UniPOC™ Review and Acknowledge Device Events Simulation

Continue Continue Continue Continue Continue Continue Untitled Scene Device event – an event generated by an instrument. These may be associated with the instrument, a test, or an operator Test Error Event – an alarm generated when an error event is associated with a test Instrument Error – an alarm generated by an instrument Note: Alarm counts displayed on the Dashboard reflect your selection in the Location Tree. Select the Test Error Event row. Blank unipoc_deviceevents_1.mp3 In this exercise we will demonstrate how to review and acknowledge device events using UniPOC™. A device event is generated by an instrument. These may be associated with the instrument, a test, or an operator. To begin this exercise, we will start on UniPOC’s Dashboard screen. Device events are captured under two categories on the Dashboard screen. The first device event type is captured under the LIS/Test Alarms category as a Test Error Event, which is an alarm generated when an error event is associated with a test. The second device event type is captured under the Notifications category as an Instrument Error, which is an alarm generated by an instrument. To begin, select the hyperlinked Test Error Event row. Please select the Test Error Event row to continue. Select the expand icon. Blank unipoc_deviceevents_2.mp3 The hyperlinked Test Error Event row brings us to the All Results screen, which is filtered for the unacknowledged test errors. Here you can view, edit, and acknowledge device events. To view additional device event information, select the first test record’s expand icon. Please select the expand icon to continue. Select Edit. Text Entry unipoc_deviceevents_3.mp3 Under the Alarms tab, you can view the alarms that triggered the error, and the Events tab can display additional details associated with the event. From this screen you can also view the Current Data, Audit Trail, Results, and Test Attributes information, which can be used for further investigating. Now, to modify test record information, select Edit. Please select Edit to continue. Text Entry unipoc_deviceevents_4.mp3 Here you can edit or revise test data, acknowledge or edit the event, and forward the result to the patient record. Once complete select Save to confirm your input. Additionally, from the All Results screen you can bulk acknowledge events by selecting the test records and then using the Acknowledge button. Select the Instrument Error row. Blank unipoc_deviceevents_5.mp3 Now let’s discuss the second type of device event, Instrument errors. Select the Instrument Error row. Please select the Instrument Error row to continue. Note: You can also navigate to the Events screen by selecting Review > Events in the menu. Select the expand icon. Blank unipoc_deviceevents_6.mp3 The hyperlinked Instrument Error row brings us to the filtered Events screen, which again is filtered for unacknowledged errors. To view all instrument events, you would need to update the Event Status filter. Now, let’s select the first record’s expand icon to view additional information. Please select the expand icon to continue. Blank unipoc_deviceevents_7.mp3 Here you can view summary event information and event attributes associated with the instrument event. Select Acknowledge. Blank unipoc_deviceevents_8.mp3 To acknowledge instrument errors, we can select one or more records in the Events table and then select Acknowledge. Please select Acknowledge to continue. Select Yes. Text Entry 1 unipoc_deviceevents_9.mp3 A confirmation warning message appears. Select Yes. Please select Yes to continue. Blank unipoc_deviceevents_10.mp3 The selected record or records are then marked as acknowledged in the database. Finally, to email device events, both test and instrument errors, you can select one or more records in the table, and then use the Export button found on both the Events and All Results screens. Congratulations! You have successfully reviewed and acknowledged device events. You can try the simulation again, or if you want to exit the learning activity, select Next to read the disclaimer and then close the training. Retry Next Completion Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. UniPOC and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc., or its affiliates. All other trademarks are the property of their respective owners. © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com Disclaimer Exit To access your Certificate of Completion, select the Certificates tab from the learning activity overview page. You can also access the certificate from your PEPconnect transcript. You have completed the Review and Acknowledge Device Events Simulation. Completion HOOD05162003347699 | Effective Date: 18 Jul 2023 1.1 Blank 1.2 Blank 1.3 Text Entry 1.4 Text Entry 1.5 Blank 1.6 Blank 1.7 Blank 1.8 Blank 1.9 Text Entry 1 1.10 Blank 1.11 Completion 1.12 Disclaimer 1.13 Completion