Siemens Healthineers Academy

myNeedle Guide i-Fluoro Workflow Video - USA

In this video, we will introduce to you how to perform the myNeedle Guide i-Fluoro workflow step by step.

To learn about how to prepare the required hardware components for a CT-guided interventional procedure and how to perform the myNeedle Guide 2D and 3D workflows, please watch the myNeedle Guide 2D and 3D workflow videos.

This workflow video is best viewed on either a tablet, laptop, desktop, or connected monitor. Not recommended to view on a smartphone.

Welcome to the I fluoro workflow video. In this short video you will learn how to operate the system to perform the intervention procedure with DIFLUORO scan mode. The eye Flora scan mode usually starts with the control scan step. When the needle path has been defined and the needle has been pierced into the skin, please watch the mind needle guide 2D and 3D workflow videos first to get more information about the intervention hardware preparation. The software operation on the console, as well as the mobile workflow on the tablet. With eye fluoro imaging you can combine adjustment of the needle and imaging at the same time in one step, as it can potentially lead to high X ray exposure. Both of the radiologist and the patient. Please use it only for difficult moving target procedures or when you need an instant visual feedback about the location of the needle. You need to purchase the eye Flora license to be able to use I flora mode. If all requirements are met and you decide to perform, and I Flores can select the eye fluoro scan mode, either from the console at the acquisition workplace or from the iPad in the examination room and tap go. If necessary, choose the hand care setting. Or change other scan or reconstruction parameters. Please be aware that hand care will increase the latency slightly. In the next step, position the patient table by using one of the following options. Option One, press the button, move to last scan position. The table will move to the last scan position. Option 2. Press the button, move to selected axial slice position. The table will move to the same position as the currently selected axial slice position. Option 3. Position the scan range box on the top a gram for graphical range planning. The table will move to the center of the newly defined scan range. Option four, position the patient table freely, for example by using the interventional joystick. Also called I joystick. It is even possible during active I fluoro scanning. Tap go now you can progress the needle under continuous. I fluoro while pressing the X ray foot switch or the start button for continuous scanning. Another possibility to progress the needle with short repetitive I fluoro scans is too quickly press the start button or X ray footswitch. Continuously check the updated position of the needle in the interventional 2D axial segments on the in room monitor. During active I fluoro scanning the eye floral images are displayed in the interventional 2D axial segments on the workplace and on the in room monitor but not on the tablet. As soon as scanning has stopped, the images are also displayed on the tablet and are fully operational, for example, to adjust view settings. At this point, the eye fluoro workflow is finished, the further proceeding for an interventional procedure is described in the mind needle Guide, 2D and 3D videos. Thank you for watching the eye floral workflow video.

SIEMENS SIEMENS Doe, John Doe, John Healthineers Healthineers••:•• Healthineers 8118/1988 •8118/1988 811811988 Tablet The i-FIuoro scan mode starts with SIEMENS . Healthineersx:• exposure ImGy•cm/sl ImGy/s] ImGy•cm/sl ImGy•cm/s] [mGyIsl ImGy/s] [mGy/sl DLP DLP Healthineers••."• Console (32 cm) 11.6 (32 cm) 11.6 12.2 10.4 (32 cm) 12.2 (32 cm) 10.4 12.2 10.4 10.4 11.6 procedures SIEMENS Eff. mAs rnAs Eff. mAs Use the i-FIuoro scan mode only for: CO GO G) 64 43 < Reference > 12345678 SOMATOM S OMArOM Define path is i.s syngo CT VA40A •8,918/1988 •8/18/1988 Slice [mm] Slice Slice Imml Slice [mm] Slice 3x3.o 3x3_o 3x5.0 3x3.o 3xS.O 7/202021 7/20/2021 AM TP -1018695 TP Scan-Time [sl Soan-Time [sl Son-Time [sl i •Sequence i •Sequence procedures < Reference > < Reference> CD Max SIEMENS . SIEMENS SO M ATM S OMArOM Healthineers G) Video Console (Reference> Exam Time Center 42 Define path Progress Needle Define path Path Progress N Needle Step 3: Position the Patient Table Position the Patient Table step 2: step 3: Step 4: Progress Needle -337.5 -1018.5 -1015.5 -337.5 Finalize Center Cancel GO Finalize Multiple scans at the same position Multiple at the same position Multiple att e Multiple scans at t Multiple at Multiple scans at the position Multiple scans at the posameon Multiple scans at the same Multi e scans at the same Multiple scans at the same position same Needle

  • somatom x
  • x.cite
  • excite
  • x.ceed
  • exceed
  • somotom
  • go
  • now
  • up
  • all
  • top
  • myneedle
  • myneddle
  • companion
  • guide
  • ct-guided
  • ctguided
  • intervention
  • i-fluoro
  • ifluoro
  • fluoro
  • workflow
  • va40
  • ct