Spine Autopilot | Workflow Demonstration

Once you have registered the patient for a spine examination, a new patient tab opens up man, your workflow is loaded into the work line. Click on start to start the examination. The auto aligned scout localizer starts running. When the localiser step is finished, the step icon changes color to indicate that images are available to be checked. Before continuing with the scan, click on the step icon to check if auto Align was successful in the viewing area. You can select and check the localizer images. Scrolling through all the orientations and frames when auto align was successful, you can click on continue to proceed with your examination. The Saggital steps start running. These steps are also needed for the following spine planning step. The spine planning step opens automatically in the work line when planning is needed, the spine planning step allows you to plan the examination and transversal orientation from the details area you can select first the sagittal image to be used for planning. The second the option for your transversal examination. And third on which vertebra or disc you want to center the transversal acquisition. When the plan is completed, confirm the selection with the ally button, then click on start to continue the examination. If you need some, modify the planning for the transversal step. Click on the replan button that appears in the details area of the spine planning step. You can modify the planning until the examination is finished. The planning for the transversal step will be automatically replaced. Then you can check the quality of the acquired images by clicking on the step icon. The summary view opens and you can select the images to distribute. Man finalize your examination by using the close button.

SIEMENS Healthineers Please note that the learning material is for training purposes only. Patients All Programs Examination Information Doe, Jane For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively pup ued KP08 "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest opon version of the software and hardware available at the time of the training. Spine Autopilot The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. SIEMENS uo!paps sue IV Please note: Some functions shown in this material are optional and might not be part of your system. 69 Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available Workflow Demonstration Medical Information in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Healthineers Please contact your local Siemens Healthineers sales representative for the most current information. Alerts The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders Program Selection will be liable for damages. auer All names and data of patients, parameters and configuration dependent designations are fictional and examples only. RF Transmit Mode All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Body part and Laterality @ Siemens Healthcare GmbH 2021 uogeu!Luex3 swaged Patient Orientation