System Transport - USA

You can use the base handle, the detector handle, or the hand control to transport the system with OR speed. To transport the system with transport speed, perform the following steps. The CR must be in the zero position. Press and hold the transport position button on the panel. Unplug the system, press the transport speed button on the panel and use two hands on the base handle to drive the system with the transport speed. The system is equipped with collision detectors. The collision avoidance sensor will detect objects straight ahead and will slow down the system to OR speed. The collision detector sensors will reduce the speed of the system when a collision occurs. The collision indicator on the panel will indicate if the system detects a collision. You will have to slowly move the system out of the collision or remove the object in the path of the system.

System Transport SIEMENS 3D Healthineers Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of utility model or design, are reserved. Unrestricted | Published by Siemens Healthineers AG | Siemens Healthineers AG, 2024 Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com Health