syngo Dynamics VA40E Clinical Administration Delta Online Training - USA

Continue Continue Continue syngo Dynamics VA40 Clinical Administration Delta OLT ? syngo Dynamics VA40 Clinical Administration Delta Online Training This Online Training module introduces you to the new features and feature improvements available with syngo Dynamics VA40. Master Template HOOD05162003052540 | Effective Date: 26-Nov-2019 Log in 1 Reporting Enhancements 4 Image and Study Management 3 ​SysAdmin Enhancements 2 XML Interface 5 Welcome Audio text [sd_va40e_ca_01_welcome.wav] Welcome to the syngo Dynamics VA40 Clinical Administration Delta Online Training. This Online Training module introduces you to the new features and feature improvements available with syngo Dynamics VA40. Upon successful completion of this module, you will be familiar with the changes relevant for Clinical IT Administrators in syngo Dynamics VA40. Please note that this Online Training module should not be seen as a replacement to onsite application training. This training serves as a preparation to your onsite applications training. Let’s get started. ? Navigation Hints Before you start, we would like to give you a few tips on how to navigate: Table with 2 columns and 4 rows Not all pages contain audio. Some pages invite you to read for yourself or watch a video. All pages show a ? button in the lower-right corner. Select the ? button to get a quick guide through the navigation elements. Some pages show an X button in the upper right corner. Select the X button to return to the overview page and not miss any information provided. Enjoy the course! ? This slide is mandatory for all ED1 trainings. It is displayed directly after the Welcome slide. Please delete what is not needed. Navigation Hints ? Software Installation Manual The Software Installation Manual is intended to support Clinical IT Administrators when installing the following applications: Workplace Client ServiceTool Client Data Mining Application HL7 Reconciliation Tool OEM Data Import Tool Report Designer SysAdmin Performance Log Grabber Tool DICOM File Reader Software Installation Manual Audio text [sd_va40e_ca_03_software-installation-manual.wav] There is a new dedicated manual for software installation: Operator Manual – Software Installation Manual. The Software Installation Manual is intended to support Clinical IT Administrators when installing the following applications: Workplace Client ServiceTool Client Data Mining Application HL7 Reconciliation Tool OEM Data Import Tool Report Designer SysAdmin Performance Log Grabber Tool and DICOM File Reader ? Remote ServiceTool Client ServiceTools are used by service and administrative personnel to set up, configure, and manage the Vault Server products. The ServiceTool resides on the syngo Dynamics Server and can optionally be installed on a client. In VA40E, the ServiceTool comes as a standalone installer. This ServiceTool client can only be installed on the Workplace Client. Remote ServiceTool Client Audio text [sd_va40e_ca_04_remote-servicetool-client.wav] ServiceTools are used by service and administrative personnel to set up, configure, and manage the Vault Server products. The ServiceTool resides on the syngo Dynamics Server and can optionally be installed on a client. In VA40E, the ServiceTool comes as a standalone installer. This ServiceTool client can only be installed on the Workplace Client. ? Remote ServiceTool Client Installation (1/2) Please note: 32-bit version of Java Runtime Environment JRE 8u311 is required. If it is not installed, a message is displayed. In this case, please download the required version from the Oracle website. Installation: Open a browser enter the URL for the download portal, for example: http://server/sdportal/download.htm Click Install syngo Dynamics ServiceTool Client (1). Enter the server host name in the Server Name field and continue. When complete, click on the Finish button. 1 Remote ServiceTool Client Installation Audio text [sd_va40e_ca_05_rstc-installation01.wav] To install the Remote Service Tool Client: Open a browser and enter the url for the download portal. Click on Install syngo Dynamics ServiceTool Client. Enter the server host name in the Server Name field and continue. When complete, click on the Finish button. Please note: A 32-bit version of Java Runtime Environment is required to install the ServiceTool Client. If it is not installed, a message is displayed. In this case, please download the required version from the Oracle website. ? Remote ServiceTool Client Installation (2/2) Installation: When complete, a shortcut icon is created on the client desktop. After the installation, you will need to copy the certificates from the server, for example: C:\mvf\java\ssl\st_clientks_.jks C:\mvf\java\ssl\st_clienttruststore_ .jks Copy the certificates to the following directory on the client machine. “C:\programdata\Siemens\ syngoDynamics\ServiceToolClient\ssl” Remote ServiceTool Client Installation Audio text [sd_va40e_ca_06_rstc-installation02.wav] When complete, a shortcut icon is created on the client desktop. After the installation, you will need to copy the following certificates from the server to the directory on the client machine. ? Single Sign-On (SSO) Single Sign-on (SSO) is an authentication method that enables users to securely authenticate with multiple applications using one set of credentials. Single Sign-on (SSO) is supported in syngo Dynamics VA40D and higher. Click here to learn about the supported SSO providers and the requirements for SSO. Single Sign-On (SSO) Audio text [sd_va40e_ca_07_sso.wav] Single Sing-on (SSO) is an authentication method that enables users to securely authenticate with multiple applications using one set of credentials. Single Sign-on (SSO) is supported in syngo Dynamics VA40D and higher. In VA40E, there are additional enhancements to Single Sign-on. VA40E contains bug fixes to support improved serviceability and support for additional SSO ID Providers, such as Okta. SSO supports clinical users by providing one set of credentials for log in. SSO also improves Identity protection. The IT department can mandate strong authentication including multi-factor authentication. Additionally, the use of SSO results in an optimization of the maintenance efforts by reducing, for example, password resets. Table with 2 columns and 1 rows Supported SSO Identity Providers (IDP): Any Security Assertion Markup Language (SAML) 2.0 compliant ID provider, for example: ADFS, Azure, Okta, PingFederate. Requirements: SSO is supported for Active Directory users but is not supported for local syngo Dynamics user accounts. SSO is not supported in the CVIM Cerner EHR integration. SSO is not supported for the following applications: WebViewer SysAdmin Server Configuration Tool Data Mining Application Service Log Collection Utility HL7 Reconciliation Tool Patient Exclusion Tool Fax Log viewer Database API SSL Certificate Workplace Log in with Single Sign-On (SSO) Requirements ? Single Sign-On (SSO) Workflow (1/2) When SSO is configured, you can log in to syngo Dynamics Workplace or syngo Dynamics Remote Workplace using your SSO credentials. Click on the syngo Dynamics Workplace icon on your desktop. You are directed to the SSO ID provider in your facility. You are then either required to log in to your SSO, or the system tries to automatically authenticate your credentials. Single Sign-On (SSO) Workflow Audio text [sd_va40e_ca_08_sso-workflow01.wav] When SSO