POCcelerator™ Client Archive QC Results Job Aid

POCcelerator™ Client – SIEMENS Healthineers Archive QC Results Job Aid Browse / archive × Check QC results using the following filters: Timeframe from: 01/04/2015 until: Ward Model Device Siemens Healthineers i-Stat All Archive QC Results All available sample types, analytes, levels and lots will be checked according to the criteria above. Do the following 1. Navigate to QC Monitor Browse 2. Select the QC chart tab 5 Ou Archive Archive ........................... 3. Select the appropriate filter options Archived data cannot be changed anymore. After archiving it will not be possible to insert any additional data measured in the archived period. Please make sure that 4. Select Quality controls > Browse/archive in the Menu bar any data from that period contained in the Incomplete QC Data table is completed prior to archiving. • The Browse/archive window opens 5. Select the Archive radio button Set archive date 6. Set an archive date and time 6 31/03/2022 23:59:59 7. Select Ok POCcelerator Client starts the archive process OK 7 Cancel • 8. In the Archiving of QC series window, highlight a measurement 39Archiving of QC series series and enter a conclusion comment for a marked Ward Model Device Sample ty Analte Level Lot Comment Lhiversitatsward 800DA 22 (11112) Vollblut Van Level 1 179-1-920 measurement series OR mark multiple measurement series to Universitätswerd 8000A 22 [11112) 6 Vollblut Citrate AlLevel 1 12348 Universitätsward 8000A 22 (11112) Vollblut Glu Level 1 12347 add a conclusion comment Universitätswerd 8000A 22 [11112) Vollblut Lovel t 12347 Universitätsward 8000A 22 [11112) Vollblut Lang Level 1 12347 When outliers get Lhiversitätsward 8000A Z2 (11112) Vollblut Lang Level 1 Calc archived, they will no longer be displayed in 9. Select Archive all to confirm your input Universitätsward 8000A 22 (11112) 7 Vollblut Van Level 1 12347 the tramc light Universitätsward 8000A 22 [11112) Vollblut Van Level 1 Calc Archived • The measurement series will be archived 8 measurements can no longer be updated Archive all 9 Cancel Note: Each QC series needs a conclusion comment before Comment for archiving QC data archiving, unless in Extra > Program Options > QC the Allow Select. 4 out of 8. archiving of measurement series without conclusion 1 comment checkbox is selected. Template Effective Date: 10 Aug 2021| HILS2223 Effective Date: 18 Aug 2023| HOOD05162003368889 Unrestricted © Siemens Healthineers, 2023 SIEMENS Healthineers Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. POCcelerator and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc., or its affiliates. All other trademarks are the property of their respective owners. © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens-healthineers.com 2 Template Effective Date: 10 Aug 2021| HILS2223 Effective Date: 18 Aug 2023| HOOD05162003368889 Unrestricted © Siemens Healthineers, 2023