Multifunctional Wireless Footswitch - USA

Multifunctional Wireless Footswitch (Option) Job Aid CIARTIC Move The optional multifunctional wireless footswitch offers the same functions as the standard footswitch and the multifunctional wired version, such as radiation release and image storage. The following image shows the standard configuration of the multifunctional wireless footswitch. Please note that the layout and functionality assigned to the foot pedals can be configured in the Service Software and, therefore, can deviate from the standard configuration. 5 4 6 7 ((cpp)) 3 MODE 2 . MODE 1 8 No. Description No. Description 1 Left pedal 5 Rotary knob of the battery compartment Radiation release for selected operating mode 2 Battery status LED 6 MODE button Select Operating Mode 3 Connection status LED 7 Stirrup Prevents unintended actuation Use to reposition the footswitch by the foot 4 Save button 8 Right pedal Stores images or scenes Radiation release for fluoroscopy Unrestricted | Published by Siemens Healthineers AG © Siemens Healthineers AG, 2024 SIEMENS Master Template Effective Date: 21 Apr 2023 | HILS 2224 Job Aid Effective Date: 12 JUNE 2024 | QR700009669 Healthineers Job Aid | Multifunctional Wireless Footswitch (Option) Effective Date: 12 JUNE 2024 | QR700009669 States of the Status LED No. Subject Modes Battery status LED • Green: Battery full or nearly full Battery capacity • Orange: Battery almost full The battery capacity is also shown on • Orange (flashing): Battery low the Status bar on the left side of the monitor. Connection status LED • Green: Connection active Radio link or pairing mode • Orange: No connection active • Orange (flashing): Footswitch not paired • Green and orange alternately flashing: Pairing mode activated Battery status LED + • Orange (both LEDs flashing): Fatal Connection status LED system errors (for example, battery Fatal error or footswitch update exhausted or memory error) • Green and orange (both LEDs alternately flashing): Firmware update process running Unrestricted | Published by Siemens Healthineers AG © Siemens Healthineers AG, 2024 SIEMENS Master Template Effective Date: 21 Apr 2023 | HILS 2224 Job Aid Effective Date: 12 JUNE 2024 | QR700009669 Healthineers Page 2 of 7 Job Aid | Multifunctional Wireless Footswitch (Option) Effective Date: 12 JUNE 2024 | QR700009669 Switch on the Wireless Footswitch Take the wireless multifunctional footswitch out of the footswitch holder. o- Place it horizontally on the floor. This will switch on the footswitch automatically. Swivel the stirrup into the upright position until it locks. The footswitch is now ready to use. The footswitch automatically switches to standby mode if it is not used for a certain period of time. Activate it again by pressing any button or pedal. Selecting the Operating Mode Press the MODE button several times to select one of the operating modes: Single image, Fluoro, SUB, Roadmap or a video source (depending on the available operating modes). MODE Ang.0º The selected operating mode is indicated in the wGym Acquisition area and on the control panel of the C-arm 17 system. Prestous patients A confirmation sound acknowledges successful operating Fluoro Single New patient Emergency patient image Pano Sub Road DCM mode/video source switchover. You can release radiation Medium Acto Dose Metal correction Tech lock again right away. Unrestricted | Published by Siemens Healthineers AG © Siemens Healthineers AG, 2024 SIEMENS Master Template Effective Date: 21 Apr 2023 | HILS 2224 Job Aid Effective Date: 12 JUNE 2024 | QR700009669 Healthineers Page 3 of 7 Job Aid | Multifunctional Wireless Footswitch (Option) Effective Date: 12 JUNE 2024 | QR700009669 Release radiation The functionality of the pedals can be changed in the Service Software. The information provided in this document refers to the default settings. Use the right pedal to activate Fluoroscopy. MODE Keep the foot pedal pressed during radiation release. CMODE Press the left pedal to activate the currently selected operating mode. Exception: If Fluoroscopy (CFC) mode is selected, the left pedal MODE is assigned the Single Image operating mode. In this case, keep pressing the pedal until the radiation stops automatically. Store images Press the save button to store images. () woce • Last image hold (LIH): Hold the key for less than two seconds to save the image last recorded. -MODE • Last scene hold (LSH): Hold the key for more than two seconds to save the scene last recorded. The images are stored in the local database. They are transferred from the left side of the monitor to the right side of the monitor unless the Hold Reference function is active. Unrestricted | Published by Siemens Healthineers AG © Siemens Healthineers AG, 2024 SIEMENS Master Template Effective Date: 21 Apr 2023 | HILS 2224 Job Aid Effective Date: 12 JUNE 2024 | QR700009669 Healthineers Page 4 of 7 Job Aid | Multifunctional Wireless Footswitch (Option) Effective Date: 12 JUNE 2024 | QR700009669 Replace the batteries 1. To open the battery compartment, lightly press the knob and turn it counterclockwise. 2. Remove the batteries and insert 3 new batteries (battery type LR14/C-battery) into the footswitch. 3. To close the battery compartment, insert the knob into the + depressions. Press lightly and turn it until it clicks into place. + HI O Unrestricted | Published by Siemens Healthineers AG © Siemens Healthineers AG, 2024 SIEMENS Master Template Effective Date: 21 Apr 2023 | HILS 2224 Job Aid Effective Date: 12 JUNE 2024 | QR700009669 Healthineers Page 5 of 7 Job Aid | Multifunctional Wireless Footswitch (Option) Effective Date: 12 JUNE 2024 | QR700009669 Secure the Footswitch for Transport For secure storage and transportation of the footswitch, insert the footswitch into the holder on the back of the C-arm system. Ensure that the colored symbols on the footswitch are lined up with the ones on the holder to avoid inserting the wrong footswitch. O The following colored symbols are used for unique allocation of the footswitch to the holder: Unrestricted | Published by Siemens Healthineers AG © Siemens Healthineers AG, 2024 SIEMENS Master Template Effective Date: 21 Apr 2023 | HILS 2224 Job Aid Effective Date: 12 JUNE 2024 | QR700009669 Healthineers Page 6 of 7 Job Aid | Multifunctional Wireless Footswitch (Option) Effective Date: 12 JUNE 2024 | QR700009669 Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com Unrestricted | Published by Siemens Healthineers AG © Siemens Healthineers AG, 2024 SIEMENS Master Template Effective Date: 21 Apr 2023 | HILS 2224 Job Aid Effective Date: 12 JUNE 2024 | QR700009669 Healthineers Page 7 of 7