Ysio - Wallstand Hand-Held Control

As you can see, the wall stand handheld control can be mounted on either side of the wall stand vertical support. The wall stand handheld control has a collimator light function where if you press the button, you can turn the collimator light on pressing the button again will turn the collimator light off. Or you can choose to have the timer turn the collimator light off. That's the recommendation is to have the timer turn the collimator light off. This helps to prolong the life of the bulb. Next we have a centering function where if you press and hold this button, it will automatically move the tube. To the wall stand at the essaidi. Depending upon which grid you have inserted into the wall stand. In this particular case, I have the 115 centimeter or 45 inch grid inserted into the wall stand. By pressing and holding the wall stand centering button, the tube moves to the correct SSID. Next we have the tracking button. Tracking is initiated when you have a wall stand. Oregon program selected and you are at the proper essaidi and you are centered to the middle of the wall stand. Grid tracking is simply moving the wall stand up and down and having the tube follow along with it. If you don't want the tube to track with the wall stand, simply turn tracking off. Now. If I move the wall stand down the tube will not follow it. Next we have the park position. If I activate the part position and the LED light comes on. Then I simply press and hold the organ program button and the tube will move automatically into the predetermined parking position. Finally, we have the organ program button at the bottom. The organ program button will move the tube to a predetermined position in the room based upon what exam or what exposure you're about to make. For example, if we have a wall chest PA Oregon program selected. Pressing and holding the organ program button will move the tube to the proper distance. From the wall stand. And will center itself to the wall stand grid and will also Orient itself for a horizontal exposure. It's very important to note to use care when moving the tube with the organ program movement function. The Patient room personnel and ancillary equipment must be taken into consideration when moving the tube in this manner, the tube does not know where room personnel or ancillary equipment such as Ivy poles and wheelchairs are located. The tube does know where the table, the wall stand, the walls, and the floor is. It does not know where anything else is in the room.

,MENS •MENS SIEMENS at ENS SIEMENS ME-NS SIEMENS SIEMENS SIEMENS SIEMENS and-Hel Wallstand Åand-He d Wal stan allst Control SN3H,• Sta pars