Select&GO Isopositioning

Doe, John Doe, John Brain Doe, Doe, John John Coils Spine Coil Brain Brain Brain Spine Coil Table Position Coils Head/Neck Coil Set Isocenter Table Position Head Please note that the learning material is for training purposes only. Head Head/Neck Coil Spine Coil Head Range O 130 L-Spine Isocenter 897 mm 526 mm Home Check how to use Table Position Enter the Iso 47 For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively When selecting the Home C-Spine I Neck C-Spine Neck "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute Head/Neck Coil the ruler Input read from the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest region to be scanned, the Coils C-Spine I Neck version of the software and hardware available at the time of the training. L-Spine C-Spine / Neck Coils 130 mm 901 mm Home When the table is in When selecting the the table in the Coils L-Spine Iso position will be updated The Iso position will be The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. SIEMENS Set Isocenter 1018 mm 413 mm 782 mm 901 mm 212 mm 526 mm 897 mm 130 mm Spine Coil isocenter, the Home position Head/Neck Coil home position Table Position Coils and automatically selected Please note: Some functions shown in this material are optional and might not be part of your system. T-Spine Head/Neck Coil T-Spine L-Spine button will be auto selected. and enter the Spine Coil Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available L-Spine Healthineers in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. To move the table in Home Coils value on the Please contact your local Siemens Healthineers sales representative for the most current information. You can do manual During exam, position the table Head/Neck Coil position, press the jogwheel display The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders positioning by Spine Coil will be liable for damages. that the area to be scanned is button for 2 seconds. inserting Iso Input All names and data of patients, parameters and configuration dependent designations are fictional and examples only. placed in the isocenter The Iso position will be Iso position will be updated L-Spine Coils Head/Neck Coil Automatic positioning in isocenter Press the jogwheel button for one All rights, including rights created by patent grant or registration of a utility model or design, are reserved. from the display updated and automatically The display shows the connected coils @ Siemens Healthcare GmbH 2021 by using the available option second to move the patient table into selected Gui Table Iso: Head Iso: 47 and automatic isocenter positioning 47 the isocenter position Guidance Spine COIL possibilities Home Guidance Guidance Physio Table Iso: Head Table so: 47