is configured, you can log in to syngo Dynamics Workplace or syngo Dynamics Remote Workplace using your SSO credentials directly and without the need to enter syngo Dynamics login user credentials. Click on the syngo Dynamics Workplace icon on your desktop. You are directed to the SSO ID provider in your facility. Depending on the configuration at your facility, you are then either required to log in to your SSO, or the system tries to automatically authenticate your credentials. During the authentication process the Authenticating with Single Sign-On window is displayed. ? Single Sign-On (SSO) Workflow (2/2) Once your credentials are authenticated, the syngo Dynamics Study List is displayed. If you are configured to access multiple departments, you will be automatically directed to one of your configured departments on your first log in. The next time you log in, you will be automatically directed to the last department that you selected. Single Sign-On (SSO) Workflow Audio text [sd_va40e_ca_09_sso-workflow02.wav] Once your credentials are authenticated, the syngo Dynamics Study List is displayed. If you are configured to access multiple departments, you will be automatically directed to one of your configured departments on your first log in. If required, change the department. The next time you log in, you will be automatically directed to the last department that you selected. ? Single Sign-On Combined Login Screen If Single Sign-on is not configured for all users, a ‘combined’ login screen can be configured to display. You can log in using your Single Sign-on credentials or your syngo Dynamics credentials. If Single Sign-on fails authentication, there is a button to redirect you to the combined log in screen. Click on the button to display the combined login screen. Log in using your syngo Dynamics credentials. 1 2 Single Sign-On Combined Login Screen Audio text [sd_va40e_ca_10_sso-login-screen.wav] If Single Sign-on is not configured for all users, a ‘combined’ login screen can be configured to display. You can log in using your Single Sign-on credentials or your syngo Dynamics credentials. The combined login screen is configured in the server database settings. Please contact your Siemens Healthineers Customer Care representative for support. If Single Sign-on fails authentication, there is a button on the top right of the toolbar to redirect you to the combined log in screen. Click on the button to display the combined login screen. Log in using your syngo Dynamics credentials. ? Auto Lock Out As a security enhancement, in VA40 you can configure a lock out for SysAdmin users for failed login attempts. As the System Administrator, you configure the threshold for consecutive failed login attempts within a configured timespan in the Local Security Policy. Here you configure the following settings: Account lockout threshold: number of failed login attempts. Reset account lockout counter: the time period in which the failed login attempts occur. Please consult with your facility’s Server Administration team for further information. Auto Lock Out Audio text [sd_va40e_ca_11_auto-lock-out.wav] As a security enhancement, in VA40 you can configure a lock out for SysAdmin users for failed login attempts. As the System Administrator, you configure the threshold for consecutive failed login attempts within a configured timespan in the Local Security Policy. Here you configure the following settings: Account lockout threshold. The Reset account lockout counter. Please consult with your facility’s Server Administration team for further information. ? Auto Lock Out: Example Configuration in Local Security Settings: Account threshold: set to three Reset account lockout counter: 15 minutes In this example, a user will be locked out after three consecutive failed login attempts within 15 minutes. When the login attempt threshold is exceeded, the user receives a message to contact their System Administrator. Auto Lock Out: Example Audio text [sd_va40e_ca_12_auto-lock-out-example.wav] As an example, if the Account threshold is set to three and the account lockout counter is to 15 minutes, the user will be locked out after three consecutive failed login attempts within 15 minutes. When the login attempt threshold is exceeded, the user receives a message to contact their System Administrator. ? Resolve Auto Lock Out SysAdmin User: Reset the password for the user in Users. A successful log in will reset the failed login counter and time window. Security Admin user: Please contact Siemens Healthineers Customer Care. Resolve Auto Lock Out Audio text [sd_va40e_ca_13_resolve-auto-lock-out.wav] As a system Administrator, you can reset the user’s password in the Users tab in Sys Admin. If you are a Security admin user and your account is locked out, please contact Siemens Healthineers Customer Care. ? Auto Lock Out Applications This enhancement applies to the following applications: Data Mining Application (DMA) SysAdmin Server Configuration Tool Patient Exclusion Tool Fax Log Viewer Database API Workplace HL7 Reconciliation Tool Password entry during verifying a report, marking a study as read, or marking a study as unread Service tools Auto Lock Out Applications Audio text [sd_va40e_ca_14_auto-lock-out-apps.wav] When configured, the auto lock out is applied to the following applications. Privileges In VA40, there are newly added privileges to provide users access to system functionality. These privileges should be reviewed and assigned to the appropriate groups as determined by the System Administrator. To view a list of the newly added and removed privileges, click here. ? Privileges Audio text [sd_va40e_ca_15_privileges.wav] In VA40 there are newly added privileges. These privileges should be reviewed and assigned to the appropriate groups as determined by the System Administrator. Table with 2 columns and 1 rows Newly added privileges: Addend Verified Reports Access Scheduled/Arrived Studies Access SysAdmin ‘Department’ Tab Access SysAdmin ‘License’ Tab Access SysAdmin ‘Site Ids’ Tab Access SysAdmin ‘Other Servers’ Tab Access SysAdmin ‘Users’ Tab Access SysAdmin ‘Privileges’ Tab Access SysAdmin ‘Study Types’ Tab Access SysAdmin ‘Templates’ Tab Access SysAdmin ‘Reports’ Tab Access SysAdmin ‘Fax’ Tab Access SysAdmin ‘Measurement’ Tab Access SysAdmin ‘Export’ Tab Access SysAdmin ‘Custom Export’ Tab Access SysAdmin ‘Integration’ Tab Access SysAdmin ‘Diagram Import’ Tab Access to fax log viewer Use Data Mining Use Remote Access Send Study to DICOM Node Unlock report “Physician” Relock report “Physician” Removed privileges: Cache Studies Locally Full Access Patient Jacket Read-only Patient Jacket Privileges ? Fixed License Auto Log Off A new inactivity timer is introduced for fixed licenses. Now a separate inactivity timer can be set for the clients using a floating license (1) and a fixed license (2). Per default, both settings are set to 30 minutes. The ranges are displayed next to the entries. Workplace Inactivity Time for Floating Licenses: 240 minutes maximum Workplace Inactivity Time for Fixed Licenses: 480 minutes maximum 1 2 Fixed License Auto Log Off Audio text [sd_va40e_ca_16_fixed-license.wav] A new inactivity timer is introduced for fixed licenses. Now a separate inactivity timer can be set for the clients using a floating license and a fixed license. Per default, both settings are set to 30 minutes. The ranges are displayed next to the entries. The maximum inactivity time that can be set for a floating