: OR Table –> Nexaris Dockable Table 1.18 Docking to the OR Table – Overview 1.19 Docking to the OR Table – Workflow 1.20 Transferring the Transfer Board to the Nexaris Dockable Table 1.21 Undocking from the OR Table and Moving to the MR System 1.22 Docking to the MR System and Starting the Examination 1.23 Transfer Workflow: Nexaris Dockable Table –> OR Table 1.24 Returning to the OR Table 1.25 Transferring the Transfer Board to the OR Table 1.26 Cleaning and Disinfection 1.27 Instructions for Cleaning and Disinfection 1.28 General Safety Information 1.29 Safety Information for Operation and Workflow 1.30 Course Review 1.31 Disclaimer 1.32 Assessment