ACUSON Origin System Overview Presentation

SIEMENS Healthineers SIEMENS Healthineers .. ACUSON Origin Ultrasound System System Overview 2.0 software version 1 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No. 1 SIEMENS Healthineers Objectives SIEMENS. Healthineers ... ACUSON • Review external features Origin • Identify Monitor, Control Panel, and Touch Screen Origin • Describe transducers • Review peripherals • Discuss care and cleaning 2 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No. 2 SIEMENS Healthineers System features SIEMENS . Healthineers ... 13.3” 24" LCD tiltable Monitor Touch Screen Adjustable Control 125 kg Panel & weight monitor (275 lbs) 4 Easy transducer wheeling ports / 1 castors pencil port 3 Unrestricted © Siemens Healthineers 2023 Speaker Notes: Some of the key features of the ACUSON Origin ultrasound system include: • A 24” Dual Layer LCD monitor • A fully adjustable Control Panel and monitor with multiple points of articulation • Easy wheeling castors • A 13.3” Touch Screen with 30 to 60 degrees of tilt adjustment • A weight of 125 kg (275 lbs) • Four active transducer ports and one CW pencil port • Transducer cable hooks are located on the front and back of the Control Panel, allowing for organization when using multiple transducers. Notes No. 3 SIEMENS Healthineers Screen saver SIEMENS. Healthineers ... ACUSON Origin 4 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The system supports a screen saver feature with images of nature. This is a great feature to display should the sonographer/ physician have to leave the room during an active study or between patients. To set the timing of the screen saver, select the System Configuration Menu > System Settings > Display. This is especially important for interventional procedures to set at 120 minutes so it does not activate in the middle of a procedure. Choices are 1-120 minutes. The screen saver can be enabled at any time by pressing the additional selection control on the Touch Screen and selecting Enable Screen Saver. Once in screen saver, moving the trackball or selecting any control will return to the primary monitor display. Notes No. 4 SIEMENS Healthineers System size and control panel articulation SIEMENS . Healthineers ... • Small footprint • System Weight: 125 kg (275 lbs) • Control panel rotates 45 degrees in either direction 54.7 in +/- 45° +/- 45° (139 cm) 22.8 in 33 in (58 cm) (84 cm) 5 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The ACUSON Origin system has a small footprint and weighs 125 kg (275 lbs). The dimensions of the base of the system are 22.8 in x 33 in (58 cm x 84 cm). The system height, with the monitor in its lowest position, is 54.7 in (139 cm). The Control Panel has multiple points of articulation. There are rotation adjustments below the Control Panel as well as at the base of the system. Both points rotate 45° in either direction, for a total of 90° to the right and left. This allows the transducer ports to be located on the front or on either side of the system. It also allows scanning from different positions, optimizing the experience for different users. Notes No. 5 SIEMENS Healthineers System articulation SIEMENS. Healthineers ... Monitor Rotates to the left and Monitor right height +/- 45° adjustment 4.3 in (11 cm) Control Monitor Arm panel height rotates adjustment 170 to the 9 in (23 cm) right and 130 to the left 6 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The Control Panel height adjustment range is 9 in (23 cm). The monitor height adjustment range is 4.3 in (11 cm). The monitor has three points of articulation: • The monitor rotates to the left and right 45° • The arm of the monitor has rotation adjustments at the top and bottom. The top adjustment rotates 170° to the right and left and the bottom adjustment rotates 130° to the right and left This allows the monitor to be rotated a total of 360°. Notes No. 6 SIEMENS Healthineers Storage SIEMENS. Healthineers ... healthineers Rear basket Control Panel bin with large tray and rear basket 7 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The system includes multiple areas of storage: • Rear basket with non-slip • Back panel storage bin • Control panel storage bin (located behind the Control Panel) The large tray fits directly over the rear basket via gravity and is great for TEE storage. It can easily be lifted off to carry TEE transducer for cleaning post procedure. The control panel storage bin can hold a large container of sanitation wipes as well as other supplies. Notes No. 7 SIEMENS Healthineers Transducer ports SIEMENS . Healthineers ... Five transducer ports • Four active imaging ports • One CW pencil port • Transducer storage for two transducers 8 Unrestricted © Siemens Healthineers 2023 Speaker Notes: There are five transducer ports: four active imaging transducer ports and one CW pencil port located under the panel (orange arrow). Storage is also located below the transducer ports and can hold up to two transducers. Notes No. 8 SIEMENS Healthineers Connections SIEMENS . Healthineers ... Control panel bin with panel Control panel bin with panel Connections closed Open 9 Unrestricted © Siemens Healthineers 2023 Speaker Notes: To connect to an external monitor, the connections are accessed behind the real control panel bin. Slightly pull on the back storage bin and the door will open. A display port is available (large arrow). An ethernet connection is available as well (small arrow). Notes No. 9 SIEMENS Healthineers System castors / steering SIEMENS. Healthineers ... Easy wheeling castors • Central steering • Lock • Rear wheel lock / swivel 10 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The system has easy wheeling castors with central steering and lock capabilities. • Press the left (green) pedal down to place the wheels in a swivel lock position for steering capabilities • Press the right (red) pedal down to lock the wheels • Align both pedals to place the wheels into a neutral position and unlock the wheels The rear wheels have locks that allow for individual lock and swivel capabilities. Notes No. 10 SIEMENS Healthineers Power on and hibernate mode SIEMENS . Healthineers ... • Boot-up time from complete shutdown – 150 seconds • Boot-up time from hibernation – less than 40 seconds • Up to 20 cycles with each complete shutdown Note: No standby time limit between exams. 11 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The system boots up in approximately 150 seconds from complete shutdown. Boot-up time from hibernation mode is less than 40 seconds. Note: There is no time limit between exams for hibernation mode. The system will remain in hibernation until powered on again. Note: The number of hibernation cycles remaining will be displayed on the screen when the power button is pressed to turn the system off. This number starts over at 20 cycles with each complete shutdown of the system. Notes No. 11 SIEMENS Healthineers Objectives SIEMENS. Healthineers ... ACUSON • Review external features Origin • Identify monitor, Control Panel, and Touch Screen Origin • Describe transducers • Review peripherals • Discuss care and cleaning 12 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No. 12 SIEMENS Healthineers Monitor SIEMENS . Healthineers ... ACUSON • 24" High dynamic range, dual layer, LCD display Origin • HD Resolution (1920*1080) with a 16:9 aspect ratio • Contrast ratio of 200000:1 • Wide viewing angle of 80 degrees • Dark gray monitor bezel improves perception of contrast resolution • Integrated sensor for luminance stabilization ACUSON Origin™ and tracking calibration • MediCal QAWeb supported for quality assurance Monitor 24” Dual layer LCD 13 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The monitor is a 24" High dynamic range(HDR), dual layer, LCD display monitor. The monitor bezel is a darker gray color which can improve perception of contrast resolution. • HD Resolution (1920*1080) with a 16:9 aspect ratio • Contrast ratio of 200,000:1 Benefits of the Dual Layer LCD Panel: • It has a wide viewing angle of 80 degrees and offers lower power consumption • The monitor provides an increase in dynamic range or contrast due to the dual layer LCD which is composed of one backlight with two LCD panels • It a wider Color gamut. This increase provides richer and more vibrant red and green colors The monitor includes an integrated sensor to support automatic monitor calibration. The addition of this sensor includes compatibility with third party software MediCal QAWeb which has quality assurance tools for medical imaging monitors. Monitor settings are located on the back of the monitor (brightness, contrast, etc) but can only be changed by service. Notes No. 13 SIEMENS Healthineers Monitor SIEMENS . Healthineers ... origin Articulation 360° of swivel & folds down completely 14 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The monitor has multiple points of articulation which allow it to move up and down and 360° of rotation and fold down while transporting the system.. Notes No. 14 SIEMENS Healthineers GSDF (Grayscale display function) SIEMENS . Healthineers ... In addition to linear gamma monitor output, the new monitor Monitor Settings supports three DICOM calibration options. NOTE: All monitor setting changes require a reboot to take effect. You are responsible for Initiating the reboot after changing these settings Monitor output options include: Enable Monitor GSDF Linear Gamma Ambient Light: GSDF