license is 240 minutes. The maximum inactivity time that can be set for a fixed license is 480 minutes. ? SysAdmin Broadcast Message Messages can be broadcasted by the System Administrator to users from SysAdmin. The message is displayed to all logged in users irrespective of whether the user is currently using the Study List, Image Review or Reporting. Messages are displayed for the department from where the message originated only. When the user is in the enterprise study list, messages will be displayed based on the last department from which the user navigated to enterprise mode. SysAdmin Broadcast Message Audio text [sd_va40e_ca_17_broadcast-message.wav] Messages can be broadcasted by the System Administrator to users from SysAdmin. The message is displayed to all logged in users irrespective of whether the user is currently using the Study List, Image Review or Reporting. Messages are displayed for the department from where the message originated only. When the user is in the enterprise study list, messages will be displayed based on the last department from which the user navigated to enterprise mode. ? SysAdmin Broadcast Message Workflow Open SysAdmin -> License tab. Select Message (1). Type the message in the message box. Select OK (2). 1 2 SysAdmin Broadcast Message Workflow Audio text [sd_va40e_ca_18_broadcast-message-workflow.wav] To broadcast a message to users: Open SysAdmin and select the License tab. Select Message. Type the message in the message box. Select OK ? Measurements Tab It is now possible to add more than 32 measurements to the measurement set. In the Measurements tab in SysAdmin (1), click on the measurement set in the menu (2). To add additional measurements to the set, select Add Column (3). Add the desired measurements from the menu (4). If you need to reposition the measurements, you can drag and drop the measurements to the desired position. 1 2 3 4 Measurements Tab Audio text [sd_va40e_ca_19_measurement-tab.wav] It is now possible to add more than 32 measurements to the measurement set. There is no configured limit for the number of measurement sets that can be added, it has been tested with up to 200 measurements. In the Measurements tab in SysAdmin, click on the measurement set in the menu. Per default, space for 32 measurements is available. To add additional measurements to the set, select Add Column. Add the desired measurements from the menu. If you need to reposition the measurements, you can drag and drop the measurements to the desired position. ? Save Measurements Select Save to save your changes (1). If there is an empty column at the end, this column is removed when you select Save. If there is an empty column in between two columns, this column is saved when you select Save. Please note: Empty spaces in the measurement set in SysAdmin are not reflected in the Calc Palette in the user interface. 1 Save Measurements Audio text [sd_va40e_ca_20_save-measurements.wav] Select Save to save your changes (1). If there is an empty column at the end, this column is removed when you select Save. If there is an empty column in between two columns, this column is saved when you select Save. Please note: Empty spaces in the measurement set in SysAdmin are not reflected in the Calc Palette in the user interface. ? Service Log Upload Tool Service Log Upload Tool Audio text video [sd_va40e_ca_21_service-log-upload-tool.wav] – NEW VIDEO If an issue occurs with your system, you can use the Service Log Collection utility, to collect service logs and upload the logs to your server. The Service Log Collection utility is available at all syngo Dynamics Workplace clients and does not require any additional installation or setup. Whenever there are issues at the Workplace and you would like to raise service tickets, you can use this tool to collect the logs on-demand and provide them to Siemens Healthineers Customer Care. In addition to the application logs, the tool also captures a screenshot of the Windows desktop before uploading the logs to the server. To access the Service Log Collection tool, search for Service Log Capture from the Windows Start menu. Click Service Log Capture. If the utility is not able to connect to the server immediately, a message is displayed. To save the logs to your machine, click Yes. If this situation occurs, you will need to manually send the log files to Siemens Healthineers Customer Care. If required, coordinate the sending of logs with your local IT administrator. If the utility can connect to the server immediately, the Service Log Collection Utility dialog box is displayed. Enter your login name and password. Please note that the login fields are case sensitive. Select your department and server from the Department drop-down list and click Login. After successful log in, a message is displayed, explaining that the collection of logs involves Protected Health Information (PHI). Read the message and select Accept. You can cancel the process by selecting Cancel. As the logs are being collected, a message is displayed. If you close this message by pressing the cross in the top right corner, the collection process will be aborted. When the logs are successfully sent to the server, a confirmation message is displayed. The confirmation message includes the name of the server where the logs are stored. This is the server that you selected during log in. Select Close to close the message. If there are any problems with the collection and upload of the logs, an error message is displayed. If there was a problem with connecting to the server, the message describes the location where the log files are saved on your client system. In this case, you will need to manually send the log files to Siemens Healthineers Customer Care. If required, coordinate the sending of logs with your local IT administrator. If there was a failure to collect the logs a message is displayed. In this case, repeat the log capture process. If the problem persists, contact Siemens Healthineers Customer Care. ? Export Study List In VA40 it is possible to export the Study List as a .csv file. Select Save Study List To File from the Study menu (1). A message is displayed (2). Browse to the location on the computer where you would like to store the file. When complete, a success message is displayed, listing the directory (3). The .csv file can be opened in Excel. 