Multi-modality data loading (USA)

In this video you will learn how to load multimodality data side by side into the system. Please keep in mind that the user interface may differ slightly on different host systems. Load the patient into the application Start to load the images into the images area. Keep the left mouse button pressed to drag and drop the series for contouring into the image area. This is usually the non contrast planning CT image. A yellow frame highlights the first loaded series. You can scroll through the image by using the middle mouse wheel. In the non contrast. Series. There is no lesion visible. Load the non contouring images from the series panel into the viewing area. Right click, drag and drop and add. If the image is displayed parallel to the CT series, a lesion is visible in the Mr. By using rigid registration, the non contouring images will be automatically registered to the contouring image. Optionally use deformable registration, load the next non contouring. Images This is the CT part of the PET CT from the series panel. Then fuse it with the PET part. Hold the right mouse button pressed to drag and drop and fuse it. The loaded series are aligned to each other. Scroll through the loaded series by using the middle mouse wheel. You can zoom or pan the image. To zoom the image, go outside of the images and press the left mouse button. Two black boxes appear close to the mouse. To zoom, move the mouse up while holding down the left mouse button. Depending on the monitor and license, you can load up to four series at the same time in parallel. In addition, you can fuse four additional series in the loaded images.

1/13/2014 1/9/2014 103 350 50 384 852 8:04 30 38 300 40 100 Multi-modality data loading This training material is based on the medical devices syngo.via RT Image Suite VB80A. SIEMENS . Healthineers MM RT Image Suite AHR Series 5 IMA n.a. SP F906.0 SP F9.1 1 Planning CT 2.0 B31f t1_se_r_tra Series Name Target volumes Structure Set_1 UNAPPROVED CT. Planning CT RTIS Anatomy & Targets 1 Planning CT 2.0 B Favorite Tools Structures RPF t1 se r tra 10cm 2_t1_mpr_tra_p2_iso CT PET, PET CT RTIS New_4_AC CT Planun PET_CTAC_WB (AC) Topogram 1.0 T80s Findings Auto Registration_Copy1_Copy1 HPL 3 IMA n.a. FRM n.a. SP R3.5 SP A246.7 SP L4.6 SP A21.4 8:04 AM Patient Add Study syngo.via Scanner Al-Rad Companion Syngo Carbon View&GO Space Please keep in mind that the user interface may differ slightly from what is shown in this video. The actual usage of the tool may differ slightly on the different host systems, for example, on syngo.via, Syngo Carbon Space, syngo.via View&GO, Al-Rad Companion or on the scanner. However, the intended purpose of the tool is the same. The tool functionality defined in this video is applicable to any of the Siemens Healthineers products in which you find this tool. CT, Planning CT RTIS 1 Planning CT 2.0 B3 3_t2_tse_tra_3mm_p Please drag data from Series Navigator. CT Correct 4D Merg Create POI 3mm_p MR, MR RTIS 3 IMA n.a. FRM n. a. SP F900.0 SP A160.0 SP R5.2 SP A208.0 SP A235.7 Senes SP F904.0 W 350 CT RTIS C CT Planun C_WB (AC) Add Replace 3 IMA n. a. FRM n.a. SP F898.0 SP H29 Marking SP H12.9 TTTT Fuse (MPR/MPR) SP H28.9 SP F868.0 5 IMA ... 8:05 AM New_4_AC CT Planung Auto Registration _Copy1_Copy1 RTEngine Registration 2 IMA ... Ocm 5 IMA 5 IMA n.a New_4_AC CT Planung I PET_CTAC_WB (AC) 300 | T 56.5 kBq/ml SP R3.5 | SP R3.5 SP A246.7 | SP A246.7 a 49.00% 5 IMA .. 40 | B 00 | T 56.5 kBq/ml 40 |B 300 | T 40 1 Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Unrestricted | Published by Siemens Healthineers AG | C Siemens Healthineers AG, 2024 Siemens Healthineers HQ | Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com SIEMENS Health