DarkRoom (Default) O DarkRoom Bedside Black Test GSDF Bedside OperatingRoom GSDF Operating Room ACUSON Graybar Test Origin 15 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The ACUSON Origin monitor has a GSDF configuration option. In addition to linear gamma monitor output, the monitor supports three DICOM calibration options which are configured from the service pages. The lighting condition options are used to maintain optimal image quality regardless of ambient lighting conditions. With the inclusion of these options, the Barco monitor supports the GSDF standard directly, thus providing an onboard GSDF compliant solution. When the ACUSON Origin monitor is configured for GSDF, and GSDF export is enabled, no conversion is needed when transferring to a review station with a DICOM monitor. The images will be taken at or with GSDF on and sent at or with GSDF on aiding in image consistency. This will be set-up by the applications specialist or service at the time of install for the most common usage, but can be changed by the user for different lighting conditions (portables, operating room, standard dark room scanning). Please review with your Siemens personnel on how and when to change. GSDF should be configured “On” if sending to DICOM monitors in the reading room and Linear Gamma if sending to non-DICOM monitors. Different settings can be applied if send to multiple locations by setting up different nodes. Notes No. 15 SIEMENS Healthineers Touch Screen SIEMENS. Healthineers ... ACUSON Tilting adjustment Origin ACUSON 30-to-60 degree Origin adjustment ACUSON Two USB ports Origin® ACUSON Origin Left side of Touch Screen 16 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The Touch Screen measures 13.3 inches and can be angled 10 to 30 degrees according to user preference and to minimize overhead light glare. Touch Screen options will differ depending on which mode or function is active. Available functions appear white and currently active functions appear orange. The rotary controls below the Touch Screen correspond to the soft key options. Exam management options are located on the left side of the Touch Screen. There are two USB ports located on the left side of the Touch Screen to export DICOM and PC format images/cases. The option to anonymize the data is done at Export. Only one USB should be used at a time. A selected set of images can be exported. For a complete understanding, please review the ACUSON Origin Exam Workflow presentation. The brightness of the Touch Screen is configurable from the System Configuration menu. Notes No. 16 SIEMENS Healthineers Control panel SIEMENS . Healthineers ... Update ... Five transducer holders Simple, intuitive design 17 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The Control Panel is simplified and intuitively organized so that minimal hand extension is required and easy to use. If a function control is available, it is backlit in white; If a function control is currently active, it is backlit in orange. The home base design includes Text Annotations, Measurements, Image and Clip Store, Update, and a multi-function trackball and Set controls. Major imaging modes are located above the home base. The Control Panel includes five transducer holders. Standard configuration is one long transducer holder, and four short transducer holders. An additional long transducer holder may be purchased. All transducer holders are configurable to any position. Notes No. 17 SIEMENS Healthineers Control panel SIEMENS . Healthineers ... -- ACUSON Origin Large gel holder Integrated gel warmer 18 Unrestricted © Siemens Healthineers 2023 Speaker Notes: An integrated gel warmer with adjustable temperature settings is also standard. A large gel holder is optional and may be purchased. The gel warmer can be positioned on the back left or right side. Notes No. 18 SIEMENS Healthineers Control panel keyboard SIEMENS . Healthineers ... 12 3 5 & 6 8 Tab 9 X W E R U O Caps Lock P A S D G H K Shift Enter X N TITT V B IN M Ctrl Delete Alt #+- Optional retractable keyboard Standard virtual keyboard Speaker Notes: Unrestricted © Siemens Healthineers 2023 19 The virtual keyboard on the Touch Screen is standard with the system. The virtual keyboard appears on the screen when controls on the system are selected and require a typing function. If the user needs the virtual keyboard for text, press the Text (ABC) button on the Control Panel and an option for the virtual keyboard will appear on the Touch Screen. The retractable keyboard is optional and contains the following language selections: English, German, Spanish, Danish, Norwegian, Swedish / Finnish, French, and Italian. Notes No. 19 SIEMENS Healthineers Objectives SIEMENS. Healthineers ... ACUSON • Review external features Origin • Identify monitor, Control Panel, and Touch Screen Origin • Describe transducers • Review peripherals • Discuss care and cleaning 20 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No. 20 SIEMENS Healthineers Transducers SIEMENS . Healthineers ... ACUSON Origin has 14 transducers available. Phased Volume TEE Linear Convex Pencil array Transducer design includes: Compact micro-pinless 5V1 5Z1 Z6T 14L5 5C1 CW2 • Retention pin 8V3 10L4 DAX CW5 • • Single crystal and 10V4 7L2 9C2 Matrix designs • Ergonomic 4V1 HLX improvements • Gesture detection 21 Unrestricted © Siemens Healthineers 2023 Speaker Notes: There are 14 transducers for the ACUSON Origin ultrasound system, including: • 5V1 • 5Z1 • Z6T • 8V3 • 10V4 • CW2 • CW5 • 5C1 • DAX • 4V1 • 9C2 • 14L5 • 10L4 • 7L2 • HLX The transducer design elements include: • Compact pinless design – no moving parts means improved reliability and durability as well as improved signal-to-noise ratio for increased image quality • Retention pin – provides audible feedback when transducer is properly inserted (a click) Notes No. 21 SIEMENS Healthineers Transducers SIEMENS . Healthineers ... Nosnar Gesture detection Five transducer ports Double-tap to easily activate • transducers Four active imaging ports • One CW pencil port 22 Unrestricted © Siemens Healthineers 2023 Speaker Notes: Most of the transducers have the gesture detection feature, which makes changing transducers efficient and simple. • An embedded accelerometer detects a double-tap which switches on the transducers • The following transducers have gesture control: 5V1,5Z1,7L2,10L4,14L5, DAX, 5C1, 9C2 and HLX. • There are also five transducer ports: four active imaging ports and one CW pencil port. The CW port is located above the imaging ports next to the physio module. Next, we will discuss some specific transducers. Notes No. 22 SIEMENS Healthineers 5V1 transducer SIEMENS . Healthineers ... Adult cardiac transducer 5V1 • Single crystal design • Six frequencies, including fundamental and harmonic • • H High frequency – second and third harmonic blending ACUSON • Ergonomic improvements – lighter, smaller footprint and handle, less cable drag • Gesture detection 23 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The 5V1 adult cardiac transducer has been designed for improved plunkability and ergonomic design. The 5V1 is a single crystal transducer with high sensitivity and ultra-wide bandwidth, providing increased resolution, signal to noise ratio, and high contrast harmonics imaging. There are six frequencies, including three fundamental (Res, Mid, Pen) and three harmonic frequencies (H Low, H Mid, H High). The H High frequency selection is a blending of the second and third harmonic components. This enables the penetration power of the low frequency (second harmonic) with the resolution of a higher frequency (third harmonic), providing reduced near field noise and side lobe artifacts, and improved endocardial delineation. Furthermore, single firing blended imaging provides better tissue texture without compromising frame rate. Notes No. 23 SIEMENS Healthineers 5Z1 transducer SIEMENS . Healthineers ... 2D / 4D Volume Cardiac transducer 5Z1 • Single Crystal Matrix Acoustic Design • RTV Silicone Window Design • Passive Cooling Design • Complete EMI Shield Design ACUSON • Ergonomic Nosepiece & Housing Design • Small Footprint & Light Weight • Six frequencies, including fundamental and harmonic • Gesture detection • Trophon Compatibility 24 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The 5Z1 adult cardiac Volume transducer is a single crystal matrix array transducer. There are six frequencies, including 2D fundamental (Mid 2.5MHz), three harmonic frequencies and three harmonic frequencies. There are two 4D frequencies Mid (2.5 MHz and HMid1.38 MH • Single Crystal Acoustic Design • RTV Silicone Window Design • Passive Cooling Design • Complete EMI Shield Design • Ergonomic Nosepiece & Housing Design • Small Footprint & Light Weight • Six frequencies, including fundamental and harmonic • Gesture detection • Trophon Compatibility . Notes No. 24 SIEMENS Healthineers 10L4 transducer SIEMENS . Healthineers ... 10L4 Vascular Transducer • Multi-row transducer allows greater focus in the elevation plane for increased penetration ACUSON • 3 -10 MHz bandwidth • 1 - 14 cm depth • Supports vascular imaging • Gesture detection 25 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The 10L4 transducer is the primary vascular transducer to support carotid and peripheral vascular imaging. • Multi-row transducer allows greater focus in the elevation plane for increased penetration • 3 -10 MHz bandwidth • 1 - 14 cm depth • Supports vascular imaging • Gesture detection Notes No. 25 SIEMENS Healthineers 5C1 transducer SIEMENS . Healthineers ... 