1 2 3 Export Study List Audio text [sd_va40e_wp_15_export-sl.wav] In VA40 it is possible to export the Study List as a csv file. Select Save Study List To File from the Study menu. A message is displayed, informing you that you should save the information on encrypted media (PHI information). Browse to the location on the computer where you would like to store the file. When complete, a success message is displayed, listing the directory . The csv file can be opened in excel. The csv file contains all studies available as part of the filter criteria. ? Monitor Switching In VA40 syngo Dynamics allows you to switch from a dual monitor to a single monitor display and extend the display from single monitor to dual monitor display. Monitor switching is supported in Image Review when two monitors are configured, and the resolution of both configured monitors are the same. Monitor Switching Audio text [sd_va40e_wp_30_monitor-switching.wav] In VA40 syngo Dynamics allows you to switch from a dual monitor to a single monitor display and extend the display from single monitor to dual monitor display. Monitor switching is supported in Image Review when two monitors are configured, and the resolution of both configured monitors are the same. Please note that monitor switching is not supported from the Study list, when only a single monitor set up is available on the client, or with dual monitors with two different resolutions, and when a third-party application is launched, for example, syngo.via ? Monitor Switching Workflow To change the display from dual to single monitor display: Click on the menu icon in the title bar. Select Single Monitor. To change the display from single to dual monitor display: Click on the menu icon in the title bar. Select Dual Monitor. The monitor switching configuration is not retained by the application and is reset when the application is closed. Monitor Switching Workflow Audio text [sd_va40e_wp_31_monitor-switching-workflow.wav] To change the display from dual to single monitor display: Click on the menu icon in the title bar. Select Single Monitor. To change the display from single to dual monitor display: Click on the menu icon in the title bar. Select Dual Monitor. It is important to note that when working with prior studies, only one prior study can be opened in a single monitor display. This means that if two prior studies are open in a dual monitor display, the most recently opened prior study is closed when switching to a single monitor display. When you select dual monitor display again, you will need to reopen the previously closed prior study. The monitor switching configuration is not retained by the application and is reset when the application is closed. ? Display Configuration (1/2) In VA40, you can configure the monitors to launch and run from the syngo Dynamics application. You configure the monitor display using the Display Configuration dialog. To open the Display Configuration dialog: Select the menu icon in the title bar (1) and select Display Configuration (2). The Display Configuration dialog is opened (3). 1 2 3 Display Configuration Audio text [sd_va40e_ca_25_display-configuration01.wav] In VA40, you can configure the monitors to launch and run from the syngo Dynamics application. You configure the monitor display using the Display Configuration dialog. To open the Display Configuration dialog: Select the menu icon in the title bar and select Display Configuration. The Display Configuration dialog is opened. ? Display Configuration (2/2) To configure the Primary monitor: Click on the monitor which you want to configure as the primary monitor. The selected monitor layout will be highlighted as the primary monitor. To remove the selection, click on the monitor again. Next click on the monitor that you would like to configure as the secondary monitor. Click on Save to save your changes. Display Configuration Audio text [sd_va40e_ca_26_display-configuration02.wav] To configure the Primary monitor, click on the monitor which you want to configure as the primary monitor. The selected monitor layout will be highlighted as the primary monitor. To remove the selection, click on the monitor again. Next click on the monitor that you would like to configure as the secondary monitor. Click on Save to save your changes. You must log out and log back into syngo Dynamics for your changes to take effect. ? Display Configuration: Share with syngo.via If syngo.via is integrated with syngo Dynamics, you can configure the secondary monitor to share with syngo.via. Right click on the monitor to be shared with syngo.via. A message is displayed indicating that the monitor is shared with syngo.via. Please note: To share the secondary monitor with syngo.via, the syngo.via client must be configured as single monitor, displayed on the secondary monitor. Display Configuration: Share with syngo.via Audio text [sd_va40e_ca_27_display-configuration-share.wav] If syngo.via is integrated with syngo Dynamics, you can configure the secondary monitor to share with syngo.via. Right click on the monitor to be shared with syngo.via. A message is displayed indicating that the monitor is shared with syngo.via. Please note: To share the secondary monitor with syngo.via, the syngo.via client must be configured as single monitor, displayed on the secondary monitor. ? Send Images to DICOM Nodes If you have the privilege assigned, you can send studies to multiple configured DICOM nodes (servers). Select one or more studies in the Study List. Studies must reside on the same server. Select Study > Send Studies to DICOM Nodes (1). Select the DICOM node or nodes to which you want to send the selected studies (2). Click Send. 1 3 2 Send Images to DICOM Nodes Audio text [sd_va40e_ca_28_send-images.wav] If you have the privilege assigned, you can send studies to multiple configured DICOM nodes. DICOM Nodes are configured in the Service Tools- Network Manager. Select one or more studies in the Study List. Studies must reside on the same server. Select Study > Send Studies to DICOM Nodes. Select the DICOM node or nodes to which you want to send the selected studies. You can search for the DICOM node by typing a few letters in the Search box. Click Send. ? Send Study to DICOM Node A new privilege, Send Study to DICOM Node, has been added. This privilege enables users to send syngo Dynamics studies to configured DICOM nodes (servers) from the Workplace. Send Study to DICOM Node Audio text [sd_va40e_ca_29_send-study.wav] A new privilege, Send Study to DICOM Node, has been added. This privilege enables users to send syngo Dynamics studies to configured DICOM nodes from the Workplace ? HL7 Study Reconciliation Tool In VA40, the HL7 Study Reconciliation Tool is integrated within the Study List. You can open the HL7 Reconciliation Tool from the Utilities menu. This enables you to manually associate the study with an order when a new order was placed in place of the canceled order. Please note: This feature is a licensed feature and may not be available on your system. HL7 Study Reconciliation Tool Audio text [sd_va40e_ca_30_hl7-study-tool.wav] In VA40, the HL7 Study Reconciliation Tool is integrated within the Study List. You can open the HL7 Reconciliation Tool from the Study List by selecting the HL7 Study Reconciliation Tool from the Utilities menu. All studies with canceled orders are displayed in the Order Association tab in the HL7 Reconciliation tool. This enables you to manually associate the study with an order when a new order was placed in place of the canceled order. Please note that this feature is a licensed feature and may not be available on your system. ? HL7 Study Reconciliation: Break Reconciliation If a demographic reconciliation was done in error, you can break the reconciliation. Select the study from the Study List that has been reconciled. From the Patient Menu select: Break Reconciliation. On success of the operation, you are notified with the message: “The Break Reconciliation command has completed successfully.” HL7 Study Reconciliation: Break Reconciliation Audio text [sd_va40e_ca_31_hl7-study-tool-break-recon.wav] If a demographic reconciliation was done in error, you can break the reconciliation. Select the study from the Study List that has been reconciled. Do not select more than one study. If you select more than one study, the Break Reconciliation option is disabled in the menu. From the Patient Menu select: Break Reconciliation. On success of the operation, you are notified with the message: “The Break Reconciliation command has completed successfully” ? HL7 Study Reconciliation: