Spine Exam | Replanning XA50

510 4:51 20 90 221 5:47 00:02 5:29 22 00:03 0:03 00:04 myExam Spine Autopilot: Replanning SIEMENS Doe, James Healthineers * 11/22/2003 M 127895 Spine Planning Select Planning Image. Select one option and define the scan region in the 10cm You can click on Replan to reposition the transverse slices after a plan has been applied. Graphics Replan Apply C-Spine Autopilot | Standard | 4:51 Remaining Time SAR Start Stimu NM Summary Quality 12:52:10 PM Reset There are different use cases in which you can use replan: Use Case 1 : Replan Transverse Slices Before Scanning image: medic tra Rotate CW Zoom / Pan Apply. 12:52:03 PM Plan the transverse examination and then click Within Spine Planning step, you can replan until you do not start the transverse scan. Stimu Use Case 2 : After Scanning C-Spine Autopilot | Standard Check Image 12:52:26 PM Transverse scan is running. Select / Deselect all Series Send To Send Print Printer Printer is in status Error Paper Size Print Layout 23 film sheet(s) will be printed After scanning, the summary step opens. Close Go to Spine planning to replan transverse slices. C-Spine Autopilot | Standard | 5:47 Remaining Time p2 Use Case 3 : After Stopping After Stopping the Scan 12:52:50 PM You stop transverse scanning. Stop Scan is stopped. Go to Spine Planning to replan modic tra C-Spine Autopilot | Standard | 5:29 Remaining Time t2_tse_tra Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthcare GmbH 2022