Splitting images into a new series (VExx)

Splitting images into a new Series (VEXX) job aid Angiography – Application software VExx An additional job aid is available on PEPconnect to determine the software version of the system. In the Patient Browser, you can split the series by selecting instances of the series and creating a new series containing selected instances. Splitting images into a new series can be helpful when resending a series to PACS. Some PACS systems may reject the series, even after renaming it, because they treat it as duplicates. Split- ting the series creates a new entry in the browser, starting with a 900 number, which helps avoid this issue. 1. Locate the selected series on the patient browser to resend to PACS. 2. Single click on the desired series level. 3. Click on the series number under the instance level. a) If the Instance level is on preview or icon view, change it to list view from the drop- down menu. Instances Instance Num Acquisition Date and Time Image Comments Image Type N + 12/13/2018 10:08:17 AM Original, Prim ... 4. Right-click on the series number and select Split to New Series. Set Archive state Correct Split to New Series Delete Del Display DICOM Header 5. The new series will be labeled Split from and listed, in order, un- der series #991. 991 Split from Body 2 XA 6. The series name can then be corrected and resent to PACS. Correct Unrestricted 0 Published by Siemens Healthineers AG © Siemens Healthineers, 2025 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: 01/15/2025 | QR700017513 Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the soft- ware and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please con- tact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2025 Siemens Healthineers Headquarters Siemens Healthineers AG Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com Unrestricted 0 Published by Siemens Healthineers AG © Siemens Healthineers, 2025 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: 01/15/2025 | QR700017513 Healthineers Page 2 of 2