Ysio - Max Touch - Tracking

On the lower portion of the Max Touch or two icons which allow you to do tracking with the tube and the detector, the first icon is simply called detector tracking. When you select this icon and then move the tube longitudinally using the green arrow button, the detector tray will track with the X Ray tube. You can even angle the X Ray tube and the detector tray will track with it to stay centered. If you happen to move the tube little bit too far in the longitudinal path, eventually the detector tray will get out of range. When that happens, the icon will turn red. It's simply indicating that right now the system is not capable of tracking because it's out of range. If you move the tube longitudinally back within range, it once again becomes. Active and it will track. The second icon is simply called vertical tracking and vertical tracking means. If you raise and lower the table, the X Ray tube will track with it to maintain essaidi. So if I raise the table, the tube will raise to maintain distance. If I lower the table. The two below are to maintain the essaidi.

YSIO ouaxTouchiTra in MaxTouch Trac kin MaxTouch%, Trac in MTube/Detector and Vertical Tab e. JTube/Detector and Vertical Tab e. SIEMENS SIEMENS SIEMENS