Ysio - Vertical Table Movement

The Ezio table has two kickplates for motorized movement, one for vertical motorized movement up. And the other one for vertical motorized movement down. There are three working Heights for the easy O table. First of all is the upper working height. And the table will stop when it reaches the working height. Next we have the middle working height and again it will stop when it reaches the middle working height and then finally we have the lowest working height. This height is typically the one you would use for getting a patient on and off the table as this height is just over 20 inches off the floor. If you want to raise the Zeo table, and it stops at the middle working height, and you wish to continue to a higher. Height simply release the kick plate, activate it again and the table will now drive up to the upper height. The table does not have to be at any particular working height in order to make exposures. Radiation can be released with the table at any working height position.

SIEMENS YSIO SIEMENS SIEMENS SIEMENS Vertical Table SIEMENS Movement SIEMENS SIEMENS SIEMENS