Somaris X Reconstructions – Basic Reconstructions Video

Reconstruction training for summer is 10. Basic reconstructions. Since the introduction of Someries 10 and the Recon and GO technology. The reconstruction power straight from the acquisition workplace has been dramatically improved. There are now new powerful reconstruction methods. With no limitations on the amount of reconstructions that can be made. You now have the possibility to have packs ready post processing results done on the console and saved in the protocols. Dual energy spectral recons can now also be made straight from the console. Organ specific recons can be assigned and made for specific Recon ranges with zero clicks from the operator. Let's begin with the basic reconstruction possibilities. First, we have fixed axial reconstructions. These reconstructions are straight axial reconstructions. And you would use these if you need thin straight slices for post processing needs on a separate workstation. This option will always include the smallest slice thickness that is possible in the current scan mode. The Axial Recon range cannot be rotated and is processed the exact way the slices were acquired. Alpha technology can be used for fast planning, but no fast 3D is available. And only square matrices are allowed. If fixed axial is turned off, you would then have the possibility to perform a reconstruction in any plane such as an axial, coronal, or sagittal plane. These images are patient oriented and can be rotated in workstream 4D. Alpha technology is available for both fast planning and fast 3D. Also squared and non squared matrices are available. Now to discuss the new reconstruction methods introduced in Seoul Marist 10. First, we have the orientation multi reconstructions. This reconstruction method will give you two or three different orientation planes and axial, coronal, or sagittal, all grouped together in one reconstruction job. All orientation planes must have the same settings for slice thickness, Colonel window and Keir level. Fast planning and fast 3D are available. Along with squared and non squared matrices. Along with orientation multi there is also the ability to have impression multi reconstructions. With impression multi you may have up to three different series, all grouped together in one Recon job, but with three different impressions. In this method you can have fixed axial turned on for all straight axial reconstructions or have it turned off and any orientation can be used. For instance, you may select to have three axial coronal or sagittal's with different kernels. Windows and Keir levels. The same slice thickness is required for all that are grouped. Square and non square matrices are available.

SIEMENS .. Somaris X with Recon&GO Oprientation Multi Reconstructions Imprensation Multi Reconstructions Orientation Multi Recons (3) rientation Multi Recons (3 Fixed Axial Reconstructions ientation Multi Reconstructions No Fixed Axial Reconstructions Non Fixed Axial Reconstructions Omprientation Multi Reconstructions No limit on Reconstructions Impensation Multi Reconstructions Orientation Multi Reconstructions Impressation Multi Reconstructions Impression Multi Recons (3) Healthineers Healthineers••:•• SIEMENS .. Healthineers When to use When to use If either 2 or 3 different recons are required with different image or 3 different recons are required with different image Multiple series grouped into one reconstruction task slices in one of these orientation: axial slices impression settings, like: • Powerful new reconstruction methods Powerful new reconstructio methods • slices in 3 orientations: Orientation Thin slices down to 0.4mm e.g. for post processing auto Auto Window Recon Recon&GO • axial, coronal and sagittal • Recon range can not be rotated Kernel Slice thickness, kernel, QR and window must be the same for Slice thickness, kernel, QIR and window must be the same for ALPHA* technology available for FAST Planning, but