CN-3000 and CN-6000 Systems Order Calibration Curve Confirmation QC Job Aid

CN-3000 and CN-6000 Systems SIEMENS Healthineers Order Calibration Curve Confirmation QC Job Aid Order Calibration Curve 2 3 ster order Confirmation QC Rack QC order Rack No. 000002 Select QC file no. 1. Press Order QC on the Toolbar Pos. Sample No Control Lot no Exp. date Micro AR ApiLow EdoLow IXCh H O Assa Specify vial New calib. curve 2. To run QC from the sample rack, verify QC11 CtIN 507790 2022/05/19 M PT None O Rack QC order is selected. To run QC from 2 M LA None O the reagent table, select Holder QC order 4 3. Press Select QC file no. and select the QC 3 M LA2 None O file required for analysis 4 M APTT FSL None O 4. Select the assay(s) required for analysis 5 VIII MDA 5. Select the New calib. curve checkbox in M None V the Details setting area M 5 9 6. Press Register Clear rack Clear row Load preset Save as preset Register and go to next rack Register Cancel 6 1 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Not available for sale in the U.S. Future product availability cannot be guaranteed. © Siemens Healthineers, 2021. All rights reserved. Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers 2 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021