5C1 Workhorse Transducer for Abdominal vasculature 5C1 • Single crystal technology • 180 Element with fine pitch for excellent resolution and steering performance ACUSON • 5 to 1 MHz wide bandwidth • Excellent intercostal access due to small footprint (45mm) • Supports abdominal vascular and deep peripheral venous imaging • Gesture detection 26 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The 5C1 single crystal transducer is the workhorse transducer for Abdominal Vascular imaging. It has a wide bandwidth from 5-1 MHz to support multiple types of bioacoustic properties. It has 180 elements with fine pitch to provide excellent resolution and steering performance. With it’s 45 mm aperture and tight curvature, it fits nicely through the ribs and is lightweight for ergonomic support. The 5C1 transducer supports 5C1 wide field of view imaging and Dynamic MultiHertz in the Abdomen and Abdomen difficult preset. Notes No. 26 SIEMENS Healthineers DAX transducer SIEMENS . Healthineers ... Deep Abdominal Transducer DAX • Multi-row transducer allows greater focus in the elevation plane for increased penetration • 1-3.5 MHz bandwidth ACUSON • 2.2 MHz center frequency • Up to 55 cm of penetration • Supports abdominal vascular imaging • Gesture detection 27 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The DAX (Deep Abdominal Transducer) is a break-through transducer design for improved image quality and color sensitivity at increased depths. It has a bandwidth of 1-3.5 MHz with a center frequency of 2.2 MHz. The lower frequencies allow for increased penetration with less attenuation. The DAX also has a larger elevation which allows for superior slice thickness at increased depths, reducing clutter and increasing contrast resolution for deep targets, up to 55 cm. The DAX transducer also has gesture detection capabilities. Notes No. 27 SIEMENS Healthineers Cable management SIEMENS. Healthineers ... ACUSON Origin ACUSON Origin ACUSON Origin Cable hooks located on the front and back of the Control Panel 28 Unrestricted © Siemens Healthineers 2023 Speaker Notes: Transducer cable hooks are located on the front and back of the Control Panel, allowing for organization when using multiple transducers. Notes No. 28 SIEMENS Healthineers Objectives SIEMENS. Healthineers ... • Review external features ACUSON Origin • Identify monitor, Control Panel, and Touch Screen Origin • Describe transducers • Review peripherals • Discuss care and cleaning 29 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No. 29 SIEMENS Healthineers Hardware - printer SIEMENS . Healthineers ... on-board Sony printer. COPY OPEN • Sony 898A6 BW Printer SONY Use bory Fried Medic • DC Power • Supports A6 sized prints (4.1 x 5.8 inches) DIGITAL GRAPTUC PRINTER UP-DASDOC • Printer bay now reversible and configurable by Service Engineer A6 A7 30 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The Sony 898 A6 black and white printer is available and is DC powered. It is capable of printing B&W prints in less than two seconds. Now, the thermal paper can be torn off in two different directions, both up and down, where the paper exits the printer. The Sony 898 printer can produce A6 standard sized prints (4.1 x 5.8 inches) whereas the prior Sony 711 printer produced A7 standard sized prints (2.9 x 4.1 inches). To support further customization, Service Engineers can now reverse the printer bay orientation. The printer can be oriented to face and print toward the left or the right of the system. Notes No. 30 SIEMENS Healthineers Blu-ray / DVD / CD combination drive SIEMENS. Healthineers ... • Recordable disc drive for storage, review and archival of data • Compatible with only Blu-ray disc or medical- grade DVD media SIEMENS Healthineers 31 Unrestricted © Siemens Healthineers 2023 Speaker Notes: A recordable disc drive is available for storage, review, and archival of patient and image data and is connected via USB from the rear connections. It is compatible with Blu-ray disc (BD) or digital video disc (DVD) media. The combination drive supports the following media: BD-R, BD-RW, DVD-R, DVD-RW, DVD+RW, AND DVD+R. The following media brands are recommended for use with the combination drive: Panasonic, TDK, and Maxell. Notes No. 31 SIEMENS Healthineers Foot Switch SIEMENS. Healthineers ... footilviech • Ideal for interventional cases Loft Middle Right • Up to three configurable functions Durst Burst Burst Flash Sequence Flash Sequence Flash Sequence Clip Save Clip Save Clip Save USB connection Color Color • CW CW CW DVR Record DVR Record DVR Record Auto TEQ Auto TEQ Auto TEQ Fromzo Freeze Freeze Full Screen Full Screen Full Screen