Startup and Shutdown - USA

To start up the system, plug in the cable to connect the monitor trolley with the C arm. Then press the power button on the monitor trolley. The system will boot up. Once it is fully booted you will see the main screen. If you do not want to boot up both together, it is also possible to move the C arm without the monitor trolley. To do so, press the on off button on the base handle panel. You can move the system without the monitor trolley. Without a connected monitor trolley, not all functions are available. To shut down the system, close the current patient on the control panel. Press the off button on the monitor trolley. Unplug the C arm. The C arm system remains on, powered by its battery. To switch it off, press the on off button on the base handle for more than 5 seconds. After 10 minutes without movement, the unconnected C arm will go into power saving mode.

90 Startup and Shutdown 3D SIEMENS Healthineers Heal Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of utility model or design, are reserved. Unrestricted I Published by Siemens Healthineers AG | C Siemens Healthineers AG, 2024 Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com