Shoulder Exam | Position Patient

In this video you will learn how to position the patient for a shoulder examination. To connect the coil plug, slide the plug into the socket to remove the coil plug, grasp the plug housing and slide it out before performing the examination. Register the patient fill in the required data and select the program the select and GO display provides you further guidance for the different steps of positioning the patient. For a shoulder examination, position the patient head 1st pay attention to put the head cushion on the line indicating arms examinations on the cover. Remember that the select and go automation will work with the patient's head in this position to get an optimal image result, slide the patient toward the side of the table so that the shoulder to be examined is placed as much as possible in the center of the table. Connect the coil in the most suitable coil socket one or two. Position the coil under and around the shoulder and fix it with the loop strap. Ensure that the region to be examined is covered within the side flaps of the coil. If using the contour S coil, the position should be as precise as possible. Add additional sandbags and positioning AIDS to ensure patient comfort. Ensure that the hand of the examined side is positioned with the palm upwards. Check again that you position the patient safely, provide the headphone and the alarm ball for communication. Ensure that the coil cable does not hang over the sides of the patient table and does not create loops. Use the select and go panel for automatic isocenter positioning or check position on the ruler to provide manual ISO input at the panel for correct Isos entering finally physician. The table into the bore at Isocenter using the isocenter button and the jog

SIEMENS -h Healthineers Healthineers • Scheduler SIEMENS Healthineers SIEMENS SIEMENS . SIEMENS SIEMENS . SIEMENS Healthineers • Healthineers Patients All programs Doe, Jane Examination Information Doe, Jane Should 10 Shoulder Exam 155 • Age SIEMENS @ Siemens Healthcare GmbH, 2021 Medical Information Position Patient Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not Please note that the learning material is for training purposes only. MAGNETOM Free.Max Healthineers (yet) be commercially available in your country. Due to regulatory requirements, the future availability of For the proper use of the software or hardware, please always use the Operator Manual or Instructions for said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers Alerts Program Selection MAGNETOM Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used sales representative for the most current information. Free.Max MAGNETOM Free.Max MAGNETC' MAGNET Free.Max as training material only and shall by no means substitute the Operator Manual. Any material used in this Program Selection The reproduction, transmission or distribution of this training or its contents is not permitted without training will not be updated on a regular basis and does not necessarily reflect the latest version of the RF Transmit Mode software and hardware available at the time of the training. express written authority. Offenders will be liable for damages. Body Part and Laterality RF Transmit Mode The Operator Manual shall be used as your main reference, in particular for relevant safety information like All names and data of patients, parameters and configuration dependent designations are fictional and warnings and cautions. examples only. patient Orientation All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Please note: Some functions in this material are optional and might not be part of your system.