Image Store Image Store M Mode M Mode M Mode Next View Next View Next View FSU-3000 Pause/Resume Protocol Pause/ Resume Protocol Pause Resume Protocol Previous View Previous View Previous View PW PW PW Review Review Review Harmonies Harmonics Harrnonics UD Print UD Print UD Print 32 Unrestricted © Siemens Healthineers 2023 Speaker Notes: A foot switch FSU 3000 is available as an option and has three pedals for three different configurable functionalities. The foot switch connects to the system with a USB. To configure the foot switch, select System Configuration > Peripheral Devices > Foot Switch. Select from the list of custom assignments available for each pedal. Notes No. 32 SIEMENS Healthineers Physio module SIEMENS . Healthineers ... • ECG with built-in respirometer • Auxiliary ECG connection 33 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The physio module includes an ECG input as well as connection for an auxiliary ECG source. It is located just above the transducer connectors. Open the door to access. The ECG has a built-in transthoracic impedance respirometer that can be activated. The auxiliary CW transducer connection can also be found in this location. The physio module is standard. Notes No. 33 SIEMENS Healthineers Software DVR SIEMENS .... Healthineers ... Stream compressed video feed to configured location 521 Cardiac TIS:0.43 MI:0.99 • Output stream selection – USB, network, DVD 19.0vps 4D Compression format • Full 1080P recording • Can be played in a standard Blu-ray DVD player or USB / network drive Start / Stop integrated into workflow • Easy access on Touch Screen 34 Unrestricted © Siemens Healthineers 2023 Speaker Notes: A software DVR is available to stream compressed video feed to a configured location. Recorded video can be configured to export to a USB drive, network, or DVD. Files are recorded in full 1080P recording. They can then be played in a standard Blu-ray DVD player or from a USB / network drive. There is a 30 minute time limit before it will start a new file. The example in the current slide demonstrates a DVR recording using the 3D caliper tools in Volume imaging. This is a great tool if you are preparing education presentation or wish to record a feature step by step for educational purposes. Note: In order to play the file on a computer, additional software may be needed (for example, windows media player). In order to upload the file into a PowerPoint presentation, QuickTime may be needed. Notes No. 34 SIEMENS Healthineers Objectives SIEMENS. Healthineers ... • Review external features ACUSON Origin • Identify monitor, Control Panel, and Touch Screen • Describe transducers Origin • Review peripherals • Discuss care and cleaning C 35 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No. 35 SIEMENS Healthineers Cleaning the system SIEMENS. Healthineers ... 1. Power off the ultrasound system and unplug the power cord from the power supply 2. Use a clean gauze pad or lint-free cloth, lightly moistened with a mild detergent, to wipe: • Touch Screen and monitor • Control panel • Trackball and slide controls 3. After cleaning, use a clean, lint-free cloth to dry TIP Ensure that fluids do not seep into any openings on 4. Use an approved disinfectant wipe to disinfect the system and the system accessories, except for the monitor screen, Touch Screen, and transducer ports 36 Unrestricted © Siemens Healthineers 2023 Speaker Notes: Instructions for cleaning the ultrasound system are as follows: 1. Power off the ultrasound system and unplug the power cord from the power supply 2. Use a clean gauze pad or lint-free cloth, lightly moistened with a mild detergent, to wipe: • Touch Screen and monitor • Control panel • Trackball and slide controls 3. After cleaning, use a clean, lint-free cloth to dry 4. Use an approved disinfectant wipe to disinfect the system and accessories, except for the monitor screen, Touch Screen, and transducer ports Tip: Ensure that fluids do not seep into any openings on the system. Notes No. 36 SIEMENS Healthineers Cleaning the trackball SIEMENS . Healthineers ... • Rotate the ring around the trackball counterclockwise and carefully lift to remove Clean the ring and trackball with a cotton swab or lint-free pad Update • moistened with a mild detergent • Clean inside the trackball assembly with a cotton swab or lint-free pad moistened with mid detergent • Use an approved disinfectant wipe to disinfect the ring, trackball, and trackball assembly • Allow the components to dry before reassembly • Place the ring over the trackball, aligning the tab with the point of attachment on the assembly, and rotate clockwise until the ring snaps back into place 37 Unrestricted © Siemens Healthineers 2023 Speaker Notes: To clean the