ACUSON P500 Ultrasound System syngo Velocity Vector Imaging (VVI) Quick Card 3.0

ACUSON P500 Ultrasound System syngo Velocity Vector Imaging (VVI) Quick Reference Card siemens-healthineers.com/p500 SIEMENS ACUSON 7300 ........................... 3.0 Software Release SIEMENS Healthineers syngo Velocity Vector Imaging · 3.0 Software Release Step 1 Step 4 • For Global Longitudinal Strain (GLS), choose Apical • To analyze a clip without an ECG or with a poor 4 chamber (A4C), Apical 2 chamber (A2C), and ECG, select Sequence / M-mode selection icon Apical 3 chamber (A3C) views to define one cardiac cycle within the period • For Global Circumferential Strain (GCS), choose selector Parasternal Short Axis at the mitral valve level • If only one cardiac cycle is to be analyzed, drag (SAX MV), papillary muscle level (SAX PM), and and drop the red markers to desired cardiac apex level (SAX APEX) cycle Tip: Frame rate range of 60–90 fps is recommended for optimal tracking results. Step 2 Show Selected • Enter Review • Select images needed for VVI analysis • Select the gray arrow in the top right corner of • Select Show Selected to view the screen to return to the contour page selected images syngo VVI • Select syngo VVI Step 5 • Place markers at endocardial border according to placement guide for systole and then diastole Step 3 Press Set key for medial and lateral annulus - • Select image(s) from the thumbnails and assign to the Press Update key to “End” trace at the apex - corresponding views 3.(8) End Apical X Sax Atrium Set Set A4C SAX M Atrium IX A2C SAX PM RV RV 13C SAX APEX Step 6 O • For manual trace, place series of markers using Set key along the endocardial border in a clockwise rotation for systole and then diastole Tip: To delete an image, select the X in the upper right-hand • Anchor the last point using the Update key to “End” corner. the trace Step 7 • Select Update key or select Start Analysis icon to begin analysis for each contour for systole and then diastole 2 siemens-healthineers.com/p500 3.0 Software Release · syngo Velocity Vector Imaging Step 8 Step 12 • Evaluate tracked contour prior to • Select Segmental Analysis icon advancing to analysis • To edit the contour, use Set key to drag and reposition red or blue Step 13 markers • Evaluate the Segmental Analysis page Tip: Red markers move a large segment and blue markers move a small segment. • At the top of the page, different parameters can be selected such as Velocity, Displacement, Strain, and Strain Rate Step 9 Displacement Strain Rate Transverse Strain O Strain Seg PK % ES TTP ms 03-basal inf/sept 32.8 5.8 706 n Transverse St 09-mid inf/sept 26.5 26.3 361 14-apical septal 21.0 19.1 465 Press Update or select the Accept Changes 16-apical lateral 27.8 23.6 465 • 12-mid ant/lat 102.5 101.1 361 06-basal ant/lat 115.6 114.9 361 Average 48.5 48.5 396 icon in the top right corner Maximum Opposing Wall Delay : 345 ms 700 1 le To Peak 361 ............. 785 052/0000/2811 ms. (64) 2% 7% -24.60 0% 18 63 -1% 49.20 -14 73.30 Step 10 34% -50Phase+50 -2% 319 -20 467 467 ms- -123.00 • A main analysis page will be displayed 30.00 0928 ms 430 430 24.00 Longitudinal Strain (endo ) 430 361 Seg. Pk % ES TTP ms 03-basal inf/sept -13.6 -13.5 430 09-mid inf/sept 430 Endescs 14-apical septal 430 037/78 034/1191/2571 ms. (70 bpm) ES O ACUSON 9100 o fime To Pea 16-apical lateral 430 12-mid ant/lat -25.2 -25.2 361 P4-2 veces 06-basal ant/lat 361 Cardiac Average -23.1 -22.8 430 Maximum Opposing Wall MI 0.98 Delay : 69 ms TIS 0.7 es-gls endo -23.02 % 2% 27-27 les-gls myo -17.37 % es-gcs endo -27.42 % 1% 12 18 CE Low -2% n R 60 dB es-gcs myo -16.92 % 13 14 11 3.5 MHZ 18 -5% -50Phase+50 81300 1950 467 30.00 % Average 123.00 Volume TOVICH 355.00 Step 14 Average MyoGCS -14.32 % 1.00m eD ml Average MyoGLS -15.64 650 EndoGCS -23.59 O ES EndoGLS -21.16 Phase Export Export Peak EF 54.75 EDV 111.39 101 • Options for analysis are: Image Data ml ESV 50.33 ml 2.79 GRS 43.84 % ESL 6.55 cm o ESObas 3.04 cm 18.7 EDL 7.86 cm -23.8 -21.1 84 Export Image EDObas 4.08 cm - EdLVmass 79.16 10 EsLVmass 98.04 SD-TS-Syst. 29.0 17.1 -13.8 30 SD-LS-Syst. 5. Export Data 11.4 41 32 29 - Export Clip Export Save to 35- -19.8 30 - st. Transverse Strain GLS vonpeu dey queso Syst. Myo Longitudinal Strain% 10203040506070 20 % , 102 % Save to Report Clip Report - Step 11 Sa Dy • To edit the contour, select the S or D icon: Once Correct ES Border is selected, a - new tracking will be initiated If Correct ED Border is selected first, the - Correct ES Border contour tracking will not be initiated siemens-healthineers.com/p500 3 For the proper use of the software or hardware, please always use At Siemens Healthineers, we pioneer breakthroughs in healthcare. the Operator Manual or Instructions for Use (hereinafter collectively For everyone. Everywhere. By constantly bringing breakthrough “Operator Manual”) issued by Siemens Healthineers. This material is innovations to market, we enable healthcare professionals to deliver to be used as training material only and shall by no means substitute high-quality care, leading to the best possible outcome for patients. the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest Our portfolio, spanning from in-vitro and in-vivo diagnostics version of the software and hardware available at the time of the to image-guided therapy and innovative cancer care, is crucial training. The Operator Manual shall be used as your main reference, for clinical decision-making and treatment pathways. With our in particular for relevant safety information like warnings and strengths in patient twinning, precision therapy, as well as digital, cautions. data, and artificial intelligence (AI), we are well positioned to take on the biggest challenges in healthcare. We will continue to build Note: Some functions shown in this material are optional and might on these strengths to help fight the world’s most threatening not be part of your system. diseases, improving the quality of outcomes, and enabling access to care. Certain products, product related claims or functionalities described in the material (hereinafter collectively “Functionality”) may not We are a team of 66,000 highly dedicated employees across more (yet) be commercially available in your country. Due to regulatory than 70 countries passionately pushing the boundaries of what’s requirements, the future availability of said functionalities in possible in healthcare to help improve people’s lives around the any specific country is not guaranteed. Please contact your local world. Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. ACUSON P500 and syngo VVI are registered trademarks of Siemens Medical Solutions USA, Inc. syngo is a registered trademark owned by Siemens Healthcare GmbH. Siemens Healthineers Ultrasound owns the rights to all images. Siemens Healthineers Headquarters Manufacturer Siemens Healthcare GmbH Siemens Medical Solutions USA, Inc. Henkestr. 127 Ultrasound 91052 Erlangen, Germany 22010 S.E. 51st Street Phone: +49 9131 84-0 Issaquah, WA 98029, USA siemens-healthineers.com Phone: 1-888-826-9702 siemens-healthineers.com/ultrasound Published by Siemens Medical Solutions USA, Inc. · HOOD05162003265841 11935 0322 · ©Siemens Medical Solutions USA, Inc., 2022