Atellica® Sample Handler Sample Processing Assessment Version 1.26 and Above

Continue Continue Continue Assessment Master Template HOOD05162003052540 | Effective Date: 26-Nov-2019 Atellica® Sample Handler Sample Processing Assessment This assessment covers the content in the Atellica® Sample Handler Sample Processing topic. Welcome Objectives It is recommended that the learning artifacts in the Sample Processing topic for the Atellica® Sample Handler are completed prior to taking this assessment. The objectives covered in these learning artifacts are: Process patient / STAT samples Load samples on the Sample Handler (SH) Monitor sample tube status using Samples Overview Check sample status Order patient tests manually, individually and by batch Print patient barcodes Monitor and review patient results View order status and manage results Print result reports Objectives Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica, and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc. or its affiliates. All other trademarks and brands are the property of their respective owners. © Siemens Healthcare GmbH 2022 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com Disclaimer Assessment This assessment will test your retention of the presented content. A passing score of 80% or higher is required to complete the course and earn your certificate. You may repeat the assessment as many times as needed. Start Assessment Ensure all sample containers are fully seated to the bottom of the rack Ensure all sample containers are fully seated to the bottom of the rack The arrow on the rack should be pointed out, away from the Sample Handler If only one rack is being loaded in a drawer, the drawer should only be pulled open halfway If only one rack is being loaded in a drawer, the drawer should only be pulled open halfway If only one rack is being loaded in a drawer, the drawer should only be pulled open halfway Which of the following is TRUE regarding loading samples on the Atellica® Sample Handler? Question 1 of 15 Select the best answer. Multiple Choice Question Incorrect The drawer should not be only opened halfway. Incorrect The arrow should not be pointed out, away from the Sample Handler. Correct STAT racks are racks placed in the first slot in each drawer STAT racks are racks placed in the first slot in each drawer STAT racks are racks placed in the first slot in each drawer STAT racks have a color-coded label on the front and sides to identify the rack as STAT STAT racks have a color-coded label on the front and sides to identify the rack as STAT STAT racks have a color-coded label on the front and sides to identify the rack as STAT STAT racks are identified as STAT in the Samples screen in the software STAT racks are identified as STAT in the Samples screen in the software STAT racks are identified as STAT in the Samples screen in the software How are Atellica® Sample Handler racks identified as STAT racks? Question 2 of 15 Select the best answer. Multiple Choice Question Incorrect This is not how STAT racks are identified. Correct The location of the rack in a drawer does not determine if the rack is a STAT rack. Incorrect Samples that are in the Cal-QC storage area Samples that are in the Cal-QC storage area Samples that are in the Cal-QC storage area Samples that are on the Atellica Magline® Transport Samples that are on the Atellica Magline® Transport Samples that are on the Atellica Magline® Transport Samples that are in SH drawers Samples that are in SH drawers Samples that are in SH drawers Information on what type of samples can be viewed on Samples Overview screen? Question 3 of 15 Select the best answer. Multiple Choice Question Incorrect This type of sample can be viewed on the Samples List screen Correct This type of sample can be viewed on the Samples List screen Correct Specify the analyzer, reagent lot, or specific reagent on which the order will be run Add additional tests to the order Add additional tests to the order Add additional tests to the order Add patient demographics to the sample information Add patient demographics to the sample information Add patient demographics to the sample information On the Create Patient Orders screen, what does the Edit System Test Options feature allow the operator to do? Question 4 of 15 Select the best answer. Multiple Choice Question Incorrect Patient demographics are not added in the Edit System Test Options feature. Incorrect Additional tests are not added in the Edit System Test Options feature. Correct Multiple tests are created by using the + icon in the Orders area of the Create Patient Orders screen Only the mean result will be reported Only the mean result will be reported Only the mean result will be reported Multiple tests are created by using the x icon in the Orders area of the Create Patient Orders screen Which of the following is TRUE when manually ordering multiple tests for a sample on the Atellica® Solution? Question 5 of 15 Select the best answer. Multiple Choice Question Incorrect Multiple tests are not created using the x icon. Incorrect The system does not automatically report a mean result. Correct Sample ID Sample ID Sample ID Sample collection and receipt date Sample collection and receipt date Sample collection and receipt date Sample comments Sample comments Sample comments Which of the following CANNOT be entered in the Sample Information area on the Creating Batch Orders by SID screen? Question 6 of 15 Select the best answer. Multiple Choice Question Incorrect This information can be entered in the Sample Information section. Incorrect This information can be entered in the Sample Information section. Correct View a specific batch order in detail, delete the batch order and/or make changes to the rack IDs View a specific batch order in detail, delete the batch order and/or make changes to the rack IDs View a specific batch order in detail, delete the batch order and/or make changes to the rack IDs Only deleting the batch order Only deleting the batch order Only deleting the batch order Only making changes to the rack IDs Only making changes to the rack IDs Only making changes to the rack IDs Which function(s) can be performed on the View Batch Orders screen? Question 7 of 15 Select the best answer. Multiple Choice Question Incorrect This is not the only function in the View Batch Orders screen. Incorrect This is not the only function in the View Batch Orders screen. Correct Create Patient Orders, Create Batch Orders by SID, Create Batch Orders by Rack ID, and Worklist Create Patient