CN-3000 and CN-6000 Systems Discard Waste Fluids Job Aid

CN-3000 and CN-6000 Systems SIEMENS Healthineers Discard Waste Fluids Job Aid Discard Waste Fluids (If Applicable) – Daily Maintenance WASTE FLUID 1. If the instrument is on, press the Waste fluid tank icon on the Status bar to halt condensation removal • If the Waste fluid tank icon is not displayed on the Status bar, select Reagent/consumables on the Menu and locate the icon in the Consumable information area 2. Remove the float switch from the waste fluid tank 3. Discard the waste fluid per laboratory protocol 4. Verify there are no impurities in the tank • If impurities are present, wash the inside of tank and float switch with tap water 5. Attach the float switch to the rinse tank and tighten the cap 6. Verify tubing is not kinked 7. If the instrument is on, press Close on the Discard waste fluid dialog box to automatically document maintenance. If the instrument is off, document maintenance manually Note: Document manual maintenance by pressing Maintenance > Manual maint. > Register manual maintenance. Note: The waste fluid tank is optional. If the waste fluid 1 tank is not used, connect to an appropriate waste fluid Effective Date: 18-Jun-2021 | HOOD05162003199986 removal facility. Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Not available for sale in the U.S. Future product availability cannot be guaranteed. © Siemens Healthineers, 2021. All rights reserved. Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers 2 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021