ACUSON P500 Ultrasound System Anatomical M-mode (AMM) Job Aid

ACUSON P500™ Ultrasound System 3.0 SW release Anatomical M-mode SIEMENS. Healthineers (AMM) Job Aid siemens-healthineers.com/ultrasound Anatomical M-mode (AMM) allows free rotation and repositioning of the M-line to align onto the two-dimensional (2D) image independent of the transducer alignment Step 1 • Select a compatible transducer, preset and press the M key on the control panel* Step 2 • To activate AMM, either rotate the Angle key on the control panel or select Angle AMM on the left Angle AMM panel of the touch screen Angle • Rotate the Angle key to adjust the angle of the AMM cursor Step 3 P500 • Configure the direction of the cursor with the touchpad Reposition the entire cursor by sliding one finger • across the touchpad Position Position 15 cm Marker Marker AMM AMM *AMM is only available on the P4-2, P8-4, 10F, 8F, and 5VT transducers with a cardiac preset. Unrestricted | Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2022 Master Template Effective Date: 10 Aug 2021 | HILS 2224 SIEMENS Effective Date: 03 June 2022 | HOOD05162003274210 Healthineers Job Aid | Anatomical M-mode (AMM) ACUSON P500 system | 3.0 SW Release Effective Date: 03 June 2022 | HOOD05162003274210 Step 4 P500 • To reposition the origin, direction, and length select the Marker AMM on the touch screen and press the Set key or tap the touchpad to reposition and anchor the cursor origin and ending direction of the AMM cursor (green arrow) 15 cm Set Set AMM P44 Cardias 100% TIB 1.4 Best Practice Techniques THI F 3.6 MHZ 0 40 10 Bpm Fig. 1 – The AMM sweep corresponds to the cursor path. The top of the AMM sweep is the cursor's origin, and the bottom edge of the AMM trace aligns with the ending direction (grey arrow) on the 2D image. The depth units on the trace indicate the length of the cursor. Reduce the width of the Increase the frame rate and improve the temporal and spatial 2D sector resolution of the AMM trace Intersect the cursor over Ensure reapplication of the optimal cursor positioning for any segments of cardiac walls follow-up examination Intersect the cursor with Evaluate valvular motion regardless of transducer alignment or cardiac valves electrocardiography trace Evaluate the cardiac In utero comparison of the atria or ventricles and other cardiac motion of the fetus structures Optimize the sweep speed Very high or low heart rates impact the number of cardiac cycles for timing displayed on the AMM trace Document movement Utilize the AMM sweep to view respiratory motion of the inferior vena cava (IVC) or record lung movement and artifacts SIEMENS Page 2 of 3 Healthineers Job Aid | Anatomical M-mode (AMM) ACUSON P500 system | 3.0 SW Release Effective Date: 03 June 2022 | HOOD05162003274210 References Moy, R.J., Chapman A.L., and Bapusamy A., (2010). The effectiveness of an informal teaching program for junior doctors identifying pleural effusions using ultrasound at the bedside. J R Army Med Corps, 156 (4), 233-5. Mada, R.O, Lysyansky, P., Daraban, A.M., Duchenne, J. Voight, J.U. (2015). How to define end-diastole and end- systole? Impact of timing on strain measurements. JACC Cardiovascular Imaging, 8 (2),148-157. Carerj S, Micari A, Trono A, Giordano G, Cerrito M, Zito C, Luzza F, Coglitore S, Arrigo F, Oreto G. (2003). Anatomical M-mode: an old-new technique. Echocardiography, 20 (4), 357-6. Feigenbaum H. (2010). Role of M-mode technique in today's echocardiography. Journal of the American Society of Echocardiography, 23 (3), 240-57. Menegatti E, Tessari M, Gianesini S, Vannini ME, Sisini F, Zamboni P. (2014). Human internal jugular valve M-mode ultrasound characterization. Current Neurovascular Research, 11 (2), 149-55. doi.org/10.2174/1567202611666140408094014 Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. ACUSON P500™ is a trademark of Siemens Medical Solutions USA, Inc. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2022 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com SIEMENS Page 3 of 3 Healthineers