Break Order Association If a study is associated incorrectly with an order, you can remove or break that association. Select the study from the Study List that has the order association. From the Patient Menu select: Break Order Association. On success of the operation, you are notified with the message: “The Break Order Association command has completed successfully.” HL7 Study Reconciliation: Break Order Association Audio text [sd_va40e_ca_32_hl7-study-tool-break-order.wav] If a study is associated incorrectly with an order, you can remove or break that association. Select the study from the Study List that has the order association. From the Patient Menu select: Break Order Association. On success of the operation, you are notified with the message: “The Break Order Association command has completed successfully”. ? Soft Template Check-in With VA40 you can check in templates without forcing users to log off. When you check in the templates, users that are currently logged in receive a message notifying them that new templates are available. Users can continue to review images, perform measurements and complete reports. The template can be updated as required, inline with their current workflow. The following slides demonstrate how to update the template depending on your current workflow status. Soft Template Check-in Audio text [sd_va40e_ca_33_stc.wav] With VA40 you can check in templates without forcing users to log off. When you check in the templates, users that are currently logged in receive a message notifying them that new templates are available. Users can continue to review images, perform measurements and complete reports. The template can be updated as required, inline with their current workflow. The following slides demonstrate how to update the template depending on your current workflow status. ? When a new study is opened, the updated report and worksheet templates are applied. Soft Template Check-in: Open at Study List Open at Study List Audio text video [sd_va40_sysadmin_stc_01_open-study_v2.wav] If there is no previous report for a study, the worksheet and report templates update when you open the study. Select the study from the study list. When you open the report and worksheet the templates are updated to the new templates. ? Study Open in Image Review Select the numbered steps below to learn about updating the template if you have the study open in Image Review when the check-in occurs. 1 1 1 2 2 2 3 3 3 Study Open in Image Review Audio text [sd_va40e_ca_35_study-open-image-review.wav] Select the numbered steps below to learn about updating the template if you have the study open in image review when the check-in occurs. Audio text video [sd_va40_sysadmin_stc_02_template-dialog.wav] If you have the study open when template check-in occurs, a template dialog is displayed. Accept the message. You can continue to work uninterrupted. If you would like to use the updated templates, you can update them at a later time as your workflow allows. Audio text [sd_va40e_ca_35_open-report-worksheet.wav] When you open the report and/or worksheet, the updated Worksheet is displayed, and the outdated Report is displayed. A message is shown to notify you that the templates have been updated. Templates are locked and are not editable. The study must be closed and reopened in order to edit templates. Audio text video [sd_va40_sysadmin_stc_03_close-reopen_v2.wav] If you would like to update the template for a study that was opened during the check-in, you must close and open the study. Closing and re-opening the study, updates the worksheet and the updated definitions in the Calc palette. The report template is not automatically updated. To update the report template to the new template, you must replace the report. Select Replace Report from the menu in the bottom left corner. Select the report that you would like to use as a replacement. A dialog appears. Select Change. The report template is updated to the selected template. Close/reopen the study When you close and re-open the study: The worksheet is updated. The definitions in the Calc Palette are updated. To update the report, you must replace the report. 3 When you open the report and/or worksheet, the updated Worksheet is displayed and the outdated Report is displayed. A message is shown to notify you that the templates have been updated (1). Templates are locked and are not editable. The study must be closed and reopened in order to edit templates. Open the Report/Worksheet 2 1 The template dialog box is displayed You can continue to review images, perform measurements and complete your report. 1 ? Study Open in Image Review and Reporting Select the numbered steps below to learn about updating the template if you have the study open in Image Review and Reporting when the check-in occurs. 1 1 1 2 2 2 3 3 3 Study Open in Image Review and Reporting Audio text [sd_va40e_ca_36_01-study-open.wav] Select the numbered steps below to learn about updating the template if you have the study open in image review and reporting when the check-in occurs. Audio text [sd_va40e_ca_36_02-template-dialog.wav] If the study was opened in Image Review and Reporting when the template check-in occurred: The template check-in dialog is displayed. Accept the message. Audio text [sd_va40e_ca_36_03-new-template.wav] Continue to work on the original or new templates. No message is shown below the worksheet and report. If desired, you can continue to work on the original worksheet template and report. If you would like to use the new templates, you must close and re-open the study and replace the report. Audio text video [sd_va40_sysadmin_stc_03_close-reopen_v2.wav] If you would like to update the template for a study that was opened during the check-in, you must close and open the study. Closing and re-opening the study, updates the worksheet and the updated definitions in the Calc palette. The report template is not automatically updated. To update the report template to the new template, you must replace the report. Select Replace Report from the menu in the bottom left corner. Select the report that you would like to use as a replacement. A dialog appears. Select Change. The report template is updated to the selected template. 3 Close/reopen the study When you close and re-open the study: The worksheet is updated. The definitions in the Calc Palette are updated. To update the report, you must replace the report. Continue to work on the original or new templates No message is shown below the worksheet and report. If desired, you can continue to work on the original worksheet template and report. If you would like to use the new templates, you must close and re-open the study and replace the report. 2 The template dialog box is displayed If the study was opened in Image Review and Reporting when the template check-in occurred: The template check-in dialog is displayed. Accept the message. 