How to manage patient movements while scanning Simulation

Continue Continue Welcome How to Manage Patient Movements While Scanning Simulation Imagine: While examining, the patient has moved. Therefore, you have to pause the examination. After that, you checked the image quality and recognized that it is affected by movement artifacts. This simulation will guide you through the typical steps to manage this situation. Practice ? To start the simulation, click Practice. If you need help for navigating through the simulation, click this button. Welcome Audio: How to manage patient movements while scanning simulation Imagine: While examining the patient has moved. Therefore you have to pause the examination. After that you checked the image quality and recognized, that it is affected by movement artifacts. This simulation will guide you through the typical steps to manage this situation. If you need help for navigating through the simulation, click this button. To start the simulation, click Practice. Simulation Repeat Scan To open the Details area of this step, click on t1_se_sag. You have paused the exam after T2 tra to check image quality. Open the Details area Audio: You have paused the exam after the t1 se sag step, to check the image quality. To open the Details area of this step, click on t1 se sag. Please click on t1_se_sag to continue. Click on Repeat step to retry the paused step. The images are affected by movement artifacts and need to be repeated. Repeat step Audio: The scan needs to be repeated, for example, because the images are affected by movement artifacts. Click on Repeat step, to retry the paused step. Please click on Repeat step to continue. The new scan is added after the currently running step. Therefore, you need to click on the Pause icon first, then on the Start icon. Click on Pause to continue. Click Pause Audio: The scan to be repeated will be added after the current step. Therefore, you need to click pause again, to restart the examination step. Click on Pause to continue. Please click on Pause to continue. The step is repeated and scanning starts. Step is repeated and scan is started Audio: The step is repeated and scanning starts. Congratulations! You have successfully completed the simulation. You can try the simulation again or, if you want to exit the learning activity, click Next to read the Disclaimer and then close the pop-up window. Retry Next Congratulations Audio: Congratulations. You have successfully completed the simulation. You can try the simulation again or if you want to exit the learning activity, click Next to read the Disclaimer and then close the popup window. Disclaimer Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2021 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com Disclaimer ? Disclaimer Navigation Help Select the icon above to open the table of contents. Click Next to continue. Next Welcome Slide The timeline displays the slide progression. Slide the orange bar backwards to rewind the timeline. Click the X in the upper right corner to exit the navigation help. Timeline HOOD05162003203348 | Effective Date: 23-Jun-2021 1.1 Welcome 2 Simulation Repeat Scan 2.1 Open the Details area 2.2 Repeat step 2.3 Click Pause 2.4 Step is repeated and scan is started 2.5 Congratulations 3.1 Disclaimer