Shoulder Autopilot | Workflow Demonstration XA50

After registering a patient for a shoulder autopilot examination, click on exam and a new patient tab will open. Your workflow is automatically loaded into the work line. If the exam settings are fine, click on start. The auto Align Scout localizer starts running. Once the localizer step is finished, the needle moves to the check image quality step. The auto Align Scout step icon changes color and the thumbnail indicates that the images are available to be checked for image quality. Before proceeding, click on the auto Align Scout step and review the localizer images in all orientations. During the review, an orange badge indicates that an action is needed in the check image quality step to proceed with the examination. If the auto align was successful and the image quality is optimal, go to the check image quality step and click continue to proceed with the examination. The remaining steps will start being scanned. In the work line, you can always check the image quality by clicking on the icon for that step. To review the images. In the viewing area you can also zoom pan, rotate, flip and window the images to further assess the image quality. After all the steps are completed, the check image quality step opens. You can go back to the work line to finish checking the scanned images. If the Orange badge is displayed, an action is needed in the check image quality step to proceed with the examination. To move to the summary step, go to the check image quality step and click on continue. If auto transfer is disabled, you can manually select the series to be printed or exported by using the checkboxes. Then select the network node from the dropdown menu and click on send to send all the selected series. Images that have been sent to the network node are labeled with an icon. Click on close to finalize the patient examination and go back to the organizer.

139078 012345 90390 39078 10:33:31 4:44 5:33 3:56 5:42 5:35 0:29 00:04 0:04 00:03 0:03 00:02 5:47 2187 903 187 48 146 2098 869 2102 864 2984 467 2820 1117 5:03 0:02 753 356 363 44 796 382 671 599 267 285 727 800 792 389 933 93 53 987 461 1423 607 531 97 12/22 247 12 488 210 Siemens Healthineers presents Shoulder Autopilot Workflow Demonstration SIEMENS Healthineers Scheduler Patient Registration Program Selection Medical Information Examination Information Patients (9 result(s), 6:14:04 PM) Doe, Jane Last Name Admitting Diagnosis Procedure Patien T Procedure Date and Time First Name Jane Accession Nr. Doe, James Alerts Req. Proc. ID 5438b745-36c5-49 *11/19/2003, Male Study Description shoulder Shoulder Autopilot Medical Alerts Study Comment Middle Name Allergies Patient ID 139078 Date of Birth Institution 55 Year(s) Institution Name Female Performing Physician Height 165 cm Doe, John 55 kg Metric *11/19/1966, Male Operator Load Program to Queue RF Transmit Mode Any Polarization 11/19/2021, 16:25 Body Part and Laterality Rich 11/19/2021, 16:37 Patient Orientation Head First Supine | Safety relevant information needs to be validated and confirmed Delete Local Data Prior Studies 10:33:25 AM Waiting for scan instructions. Height 165 cm Weight 55 kg Cancel First Name Jane Shoulder Last Name Doe Exam 10:33:37 AM Shoulder Right | 31:02 Remaining Time AAShoulder_Scout Start Stimu NM Check Image Summary Quality * 11/19/1966 F 139078 Scan Time 0:29 min No images available yet Shoulder Autopilot | Standard | 31:02 Remaining Time Scout Stimu NM SAR Preparation Stop Scanning Check previous scan steps and press "Continue" to proceed with the examination. Continue Check Image Qua ... 10:34:01 AM AAShoulder Scout Repeat Step Series Anatomic regions were detected successfully 10cm Reset Rotate CW Zoom / Pan LP AL t1_se_sag pd_tse_fs_tra 5:03 min 4:44 min 5cm 5:33 min Rotate CW Pan Rotate Zoom Windowing RA 3:59 min Shoulder Autopilot | Standard t2_tse_fs_sag 5:35 min Select / Deselect all Series Send Send To Print Printer Printer is in status Error Paper Size Print Layout 29 film sheet(s) will be printed Close Study Description shoulder Shoulder Autopilot Weight U.S. Mandatory information Delet Right Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthcare GmbH 2022 Hea