Atellica® IM Analyzer Supply and Reagent Management Assessment Version 1.26 and Above

Continue Continue Continue Assessment Master Template HOOD05162003052540 | Effective Date: 26-Nov-2019 Atellica® IM Analyzer Supply and Reagent Management Assessment This assessment covers the content in the Atellica® IM Analyzer Supply and Reagent Management topic. Welcome Objectives It is recommended that the learning artifacts in the Supply and Reagent Management topic for the Atellica® IM Analyzer are completed prior to taking this assessment. The objectives covered in these learning artifacts are: Monitor the status of the supply and reagent inventories Load and unload supplies, consumables, and reagents Load and unload primary and ancillary reagent packs Load humidity packs Replace / empty supplies and waste Text with Image Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica, and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc. or its affiliates. All other trademarks and brands are the property of their respective owners. © Siemens Healthcare GmbH 2022 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com Disclaimer Assessment This assessment will test your retention of the presented content. A passing score of 80% or higher is required to complete the course and earn your certificate. You may repeat the assessment as many times as needed. Start Assessment Green: No reagents are below the operator configured threshold Green: No reagents are below the operator configured threshold Red: At least 2 reagents is below the operator configured threshold The alert threshold is configured in the Reagent Needs screen Which of the following statements is TRUE about the alert displays in the Reagent Needs tile on the dashboard? Question 1 of 10 Select the best answer. Multiple Choice Question Incorrect The alert threshold is configured in the Reagent Thresholds screen. Incorrect Red: At least 1 reagent is below the threshold. Correct Mix the pack a minimum of 20 times or until any clumps are broken up and no longer visible on the bottom of the pack, and no large aggregates are visible floating inside the pack Mix the pack a minimum of 20 times or until any clumps are broken up and no longer visible on the bottom of the pack, and no large aggregates are visible floating inside the pack Mix the pack a minimum of 10 times Mix the pack a minimum of 20 times; it is okay if there are still visible clumps floating inside the pack Which of the following statements about mixing a primary reagent pack is TRUE? Note: Assay dependent Question 2 of 10 Select the best answer. Multiple Choice Question Incorrect Visible clumps should not be floating inside the pack after mixing. Incorrect The primary reagent pack needs to be mixed more than 10 times. Correct Humidity packs maintain reagent compartment humidity between 70–100% Humidity packs maintain reagent compartment humidity between 70–100% The operator must manually fill the humidity packs with water prior to loading them on the system Humidity packs are loaded on the system in a humidity pack drawer Which of the following statements is TRUE regarding the humidity packs on the IM Analyzer? Question 3 of 10 Select the best answer. Multiple Choice Question Incorrect Humidity packs are loaded in the reagent drawer. Incorrect The system automatically fills the packs with water during the daily maintenance procedure. Correct To access the empty sample tip trays, unlock the Tip Tray Waste drawer in the software, open the solid waste door, and then pull open the sample tip tray waste drawer To access the empty sample tip trays, unlock the Tip Tray Waste drawer in the software, open the solid waste door, and then pull open the sample tip tray waste drawer To access the empty sample tip trays, unlock the Tip Tray Waste drawer in the software, open the solid waste door, and then pull open the sample tip tray waste drawer Sample tip trays do not need to be emptied To access the empty sample tip trays, open the solid waste door, pull the solid waste drawer out completely, and then remove the solid waste bins Which of the following statements about emptying the sample tip tray waste is TRUE? Question 4 of 10 Select the best answer. Multiple Choice Question Incorrect These are the steps to empty the solid waste including cuvettes and sample tips. Incorrect Sample tip trays waste does need to be emptied. Correct Open the sample tip loading lid Remove the protective cover from the sample tip tray bundle Install the sample tip trays Slide the tip tray bundle on to the 4 tip tray hooks Twist then pull the tab down and out to release the strap from the trays Pull the strap out to remove it from the bundle What is the proper flow of steps when replacing IM sample tips? Drag each response to place the list in the correct order. Question 5 of 10 Sequence Incorrect One or more answers are incorrect. Correct Confirm the cuvette and tip waste bins are empty by responding to the software prompt Push the drawer in and close the door Return the bins to the solid waste drawer What is the last step to perform when emptying the IM solid waste? Question 6 of 10 Select the best answer. Multiple Choice Question Incorrect Once the bins are returned to the solid waste drawer there are still two more steps to be completed. Incorrect Once the solid waste door is closed there is still one more step to be completed. Correct Vent the container by squeezing the sides of the cap and twisting counterclockwise past the first designated stop, then release the sides and twist the cap to the second designated stop Tighten the cap of the system fluid container Firmly insert the container straight down into the drawer and ensure the container is seated securely with the tabs on both sides of the container even with the drawer surface When replacing IM system fluids, what step needs to be performed to prevent a vacuum from forming inside the container? Question 7 of 10 Select the best answer. Multiple Choice Question Incorrect This step is done to ensure the container delivers fluid to the analyzer. Incorrect This step is done before the container is removed from the analyzer. Correct 7 5 6 How many humidity packs should be loaded on an Atellica® IM Analyzer initially? Question 8 of 10 Select the best answer. Multiple Choice Question Incorrect The operator loads more than 6 empty humidity packs initially. Incorrect The operator loads more than 5 empty humidity packs initially. Correct The cap on the system fluid containers should be tightened when removing the containers from the system The fluid containers can be loaded into any position in the system fluid drawer The system fluids cannot be replaced during system processing Which of the following is TRUE regarding replacing system fluids on the Atellica® IM Analyzer? Question 9 of 10 Select the best answer. Multiple Choice Question Incorrect The system fluids can be replaced during system processing because the system will use fluid from the reservoir. Incorrect The fluid containers are keyed to fit only in the designated drawer position. Correct Primary reagent packs must be manually mixed by raising each end of the pack 90◦ to its vertical position Primary reagent packs must be manually mixed by raising each end of the pack 45◦ to its vertical position Primary reagent packs must be manually mixed by raising each end of the pack 60◦ to its vertical position How should primary reagent packs be prepared before being loaded on the system? Question 10 of 10 Select the best answer. Multiple Choice Question Incorrect Primary reagent packs must be manually mixed by raising each end of the pack more than 60◦ to its vertical position Incorrect Primary reagent packs must be manually mixed by raising each end of the pack more than 45◦ to its vertical position Correct Review Review Retry Assessment Results %Results.ScorePercent%% %Results.PassPercent%% Continue YOUR SCORE: PASSING SCORE: Assessment Results You did not pass the course. Take time to review the assessment then select Retry to continue. Congratulations. You passed the course. Exit To access your Certificate of Completion, select the Launch button drop down on the course overview page. You can also access the certificate from your PEPconnect transcript. You have completed the Atellica® IM Analyzer Supply and Reagent Management Assessment. Completion Atellica IM Supply Reagent Management Assessment 1.1 Welcome 1.2 Text with Image 1.3 Disclaimer 1.4 Assessment 1.6 Multiple Choice Question 1.7 Multiple Choice Question 1.8 Multiple Choice Question 1.9 Sequence 1.10 Multiple Choice Question 1.11 Multiple Choice Question 1.12 Multiple Choice Question 1.13 Multiple Choice Question 1.14 Multiple Choice Question 1.16 Completion