no FAST 3D ALPHA* technology available for FAST Planning, int combination . sagittal Sagittal • No limit on reconstructions Fixed Axial Reconstructions No Fixed Axial Reconstructions Sagittal Orientation all orientations SIEMENS .. SIEMENS . Only squared matrix size • Recon range can not be rotated Only squared matrix sizeod Recon range can be rotated Fix Axial On and Off and and If at least 2 Orientations are required ALPHA* technology available for FAST Planning, int combination ALPHA* technology available for FAST Planning in combination Fix Axial Off: Any orientation can be used FAST Planning and FAST 3D can be used with FAST 3D Same Slice thickness and increment • Postprocessing reconstructions possible Mediastinum Mediatinum axial Axial Coronal Sagittal Orientation Bone Window Lung Sagittal . sagittal Fix-axial must be „Off" Squared and non-squared matrix possible Healthineers ' Healthineers squared and non-squared matrix possible General Recon I Recon&GO I Image Impression I Recon Box I I Auto Tasking I Inline Options I PhysioRecon I Auto Tasking I Inline Options Recon Box Auto Tasking ,nline Option. Squared and non-squared matrix possible Slice Thickness FAST Planning Increment QIR FAST with zero-click Multi Recons Physio Recon Kernel FAST Planning Width Scan/Recon General Recon I Image Impression I Recon Box I PhysioRecon I Recon&GO Image Impression I Recon Box I Image Impression I Recon Box I PhysioRecon I Physio Recon Auto Tasking I Auto Tasking Window Strength Axial postprocessing Slice Thickness Window Windew Fix Increment QIR FAST FAST FAST FAST Recon Favori... Recon Favorites General Recon I General Recon Recon&GO Image Impression Image Impression I Recon&GO Recon Box Multi Recons Physio Recon Multi Recon' Auto Tasking I Auto Tasking I Inline Options Inline Options Image Impression I Recon Box I Physio Recon I Auto Tasking Multi Recon' Multi Recons Recon&GO FAST Planning FAST Planning Width Scan/Recon Scanl Recon Scan/ Recon QIR Mediastinum Thorax - Lung 5,CO 03 S,CO 03 one Imml [mm] Strength Axial Planni... Strength 3D Basic Reconstructions Sagittal FAST Planning FAST Planning Width Width Height Fixed Axial Reconstructions Thorax 5.00 8r40 Q3 ax Thorax 5.00 Br40 Q3 ax Slice Thickness Soft Tissue Br40 Increment QIR FAST Bone Inline Results Multi Recons Scan/Recon Image Order FAST FAST 3D HD Fov Multi Recons Physio Recon Kernel FAST Planning FAST Planning Width ScanlRecon Orientation Windth Width [mm] [mm] [mm) Strength Planni... 3D Thorax 5.00 Q2 axr Thorax 5.00 Q2 ax Thorax 5.00 Q3 co Thorax 5.00 ax Orientation Multi Recons (3) Impression Multi Recons (3) Impression Multi Recons (2) ientation Multi Recons (3 rientation Multi Recons ( Thorax - Lung Thorax Q3 ag Thorax 5.00 QI ax Thorax 5.00 QI axr 5.00 Off Thorax Q3 sag 5.00 Lung Thorax 5.00 8r40 Q3 ax Thorax 5.00 Q2 ax Thorax Q3 sag Thorax 5.00 Q ax Thorax 5.00 QI axr Bone Bone Bone Thorax 5.00 Q3 cor Thorax 5.00 Br40 Q3 ax Thorax 5.00 Q3 axr Thorax 5.00 8r40 Q3 axr Head to Feet Off Thorax - Lung 300.00 Orientation Multi Recons (3) Impression Multi Recons (2) soft Tissue Br40 soft Tissue Br40 on Thorax - Lung Windew Window 5.00 one on Thorax Q3 sag Thorax - Lung Thorax 5.00 ax 1.50 Thorax 5.00 Br40 Q3 sax Thorax 5.00 Br40 Q3 cor Thorax 5.00 Br40 Q3 sag prientation Multi Recons (3 Orientation Multi Recons (3 Impression Multi Recons (3) ientation Multi Recons Orientation Multi Recons (3 mpression Multi Recons (2 Impression Multi Recons (3) Multi pressation Multi Recons (3 Impression Multi Recons (3 Impression Multi Recons (3) Impression Multi Recons (2 Impression Multi Recons (3c *ALPHA: Automatic landmark parsing of human anatomy irientation Multi Recons (3 0.60 500.00 6.00 600.00 300.00 Clinical images courtesy of University Clinic Zurich, Switzerland HOOD05162003243081 HOODOS162003243081 Clinical images courtesy of Hong Kong Sanatorium Hospital Clinical images courtesy Of Hong Kong Sanatorium Hospital Unrestricted O Siemens Healthineers, 2021