trackball: • Rotate the ring around the trackball counterclockwise and carefully lift to remove • Clean the ring and trackball with a cotton swab or lint-free pad moistened with a mild detergent • Clean inside the trackball assembly with a cotton swab or lint-free pad moistened with mid detergent • Use an approved disinfectant wipe to disinfect the ring, trackball, and trackball assembly • Allow the components to dry before reassembly • Place the ring over the trackball, aligning the tab with the point of attachment on the assembly, and rotate clockwise until the ring snaps back into place Notes No. 37 SIEMENS Healthineers Approved disinfectant wipes SIEMENS. Healthineers ... Cleanisept Sani-Cloth Sani-Cloth Sani-Cloth Sani-cloth Sani-Cloth Super Use only approved AF AF3 Bleach HB Plus Sani-Cloth disinfectant wipes on Ultrasound ✓ ✓ ✓ ✓ ✓ ✓ ✓ surfaces of the system and system accessories, except the Transducer ✓ ✓ ✓ ✓ ✓ ✓ ✓ monitor screen and holders transducer ports. Trackball ✓ ✓ ✓ ✓ ✓ ✓ ✓ assembly ✓ = approved Gel ✓ ✓ ✓ ✓ ✓ ✓ ✓ warmer Touch ✓ ✓ ✓ ✓ ✓ ✓ ✓ NA = not approved Screen Monitor NA NA NA NA NA NA NA screen Transducer NA NA NA NA NA NA NA ports 38 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The following chart provides a list of approved disinfectant wipes to be used to clean the system. Take care to use only approved disinfectant wipes on surfaces of the system and accessories, except the monitor screen, Touch Screen, and transducer ports. Notes No. 38 SIEMENS Healthineers Cleaning the air filter SIEMENS . Healthineers ... 1. Power off the system and unplug the power supply 2. Push the air filter tray in to release the locking mechanism and pull the tray from the system 3. Rinse the air filter with running water and allow the filter to completely dry. To accelerate drying, gently shake the filter or blot with a clean, lint-free cloth 4. Slide the air filter tray back into the ultrasound system TIP Air filter should be checked and cleaned ! Inserting the air filter tray into the weekly to maintain ultrasound system while still wet can cause damage. proper system cooling 39 Unrestricted © Siemens Healthineers 2023 Speaker Notes: The system air filter should be checked and cleaned weekly to maintain proper system cooling. To clean the air filter: 1. Power off the system and unplug the power supply 2. Push the air filter tray in to release the locking mechanism and pull the tray from the system 3. Rinse the air filter with running water and allow the filter to completely dry 4. Slide the air filter tray back into the ultrasound system Do not insert the air filter tray into the ultrasound system while still wet as this can cause damage to the system. To accelerate the drying process, gently shake the filter or blot with a clean, lint-free cloth. Notes No. 39 SIEMENS Healthineers Summary SIEMENS. Healthineers ... • Review external features ACUSON Origin • Identify monitor, Control Panel, and Touch Screen • Describe transducers Origin • Review peripherals • Discuss care and cleaning C 40 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No. 40 SIEMENS Healthineers Trademarks and disclaimers The products/features mentioned in this document may not be commercially available in all countries. Due to regulatory reasons their future availability cannot be guaranteed. Please contact your local Siemens Healthineers organization for further details. ACUSON Origin is a trademarks of Siemens Medical Solutions USA, Inc. At Siemens Healthineers, our purpose is to enable healthcare providers to increase value by empowering them on their journey towards expanding precision medicine, transforming care delivery, and improving patient experience, all enabled by digitalizing healthcare. An estimated five million patients worldwide everyday benefit from our innovative technologies and services in the areas of diagnostic and therapeutic imaging, laboratory diagnostics and molecular medicine as well as digital health and enterprise services. We’re a leading medical technology company with over 120 years of experience and 18,500 patents globally. With over 50,000 employees in more than 70 countries, we’ll continue to innovate and shape the future of healthcare. Siemens Healthineers Headquarters Manufacturer Siemens Healthineers AG Siemens Medical Solutions USA, Inc. Siemensstr. 3 Ultrasound 91301 Forchheim, Germany 22010 S.E. 51st Street Phone: +49 9191 18-0 Issaquah, WA 98029, USA siemens-healthineers.com Phone: 1-888-826-9702 siemens-heathineers.com/ultrasound 41 Unrestricted © Siemens Healthineers 2023 SIEMENS Healthineers Thank you for your enthusiasm! SIEMENS . Healthineers ... Questions? 42 Unrestricted © Siemens Healthineers 2023 Speaker Notes: No speaker notes. Notes No.42