1 ? Unlocking & Locking Report With the required privilege, you can unlock the report, by right clicking on the icon to the right of the Report Type. If the study is set to Read & Locked, the system will automatically mark the study as Unread when the report is manually unlocked. When you relock the report, the system will also mark the study as Read based on the SysAdmin configuration. After the report is relocked and the study is marked as Read, you must manually upload the modified report. Unlocking & Locking Report Audio text [sd_va40e_ca_37_unlocking-locking-report.wav] With the required privilege, you can unlock the report, by right clicking on the icon to the right of the Report Type. If the study is set to Read & Locked, the system will automatically mark the study as Unread when the report is manually unlocked. When you relock the report, the system will also mark the study as Read based on the SysAdmin configuration. After the report is relocked and the study is marked as Read, you must manually upload the modified report. This only applies if you use the upload reports functionality, that is HL7, Open link or MLA to your EMR. Please note: You must have the relevant privileges assigned in SysAdmin to unlock & relock the report. ? Unlocking & Locking Report: Privileges To Unlock and Relock a report, the user must have the following privileges assigned in SysAdmin: Unlock report “Physician” Relock report “Physician” Unlocking & Locking Report: Privileges Audio text [sd_va40e_ca_38_unlocking-locking-report-privileges.wav] To Unlock and Relock a report, the user must have the following privileges assigned in SysAdmin: Unlock report “Physician” Relock report “Physician” ? ECG Data Import Electrocardiogram (ECG) data can be imported from supported ECG systems, for display in Worksheet and Report templates. Supported ECG Systems: Hillrom XscribeTM GE MuseTM ECG data import is not supported in studies that import Hemodynamic or EP data. ECG Data Import Audio text [sd_va40e_ca_39_ecg-data-import.wav] In VA40E and higher, Electrocardiogram (ECG) data can be imported from supported ECG systems, for display in Worksheet and Report templates. Please note, this feature requires a license and may not be available on your system. ECG data can be imported for the following supported ECG Systems: Hillrom Xscribe and GE Muse. Data import is supported from one system per study, this means that ECG data import is not supported in studies that import Hemodynamic or EP data. ? ECG Data Import Configuration ECG data import is only possible if: The Import Data license is available in the License tab in SysAdmin (1). The Study Type in the Study Types tab in SysAdmin is configured to import ECG data (2). The third-party application data files can be configured to be deleted after the specified days in the syngo Dynamics Server Configuration Tool (3). 1 2 3 ECG Data Import Configuration Audio text [sd_va40e_ca_40_ecg-data-import-config.wav] ECG data import is only possible if : The Import Data license is available in the License tab in SysAdmin. and the Study Type in the Study Types tab in SysAdmin is configured to import ECG data. The third-party application data files can be configured to be deleted after the specified days in the syngo Dynamics Server Configuration Tool. ? Import FHIR Server Data into syngo Dynamics The import of data from the FHIR server to syngo Dynamics is supported for the fields: Patient Height Patient Weight Blood Pressure If the Patient ID and Assigning Authority for the study match, the fields are automatically imported for the study when you open the study for the first time. You can also manually import the data from the FHIR server. You configure the FHIR interface in the Server Configuration Tool. Import FHIR Server Data into syngo Dynamics Audio text [sd_va40e_ca_41_import-fhir-server-data.wav] In VA40E and higher, the import of data from the FHIR server to syngo Dynamics is supported for the fields: Patient Height Patient Weight and Blood Pressure If the Patient ID and Assigning Authority for the study match with the data from the FHIR server, the fields are automatically imported for the study when you open the study for the first time. You can also manually import the data from the FHIR server. You configure the FHIR interface in the Server Configuration Tool. Please speak with your Siemens Healthineers Customer Care representative for more information regarding configuration of the FHIR server. ? Fax Reports When a user uses the syngo Dynamics Workplace to send a fax (Send to -> Fax to in Reporting), syngo Dynamics creates fax files which can be used by third-party fax applications to send faxes outside of the hospital network. The fax files are created in the F:\Acuson\FaxQueue folder on the Server. Any third-party fax application at site should be configured appropriately to take the information from these files and send the fax to the required recipients. For each fax sent, the three different files are created. .faxjob .PDF .TXT On the server, this file is created in the folder: F:\Acuson\FaxQueue On the server, this file is created in the folder: F:\Acuson\FaxQueue\DS3000Services On the server, this file is created in the folder: F:\Acuson\FaxQueue\DS3000Services Fax Reports Audio text [sd_va40e_ca_42_fax-reports.wav] In VA40E and higher, when a user uses the syngo Dynamics Workplace to send a fax via selection of Send to and then Fax to in Reporting, syngo Dynamics creates fax files which can be used by third-party fax applications to send faxes outside of the hospital network. The fax files are created in a folder on the Server. Any third-party fax application at site should be configured appropriately to take the information from these files and send the fax to the required recipients. For each fax sent, the three different files are created. ? syngo Dynamics XML Interface In VA40, an interface between syngo Dynamics and the Electronic Medical Records (EMR) system can be configured to enable connectivity of the EMR and syngo Dynamics. Two provided workflows: EMR Driven Workflow. syngo Dynamics Driven Workflow. One of the applications (PACS or EMR) drops an XML file in a directory that is accessible by both applications. The second application continuously monitors this shared directory for any new XML files. The second application reads the contents of each file, deletes the file, and takes corresponding action. syngo Dynamics XML Interface Audio text [sd_va40e_ca_43_xml-interface.wav] In VA40C and higher, an interface between syngo Dynamics and the Electronic Medical Records (EMR) system can be configured to enable connectivity of the EMR and syngo Dynamics. There are two provided workflows: The EMR Driven Workflow or the syngo Dynamics Driven Workflow. ? EMR Driven Workflow The EMR Driven Workflow enables users to log in, log out, open, and close studies in syngo Dynamics when the user performs the same events in the EMR. EMR System syngo Dynamics User logs in User opens study User closes study User logs out Launch and login syngo Dynamics syngo Dynamics opens study syngo Dynamics closes study Logout syngo Dynamics EMR Driven Workflow Audio text [sd_va40e_ca_44_emr-driven-workflow.wav] The EMR Driven Workflow enables users to log in, log out, open, and close studies in syngo Dynamics when the user performs the same events in the EMR. ? syngo Dynamics Driven Workflow The syngo Dynamics Driven Workflow enables users to log in, log out, open, and close studies in the EMR application when the user performs the same events in syngo Dynamics. syngo Dynamics EMR System User logs in User opens study User closes study User logs out Launch and login EMR EMR opens study EMR closes study Logout EMR syngo Dynamics Driven Workflow Audio text [sd_va40e_ca_45_sd-driven-workflow.wav] The syngo Dynamics Driven Workflow enables users to log in, log out, open, and close studies in the EMR application when the user performs the same events in syngo Dynamics. EMR Driven Workflow: View Parameters It can be configured to automatically open the study