CN-3000 and CN-6000 Systems Competency Checklist

Competency Checklist CN-3000 and CN-6000 Systems Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Identify and explain hardware components Navigate and explain the software Sign on and off of the system Supply and Reagent Management Monitor the status of the supply and reagent inventories Load and unload supplies, consumables, and reagents Sample Processing Process barcoded/non-barcoded patient samples Process STAT/Priority samples Monitor and review patient results Calibration Order a calibration Process and evaluate calibration results Quality Control (QC) Process a QC sample Review and validate QC results Maintenance Perform daily maintenance Perform weekly maintenance Perform monthly maintenance Perform as needed maintenance Troubleshooting Utilize the Operator Event log Identify and resolve common system errors Identify and resolve common operator errors Effective Date: 16-Jun-2021 | HILS2207 SIEMENS siemens.com/healthineers Healthineers CN-3000 and CN-6000 Systems | Competency Checklist Effective Date: 16-Jun-2021 | HILS2207 Comments Areas of Improvement Next Steps ◼ Primary Operator ◼ Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2021