Atellica LumIQ Analyzer Preparing For Testing Job Aid

Atellica LumIQ Analyzer – SIEMENS Healthineers Preparing For Testing Preparing For Testing Atellica POC Solution Always follow your facility guidelines for testing and sample collection as well as for working with biohazard materials. Before running a test: SIEMENS Healthineers ➢ Use the urine sample within 2 hours of collection ➢ For hCG tests, use the urine sample immediately or up to 72 hours after collection if refrigerated at 2-8°C (36-46°F). Bring the refrigerated sample to room temperature before testing ➢ Test urine samples at room temperature SIEMENS Healthineers . ➢ Check that the analyzer Test Table and Insert are clean ➢ Keep the work area free of detergents and contaminants ➢ If you use a short urine test strip, 8cm (3 ¼ inches) in length, use the short Test Table Insert. You need to order this part separately for the analyzer Atellica UA Footnote/Source/Disclaimer 1 Effective Date: 17 DEC 2024| QR700016032 Unrestricted © Siemens Healthineers, 2023 SIEMENS Healthineers Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. Atellica LumIQ is not available for sale in the US and product availability cannot be guaranteed. Please contact Siemens customer service/ Siemens representative for availability in your area. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2025 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 Footnote/Source/Disclaimer 2 siemens-healthineers.com Effective Date: 17 DEC 2024| QR700016032 Unrestricted © Siemens Healthineers, 2023