CN-3000 and CN-6000 Systems Order and Perform QC Job Aid

CN-3000 and CN-6000 Systems SIEMENS Healthineers Order and Perform QC Job Aid Order and Perform QC from the Sample Drinkre Register order Rack 2 Rack QC order v Rack No. 000001 Select QC file no 3 Routine QC Pos Sample No. Control Lot no Exp. date Micro PT IN PT INN Cal APTT FS Fbg DD VI MDA IX MDA IXLM 1. Press Order QC on the Toolbar 1 QC25 Citrol 1 548099 17/03/2022 M V 4 2. Verify Rack QC order is selected from the order 2 QC38 Citrol 2 54829 28/04/2022 M type selection dropdown 3 M 3. Press Select QC file no. and select the required QC file 4 M 5 M Note: All QC files that have been set up in QC Settings will be shown. 6 M Clear rack Clear row 4. Select the appropriate assay(s) • If more than one QC material is required for QC 6 analysis, select the next order line and repeat Load preset Save as preset 5 Register and steps 4 and 5 go to next rack Register Cancel 5. If more than one rack for QC analysis is needed, CN-6000 Hardware check is completed. (OK) 00m 00s 11 Ready press Register and go to the next rack 6. Press Register once all controls have been ordered Note: To save the order as a preset, press Save as preset. From the Save preset dialog box, • The Joblist screen is displayed. Verify the order rename the preset (e.g. Routine QC) and press OK. In the future, users will be able to press is Pending in the Status column Load preset on the Rack QC order screen and select the renamed preset “Routine QC”. *Procedure continued on the next slide 1 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 CN-3000 and CN-6000 Systems SIEMENS Healthineers Order and Perform QC Job Aid Order and Perform QC from the Sample Rack (continued) 7. Transfer QC into 4 mL sample cup(s) 8. Set the sample cup(s) into the sample rack 9. Set the sample rack into the right sampler pool 10. Press the Start button /sysmex ....... A 2 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 CN-3000 and CN-6000 Systems SIEMENS Healthineers Order and Perform QC Job Aid Order and Perform QC from the Reagent Table Register order 1. Verify the relevant QC materials and reagents Holder QC order 3 Select QC file no. 4 have been loaded onto the reagent table Sample No. Control Lot no. Exp. date Micro PT INN PT INN Cal APTT FS 25 Fbg DD VIII MDA IX MDA KLMDA 2. Press Order QC on the Toolbar QC25 Citrol 1 548099 17/03/2022 M V 5 3. Select Holder QC order from the order type QC28 Citrol 2 548292 28/04/2022 M selection dropdown QC24 CLIP 556717 02/06/2021 M 4. Press Select QC file no. and select the required QC QC26 DDiCUI1 562252 07/07/2021 file M QC27 DDICH2 562152 07/07/2021 M Note: Only the QC files for the QC materials currently onboard the reagent table will be shown. Clear rack Clear row 5. Select the appropriate assay(s) • If more than one QC material is required for QC 6 Register Cancel analysis, select the next order line and repeat steps 4 and 5 CN-6000 D Ready 6. Press Register once all controls have been ordered • The Joblist screen is displayed. Verify the order is Pending in the Status column 7. Press the Start button 3 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Not available for sale in the U.S. Future product availability cannot be guaranteed. © Siemens Healthineers, 2021. All rights reserved. Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers 4 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021