MULTIX Impact family VA21C SP01 What's new

SIEMENS Healthineers MULTIX Impact and MULTIX Impact C VA21C SP01 What´s New Job Aid Template Effective Date: 10 Aug 2023| HILS 2223 Job Aid Effective Date 17 Oct 2023 | QR700001902 Unrestricted © Siemens Healthineers, 2023 Table of Contents SIEMENS Healthineers X-Ray Tube Touch User Interface (TUI) – Patient Tab 3 Rotation about Horizontal Axis (RHA) – Software Stop* 4 Auto Tracking Optimization in VA21C SP01 Update 5 Auto Thorax Collimation 6 2 Effective Date: 17 Oct 2023| QR700001902 * Option Unrestricted © Siemens Healthineers, 2023 X-Ray Tube Touch User Interface (TUI) SIEMENS Healthineers Patient Tab The angle of rotation is now displayed in degrees on the Position tab card on the TUI once you press the RHA button to rotate the tube in VA21C SP01. Henderson, Christopher Doe, John ? 19.11.1988 M 654789.345.678 ? 19.11.1988 M 654789.345.678 Hand PA Basic More Position Hand PA Basic More Position 40 1 KV 100 mAs ms Tube Ko Dose o mm Cu -- 90º 2| 115cm Current:115cm Desired: 115cm RHA:0º 1-to # 43 cm # * ACSS * # 43 cm # RHA ： Rotate about the Horizontal Axis 2| 115cm Current:115cm | Desired: 115cm RHA:90 --- to 3 Effective Date: 17 Oct 2023| QR700001902 Unrestricted © Siemens Healthineers, 2023 Rotation about Horizontal Axis (RHA) SIEMENS Healthineers Software Stop* Follow the instructions to enhance the performance of the software stop in ITI VA21C SP01. The 3D Tube stand features an auto-detent rotation. @ Doe, John ? 19.11.1988 M 654789.345.678 1. Rotate the tube unit to a position ±3° by RHA rotation button from the required detent (0° or ±90°). Hand PA 2. Remove your finger from the button. The tube unit will be rotated Basic More Position automatically to the detent. +3×43 43×35 35x35 30x25 3. Software stop is complete when notification sound is triggered. 25×20 4. To utilize a tube rotation of 1,2 or 3 degrees, press the Software Stop icon to activate the software stop. When activated, the tube will disable the automatic rotation function. Please note: • The automatic rotation will be interrupted if any other tube movement - SID 115 cm + HHO happens in the meantime. 2| 115cm [IIII Current:115cm IlIII] Desired: 115cm RHA:90º | --- DO Press the RHA button again to reactivate the function. # 43 cm # » ACSS * # 43 cm # • Ko 4 Effective Date: 17 Oct 2023| QR700001902 * Option Unrestricted © Siemens Healthineers, 2023 Auto Tracking Optimization in VA21C SP01 Update SIEMENS Healthineers The Auto Tracking function for the bucky wall stand (BWS) has been optimized in VA21C SP01. Before update (for older versions VA21B and VA21C) • Stand exam on the BWS: Regardless of whether the auto tracking was enabled in the previous exam or not, the customer needs to activate it. After update (VA21C SP01) • Stand exam on the BWS: If the previous exam was also on the BWS with auto tracking enabled, auto tracking remains activated. There are three options to check or enable auto tracking in the system: * ER_202306051026231, @ ER-20230003292 202306051026231 ? 20 WALL Basic More So 30 45 60 75" 90 TG P # Door open Deured Universal RHA: 90" 5 Effective Date: 17 Oct 2023| QR700001902 * Option Unrestricted © Siemens Healthineers, 2023 Auto Thorax Collimation SIEMENS Healthineers As of version VA21B, there is a new user setting: Auto Thorax Setting X Auto Thorax Setting > General > Use Confirm General AP / P LAT Use Confirm Yes If Use Confirm is checked, it is mandatory to click the By deselecting the checkbox, you can start the exposure Confirm button before starting the exposure. without clicking the Confirm button after collimation. ? stitch Mode Patient Sire Foam -. ANC S S 125 Dove .................... Density Cu Siter 0.0mm Static Tool End of Exam Conde Door open 14:32-21 6 Effective Date: 17 Oct 2023| QR700001902 Unrestricted © Siemens Healthineers, 2023 SIEMENS Healthineers Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens-healthineers.com 7 Effective Date: 17 Oct 2023| QR700001902 Unrestricted © Siemens Healthineers, 2023