CN-3000 and CN-6000 Systems Load Reagents and Buffers Job Aid

CN-3000 and CN-6000 Systems SIEMENS Healthineers Load Reagents and Buffers Job Aid Replace and Add Reagents 1. Prepare the reagents to be replaced or added 8. Install the reagent rack on the reagent table 2. Press Reagent/consumables on the Menu 9. Close the reagent table cover 3. Select the reagent position to be replaced/added 10. From the Read Barcode dialog box, press OK and press Replace • The barcode is read and the information on the Reagent/consumables screen is updated Eo 11. Close the operation cover CC Replace Edit Reset Volume Re-estimate Restore Aggregation CC/QC Settings 4. Verify the operation cover status display LED is solid green and open the operation cover 5. Verify the reagent table cover status display LED is solid green and open the reagent table cover 6. Lift out the reagent rack 7. Replace or add the new reagent to the reagent rack with the barcode facing out NINOSIPT 1 Effective Date: 18-Jun-2021| HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 CN-3000 and CN-6000 Systems SIEMENS Healthineers Load Reagents and Buffers Job Aid Replace and Add Buffers 1. Prepare the buffers to be replaced or added 6. Replace or add the new buffer on the buffer table 2. Press Reagent/consumables on the Menu with the barcode facing out 3. Select the buffer position to be replaced/added 7. Close the buffer table cover and press Replace 8. From the Read Barcode dialog box, press OK • The barcode is read and the information on the Eo Reagent/consumables screen is updated CC Replace Edit Reset Volume Re-estimate Restore Aggregation CC/QC Settings 9. Close the operation cover 4. Verify the operation cover status display LED is solid green and open the operation cover 5. Verify the buffer table cover status display LED is solid green and open the buffer table cover 2 Effective Date: 18-Jun-2021| HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Innovin and all related marks are trademarks of Siemens Healthineers. Any other trademarks are the property of their respective owners. Not available for sale in the U.S. Future product availability cannot be guaranteed. © Siemens Healthineers, 2021. All rights reserved. Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers 3 Effective Date: 18-Jun-2021| HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021