in a particular view in syngo Dynamics, based on the search criteria in the EMR. The supported study views are: Images Report Worksheet Report & Worksheet Images [Default] Report Worksheet Report & Worksheet Images only Report and Images Worksheet and Images Report and Worksheet Study Open XML Event View Parameter Study Layout ? EMR Driven Workflow: View Parameters Audio text [sd_va40e_ca_46_emr-driven-workflow-view-params.wav] It can be configured to automatically open the study in a particular view in syngo Dynamics, based on the search criteria in the EMR. The supported study views are: Images Report Worksheet Report & Worksheet For example, if you search for a patient in the EMR and the view parameter Worksheet has been defined, the study opens with the Worksheet automatically opened. ? EMR Driven Workflow: Study List If there is more than one potential study match for the search criteria entered in the EMR, syngo Dynamics displays the Study List with the list of potential matches. The Study List is limited to the search criteria entered in the EMR. Select the required study from the Study List. To return to the Study List, click on the Return to Study List icon in the tool bar in Image Review. EMR Driven Workflow: Study List Audio text [sd_va40e_ca_47_emr-driven-workflow-study-list.wav] If there is more than one potential study match for the search criteria entered in the EMR, syngo Dynamics displays the Study List with the list of potential matches. The Study List is limited to the search criteria entered in the EMR. Select the required study from the Study List. To return to the Study List, click on the Return to Study List icon in the tool bar in Image Review. The Study List displays the previous search query results. ? EMR Driven Workflow: Site ID If the Site ID parameter is provided in the XML, syngo Dynamics will use the Site ID, in addition to other search criteria, to search for the study in the EMR driven workflow. If the search criteria (including the Site ID) are a direct match to a study in syngo Dynamics, the study opens automatically in syngo Dynamics. If the search criteria (including the Site ID) are not a direct match to a study in syngo Dynamics, an error message is displayed. EMR Driven Workflow: Site ID Audio text [sd_va40e_ca_48_site-id.wav] If the Site ID parameter is provided in the XML, syngo Dynamics will use the Site ID, in addition to other search criteria, to search for the study in the EMR driven workflow. If the search criteria (including the Site ID) are a direct match to a study in syngo Dynamics, the study opens automatically in syngo Dynamics. If the search criteria (including the Site ID) are not a direct match to a study in syngo Dynamics, an error message is displayed. ? Encryption For both the EMR driven and the PACS driven workflows the following encryption types are supported: AES 128 encryption. AES 256 encryption. You configure the encryption type in the Server Configuration Tool. Encryption Audio text [sd_va40e_ca_49_encryption.wav] For both the EMR driven and the PACS driven workflows the following encryption types are supported: AES 128 encryption. and AES 256 encryption. You configure the encryption type in the Server Configuration Tool. ? Course Review Congratulations. You have completed the syngo Dynamics VA40 Clinical Administration Delta Online Training. Select the numbered buttons below to review the material before proceeding to the final assessment. XML Interface Reporting Enhancements SysAdmin Enhancements Log In 1 1 2 2 2 4 4 5 5 Image and Study Management 3 3 3 Course Review XML Interface It can be configured to automatically open the study in in a particular view in syngo Dynamics, based on the search criteria in the EMR. If the Site ID parameter is provided in the XML, syngo Dynamics will use the Site ID, in addition to other search criteria, to search for the study in the EMR driven workflow. For both the EMR driven and the PACS driven workflows the following encryption types are supported: AES 128 encryption and AES 256 encryption. 1 1 2 2 2 Select the X button to return to the overview page. XML Interface In VA40C and higher, an interface between syngo Dynamics and the Electronic Medical Records (EMR) system can be configured to enable connectivity of the EMR and syngo Dynamics. There are two provided workflows: The EMR Driven Workflow enables users to log in, log out, open, and close studies in syngo Dynamics when the user performs the same events in the EMR. The syngo Dynamics Driven Workflow enables users to log in, log out, open, and close studies in the EMR application when the user performs the same events in syngo Dynamics. 1 1 2 2 1 Select step 2 to continue. Reporting Enhancements After the report is relocked and the study is marked as Read, you must manually upload the modified report. To unlock and relock a report the user must have the privilege assigned in SysAdmin: Unlock report “Physician”, Relock report “Physician”. In VA40E and higher data can be imported from the ECG systems, Hillrom Xscribe and GE Muse. The ECG data import is possible only if the Import Data license is available and Import Data is configured for the Study Type in SysAdmin. In VA40E and higher, the import of data from the FHIR server to syngo Dynamics is supported for the fields: Patient Height, Patient Weight and Blood Pressure. 1 1 2 2 2 Select the X button to return to the overview page. Reporting Enhancements With Soft Template Check-In enhancement, templates may be checked in even if users are logged in and studies are open. A message appears notifying them that new templates are available. Users can continue to review images, perform measurements and complete reports. The template can be updated as required, inline with their current workflow. With the required privilege, you can unlock the report, by right clicking on the icon to the right of the Report Type. If the study is set to Read & Locked, the system will automatically mark the study as Unread when the report is manually unlocked. When you relock the report, the system will also mark the study as Read based on SysAdmin configuration. 1 1 2 2 1 Select step 2 to continue. Image and Study Management In VA40, the HL7 Study Reconciliation Tool is integrated within the Study List. You can open the HL7 Reconciliation Tool from Study List, Utilities menu. If a demographic reconciliation was done in error, you can break the reconciliation. Select the study from the Study List and select Break Reconciliation from the Patient Menu. If a study is associated incorrectly with an order, you can remove or break that association. Select the study from the Study List and select Break Order Association from the Patient menu. 1 1 2 2 2 Select the X button to return to the overview page. Image and Study Management If an issue occurs with your system, you can use the Service Log Collection Utility, to collect service logs and upload the logs to your server.   To access the Service Log Collection tool, search for Service Log Capture from the Windows Start menu. Click Service Log Capture. In VA40 syngo Dynamics allows you to switch from a dual monitor to a single monitor display and from single monitor to dual monitor display. To change the monitor display, click on the menu icon in the title bar and select Single or Dual Monitor. In VA40, you can configure the monitors to launch and run from the syngo Dynamics application. Select the menu icon in the title bar and select Display Configuration.  