Orders, Create Batch Orders by SID, Create Batch Orders by Rack ID, and Worklist Create Patient Orders, Create Batch Orders by SID, Create Batch Orders by Rack ID, and Worklist Only on Worklist screen Only on Worklist screen Only on Worklist screen Only on Create Patient Orders screen Only on Create Patient Orders screen Only on Create Patient Orders screen In the Atellica® Solution software, which screen(s) enables operators to print a patient sample barcode? Question 8 of 15 Select the best answer. Multiple Choice Question Incorrect This is not the only screen that includes an option to print barcodes. Incorrect This is not the only screen that includes an option to print barcodes. Correct The starting and finishing sample IDs cannot match any sample IDs already active or pending in another batch, until that batch is closed The starting and finishing sample IDs cannot match any sample IDs already active or pending in another batch, until that batch is closed The starting and finishing sample IDs cannot match any sample IDs already active or pending in another batch, until that batch is closed The samples must be loaded on the system in sequential order The samples must be loaded on the system in sequential order The samples must be loaded on the system in sequential order The starting sample ID must end with a letter The starting sample ID must end with a letter The starting sample ID must end with a letter Which of the following are TRUE regarding creating batch orders by Sample ID? Question 9 of 15 Select the best answer. Multiple Choice Question Incorrect The starting sample ID can not end with a letter. Incorrect Samples do not need to be loaded in sequential order. Correct The Print button in the Tool bar The Print button on the Worklist screen The Reports button on the Worklist screen To print a patient results report, first filter the results on the Worklist screen and then select which button? Question 10 of 15 Select the best answer. Multiple Choice Question Incorrect There is not a Report button on the Worklist screen. Incorrect There is not a Print button on the Worklist screen. Correct Displays summary information about STAT samples on the system Displays summary information about STAT samples on the system Displays summary information about STAT samples on the system Provide a detailed list of test orders, results, and flags Provide a detailed list of test orders, results, and flags Provide a detailed list of test orders, results, and flags Provide a summary of the hardware errors that have occurred on the analyzers Provide a summary of the hardware errors that have occurred on the analyzers Provide a summary of the hardware errors that have occurred on the analyzers On the Atellica® Solution dashboard, what is the function of the STATs tile? Question 11 of 15 Select the best answer. Multiple Choice Question Incorrect The STATs tile does not provide a summary of hardware errors. Incorrect The STATs tile does not list test orders, results, or flags. Correct STATs Only screen STATs Only screen STATs Only screen Worklist screen Worklist screen Worklist screen Reagent Needs screen Reagent Needs screen Reagent Needs screen On the Atellica® Solution, which screen displays when the STATs tile is selected in the Dashboard? Question 12 of 15 Select the best answer. Multiple Choice Question Incorrect Selecting STATs tile does not open Reagent Needs screen. Incorrect Selecting STATs tile does not open Worklist screen. Correct Selecting a glyph will display a list of the meaning of all the sample status symbols Selecting a glyph will display a list of the meaning of all the sample status symbols Selecting a glyph will display a list of the meaning of all the sample status symbols The orders cannot be sorted by selecting column header The orders cannot be sorted by selecting column header The orders cannot be sorted by selecting column header The fields displayed can be configured with the Edit button The fields displayed can be configured with the Edit button The fields displayed can be configured with the Edit button Which of the following is TRUE regarding the Worklist screen on the Atellica® Solution? Question 13 of 15 Select the best answer. Multiple Choice Question Incorrect The fields displayed can not be configured with the Edit button. Incorrect The orders can be sorted by selecting column header. Correct Statistics Statistics Statistics Export Export Export Query LIS Query LIS Query LIS On the Worklist Overview screen, which button will provide data analytics such as Standard Deviation and Coefficient of Variation? Question 14 of 15 Select the best answer. Multiple Choice Question Incorrect The Query LIS button opens the LIS Batch Query screen, which is used to obtain a list of pending patient orders from the LIS. Incorrect The Export button opens the Export Test Results screen, which is used to export Patient or QC data, and the date range. Correct To order the same tests for samples in specific racks To order the same tests for samples in specific racks To order the same tests for samples in specific racks To order the same tests for a group of samples with specific Sample IDs To order the same tests for a group of samples with specific Sample IDs To order the same tests for a group of samples with specific Sample IDs To order the same tests for a group of samples loaded within a specific time frame To order the same tests for a group of samples loaded within a specific time frame To order the same tests for a group of samples loaded within a specific time frame On the Atellica® Solution, what is the function of the Create Batch Order by Rack ID screen? Question 15 of 15 Select the best answer. Multiple Choice Question Incorrect This is not the function of Create Batch Order by Rack ID screen. Incorrect This is not the function of Create Batch Order by Rack ID screen. Correct Review Review Retry Assessment Results %Results.ScorePercent%% %Results.PassPercent%% Continue YOUR SCORE: PASSING SCORE: Assessment Results You did not pass the course. Take time to review the assessment then select Retry to continue. Congratulations. You passed the course. Exit To access your Certificate of Completion, select the Launch button drop down on the course overview page. You can also access the certificate from your PEPconnect transcript. You have completed the Atellica® Sample Handler Sample Processing Assessment. Completion Atellica Sample Handler Sample Processing Assessment Storyboard 1.1 Welcome 1.2 Objectives 1.3 Disclaimer 1.4 Assessment 1.21 Completion