MULTIX Impact C Smart Virtual Ortho - Auto TOD Video

Smart virtual ortho provides orthopedic acquisitions with automatic system movement. After you have defined the start and end position, the system will automatically move to the correct position for each image of the ortho sequence. To achieve a more accurate assignment of the table object distance todds the auto teody measurement for orthopedic examinations is now available with software version VA 21 and hire the new my exam. 3D camera automatically detects the dimensions of the patient's body. And sets the recommended toady accordingly. Please note smart virtual ortho with auto D is only available for standing examinations at the Bucky Wall Stand BWS for full spine and long leg examinations. Click on the auto collimation button to collimate automatically. You are still being able to manually adjust the auto collimation field in line with your individual preferences. Auto teody measurement automatically captures the table object distance to ensure accurate ortho examinations. The detected toad value will be displayed in green. Once you update the card value manually, the auto towed measurement is disabled. Confirm your selection by pressing confirm. Press the release button down fully and keep it pressed until the exposure is ended. The system automatically delivers the final composed image, so you can make sure patients get the help they need without unnecessary waiting time. The intelligent workflow system guides you through the imaging process.

202009180953251 9-18-1979 75 10 23:41:28 5.1 15 MULTIX Impact C SIEMENS Healthineers Jane Doe Examination Patient Information Patient Name: Mode ID: Other 40Y DOR: AEC Accession No .: Device Information Grid Type: No Grid Grid Status: Grid_OUT CHANGE mAs - Grid Orientation: Grid_Vertical SID: 180cm Collimator Alignment: Center Density TOD(cm): static Tool End of Exam Ready Age: Dose mAs Longspine ap2 LongSpine ap2 Patient Size mA LongSpine kV ms Confirm TOD(cm): 5.1 EMENS ineers ENS LongSpine ap3 D: Static Tool MULTIX Impoct C Tube Load 80% Tube Load Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. C Siemens Healthcare GmbH 2022