CN-3000 and CN-6000 Systems Create User-Defined Maintenance Tasks Job Aid

CN-3000 and CN-6000 Systems SIEMENS Healthineers Create User-Defined Maintenance Tasks Job Aid Create User-Defined Maintenance Tasks – As Needed Maintenance 123 Eo D Menu Reagent Calib. curve QC chart Order calib. Order QC Order STAT Joblist Maintenance Shutdown Rinse probes Execute Manual maint. Comment Cycle count Funct. Test Outp Export Customize 1. Press Maintenance Edit item name 2. From the As needed maintenance section, 2021/02 Routine maintenance Delete history select a user-defined maintenance Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu F Daily/(weekly) 4.0 22 23 24 25 2 27 28 parameter to edit Rinse probes Edit item name . . . Discard used cuvettes 3. Press Customize > Edit item name Clean Racks . Discard waste fluids X Create a maintenance task by entering a Check and discard the trap chamber fluid 4. Shutdown 1 2 3 4 5 6 7 8 9 = O maintenance name Clean the instrument (weekly) Clean the rinse tank (weekly) 5. Press OK - b W e y u Monthly p no O Clean the filters Caps Lock a S d f g h k - - As-needed maintenance Shift Pressure adjustment Z X C V b n m - Prime Remove the jammed cuvettes Space OK Cancel Wipe off the piercer 1 Replace fuses of the pneumatic unit User-defined mainten User-defined maintenance 2 User-defined maintenance 3 1 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Not available for sale in the U.S. Future product availability cannot be guaranteed. © Siemens Healthineers, 2021. All rights reserved. Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers 2 Effective Date: 18-Jun-2021 | HOOD05162003199986 Unrestricted © Siemens Healthineers, 2021