CN-3000 and CN-6000 Systems Process Routine Samples Job Aid

CN-3000 and CN-6000 Systems SIEMENS Healthineers Process Routine Samples Job Aid Perform Routine Analysis 1. Set the sample rack with barcoded sample tubes on the right 3. Upon completion of analysis, remove the sample rack from sampler pool the left sampler pool 2. Press the Start button • Analysis progress and analysis results can be reviewed on CN-3000 the Joblist screen 008900 CCN-3000 200 0 200 0 00 1 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 CN-3000 and CN-6000 Systems SIEMENS Healthineers Process Routine Samples Job Aid Manually Register an Order 2 Details setting area 1. Press Order on the Toolbar 3 2. Enter the rack number and sample number egister order 3. Select the assay(s) to be analyzed Rack order Rack No. 00000 • Change the analysis conditions in the Details Pos. Sample No. Micro APTT Fbg PT XII Actin VWF Ac M VII Assay Num Dilution rati Meas. Time |Re-dil Re- mann setting area, if necessary 1 1234 APTT 1/1 Auto O (max:180) • Press to display the Details setting area 2 PT 1/1 Auto (max:180) O O 4. Press Register to complete registration 3 • Or press Register and go to next rack to order the 4 next sample rack, if necessary A 5. Verify the instrument status is Ready, Int. Ready or 5 Blinking 6 6. Set the sample tubes into the sample rack Comment Clear rack Clear row Repeat v 4 7. Set the sample rack into the right sampler pool 8. Press the Start button Profile Profile 2 Profile 3 Micro V Reflex 4 • Analysis progress and analysis results can be Load preset Save as preset Profile settings Register and reviewed on the Joblist screen go to next rack Register Cancel 9. Upon completion of analysis, remove the sample rack from the left sampler pool 2 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 CN-3000 and CN-6000 Systems SIEMENS Healthineers Process Routine Samples Job Aid Measurement Micro Mode Time Register order 1. Press Order on the Toolbar Rack order v Rack No.: 000002 2. Enter the rack number and sample number 3. Select the assay(s) to be analyzed Pos. Sample No. Micro APTT Fbg PT XII Actin VWF Ac M VII Assay Num Dilution rati Meas. Time Re-di Re- mann 4. Press to display the Details setting area 12345 M PT 1/1 00 360 5. Enable the micro mode setting by pressing 2 Micro 3 • An ‘M’ is displayed in the Micro column » 6. Press Register 4 A 5 6 Extend Measurement Time Comment Clear rack Clear row Repeat » 1. Press Order on the Toolbar Profile 1 Profile 2 Profile 3 V Micro Reflex 2. Enter the rack number and sample number 3. Select the assay(s) to be analyzed Load preset Save as preset Profile settings Register and go to next rack Register Cancel 4. Press to display the Details setting area 5. Press the field under the Meas. Time column Micro mode 6. Select the appropriate measurement time 7. Press Register 3 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Innovin and all related marks are trademarks of Siemens Healthineers. Any other trademarks are the property of their respective owners. Not available for sale in the U.S. Future product availability cannot be guaranteed. © Siemens Healthineers, 2021. All rights reserved. Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers 4 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021