Spine Autopilot | Workflow Demonstration XA50

Register the patient for a spine autopilot examination and click on exam. A new patient tab opens and your workflow is loaded into the work line. Click on start to start the examination. The auto Align Scout localizer starts running. When the localizer step is finished, the step icon changes color and the thumbnail appears to indicate that images are available to be checked. Before continuing with the scan, click on the step icon to check if auto Align was successful. While reviewing the scanned images, an orange badge indicates that an action is needed in the check image quality step to proceed with the examination. After you have checked the auto align images, go to the check image quality step and click on continue to proceed with the sagittal scan. The sagittal step starts running. This step is needed for the following spine planning step. You can use the spine planning step after the first sagittal scan is acquired, or wait for it to automatically open in the work line. The spine planning step allows you to plan the examination in the transverse orientation. From the details area, first select the sagittal image to be used for planning. Second, select the option for your transverse examination. And third, select the vertebra or disk to center the transverse slices for the data acquisition. When the plan is completed, confirm the selection with the apply button. Then click on start to continue the examination. If you need to modify the planning for the transverse step, click on replan that appears in the details area of the spine planning step. The summary step opens. Check the quality of the acquired images by clicking on the step icons. In the summary step, select the images to distribute. After distribution finalize your examination by clicking on close.

127895 139078 27895 11/22/2003 012345 180 13907 1/22/2003 0:2 4:22 5:47 0:23 00:04 00:03 00:02 0:03 0:02 40 1054 496 1076 506 1058 498 107 508 1079 0:04 20 4:51 5:29 0:05 35 Siemens Healthineers presents Spine Autopilot Workflow Demonstration Scheduler Patient Registration Program Selection Medical Information Examination Information Patients (9 result(s), 6:14:04 PM) Doe, James Last Name Doe Admitting Diagnosis Procedure Accession Nr. Patient Date and Time First Name James Req. Proc. ID *11/22/2003, Male Alerts Study Description c-spine C-Spine Autopilot Study Comment Doe, Jane Middle Name Medical Alerts Date of Birth 11/19/2021, 18:14 Male Height Institution Doe, John Weight Institution Name *11/19/1966, Male Performing Physician Referring Physician Requesting Physician Operator RF Transmit Mode Any Polarization 11/19/2021, 16:25 Body Part and Laterality 11/19/2021, 16:37 Patient Orientation | Safety relevant information needs to be validated and confirmed Local Data 12:19:04 PM Waiting for scan instructions. Metric Feet First Head First Delet Year(s) Supine Allergies 180 cm Load Program to Queue Head First Supine Study Description c-spine C-Spine Autopilot 12:19:10 PM Healthineers First Name James SIEMENS * 11/22/2003 M 127895 AASpine_Scout Scan Time 0:23 min No images available yet C-Spine Autopilot | Standard | 14:31 Remaining Time SAR Start Stimu NM Check Image Spine planning Summary Quality Preparation Stop Scanning Check previous scan steps and press "Continue" to proceed with the examination. Continue Check Image Qua ... Stimu NM t1_tse_sag Anatomic regions were Series detected successfully Repeat Step Reset Rotate CW Zoom / Pan 10cm start AASpine Scout 12:20:00 PM Select one option and define the scan region in the image: medic tra Replan Apply Graphics Select Planning Image. modic tra p2 Rotate CW C-Spine Autopilot | Standard - Select / Deselect all Series Send Send To Print Printer is in status Error Paper Size Print Layout 18 film sheet(s) will be printed Close Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthcare GmbH 2022