1 1 2 2 1 Select step 2 to continue. SysAdmin Enhancements A message can be broadcasted from SysAdmin to users. The message is displayed to all users currently logged in to the department from which the message was broadcasted. In the License tab in SysAdmin, select Message. Type your message and select OK. 1 1 2 2 2 Select the X button to return to the overview page. SysAdmin Enhancements In VA40, there are newly added privileges to provide users access to system functionality. These privileges should be reviewed and assigned to the appropriate groups as determined by the System Administrator. A new inactivity timer is introduced for fixed licenses. Now a separate inactivity timer can be set for the clients using a floating license and a fixed license. The ranges are displayed next to the entries. Workplace Inactivity Time for Floating Licenses: 240 minutes maximum. Workplace Inactivity Time for Fixed Licenses: 480 minutes maximum. 1 1 2 2 1 Select step 2 to continue. Log In 1 1 2 2 2 If Single Sign-on fails authentication, there is a button to redirect you to the combined log in screen. Users will be automatically locked out if they have exceeded the configured “account threshold” for login attempts within the configured time span of “reset account lockout counter”. As the System Administrator, you configure the threshold for consecutive failed login attempts within a configured timespan in the Local Security Policy. Here you configure the following settings: Account lockout threshold: number of failed login attempts. Reset account lockout counter: the time period in which the failed login attempts occur. Select the X button to return to the overview page. Log In Single Sign-on (SSO) is an authentication method that enables users to securely authenticate with multiple applications using one set of credentials. Single Sign-on (SSO) is supported in syngo Dynamics VA40D and higher for any Security Assertion Markup Language (SAML) 2.0 compliant SSO Identity providers (IDP). SSO is supported for Active Directory users but is not supported for local syngo Dynamics user accounts. When SSO is configured, you can log in to the syngo Dynamics Workplace or the syngo Dynamics Remote Workplace using your SSO credentials. If Single Sign-on is not configured for all users, a ‘combined’ login screen can be configured to display. 1 1 2 2 1 Select step 2 to continue. Disclaimer ? Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2022 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com Disclaimer Assessment Welcome to the assessment. For each question, select your answer and then select Submit. You will have 3 attempts to take this assessment and to successfully pass this course. You must receive a score of 80% or higher. You will receive your score when you have completed the assessment. Start Assessment No. All users in the department must be configured as SSO users. No. SSO is not supported for syngo Dynamics. Yes. syngo Dynamics always displays a combined log in screen for both users to log in with either their SSO or syngo Dynamics credentials. Yes. It can be configured to display a combined log in screen for users to log in with either their SSO or syngo Dynamics credentials. ? In VA40D and higher, Single Sign-on (SSO) is supported. If SSO is not configured for all users in your department, can your department configure SSO for syngo Dynamics? Question 1 of 5 Select the best answer. Question 1 Log in to SysAdmin and reset the account password. Create a new User account for the locked user. Ask the user to wait 15 minutes and try to log in again. Contact your Siemens Healthineers Service Representative. ? How do you resolve an Auto Lock out for a general (non Admin) account? Question 2 of 5 Select the best answer. Question 2 Fixed licenses only. Floating licenses only. Fixed or floating licenses. No automatic log out can be configured for inactive accounts. ? An automatic log out can be configured for inactive accounts. Which license type does this apply to? Question 3 of 5 Select the best answer. Question 3 SysAdmin. The Service Configuration Tool. The Windows Start menu on the Client. ? Where do you access the Log Capture Tool? Question 4 of 5 Select the best answer. The Windows Start menu on the Server. The Windows Start menu on the Server. The Windows Start menu on the Server. Question 4 No action is required, the report is automatically updated. Open and close the study. Open and close the study and replace the report. ? If you have the study open during template check-in, what do you do to access the new report? Question 5 of 5 Select the best answer. Question 5 Retry Assessment Results %Results.ScorePercent%% %Results.PassPercent%% Continue YOUR SCORE: PASSING SCORE: Assessment Results You have exceeded your number of assessment attempts. Exit You did not pass the course. Select Retry to continue. Congratulations. You passed the course. ? Exit To access your Certificate of Completion, select the Launch button drop down on the course overview page. You can also access the certificate from your PEPconnect transcript. You have completed the syngo Dynamics VA40 Clinical Administration Delta Online Training. Completion Navigation Help Select the icon above to open the table of contents. Click Next to continue. Next Welcome Slide The timeline displays the slide progression. Slide the orange bar backwards to rewind the timeline. Click Next to continue. Next Tmeline Select the X to close the pop-up. Click Next to continue. Next Layer Slide Some images may have a magnifier icon. Select the image to see an enlarged view. Select it again to return to the normal view. Click Next to continue. Next Zoom Slide Some images have a magnifier icon in the bottom-left corner. Select these image to see an enlarged view of the image. Select the image again to return to the normal view. Select Submit to record your response. Click the X in the upper right corner to exit the navigation help. Assessment Slide US_sDVA40E Clinical Admin OLT 1.1 Welcome 1.2 Navigation Hints 1.3 Software Installation Manual 1.4 Remote ServiceTool Client 1.5 Remote ServiceTool Client Installation Log In 1.7 Single Sign-On (SSO) 1.8 Single Sign-On (SSO) Workflow 1.10 Single Sign-On Combined Login Screen 1.11 Auto Lock Out 1.12 Auto Lock Out: Example 1.13 Resolve Auto Lock Out 1.14 Auto Lock Out Applications 1.15 Privileges 1.16 Fixed License Auto Log Off 1.17 SysAdmin Broadcast Message 1.18 SysAdmin Broadcast Message Workflow 1.19 Measurements Tab 1.20 Save Measurements 1.21 Service Log Upload Tool 1.22 Export Study List 1.23 Monitor Switching 1.24 Monitor Switching Workflow 1.25 Display Configuration 1.27 Display Configuration: Share with syngo.via 1.28 Send Images to DICOM Nodes 1.29 Send Study to DICOM Node 1.30 HL7 Study Reconciliation Tool 1.31 HL7 Study Reconciliation: Break Reconciliation 1.32 HL7 Study Reconciliation: Break Order Association 1.33 Soft Template Check-in 1.34 Open at Study List 1.35 Study Open in Image Review 1.36 Study Open in Image Review and Reporting 1.37 Unlocking & Locking Report 1.38 Unlocking & Locking Report: Privileges 1.39 ECG Data Import 1.40 ECG Data Import Configuration 1.41 Import FHIR Server Data into syngo Dynamics 1.42 Fax Reports 1.43 syngo Dynamics XML Interface 1.44 EMR Driven Workflow 1.45 syngo Dynamics Driven Workflow 1.46 EMR Driven Workflow: View Parameters 1.47 EMR Driven Workflow: Study List 1.48 EMR Driven Workflow: Site ID 1.49 Encryption 1.50 Course Review 1.51 Disclaimer 1.52 Assessment