MR RetroRecon Numaris X

MR RetroRecon – Numaris X Job Aid MR Retro Recon – Numaris X In the Job View, an Advanced User can use the retrospective reconstruction (RetroRecon) of a measurement to repeat a reconstruction with a different parameter setting without restarting the actual scan. Note: RetroRecon should only be performed by experienced users. Job View Message after RetroRecon: Please take care that all results created with RetroRecon might not be suited for diagnostic use any more. Results need to be checked carefully. Parameter changes are not checked for consistency hence preparation or reconstruction errors might occur. 1. On the access bar, click the Job View icon. 2. In the job type control area, select MR Reconstruction. Job View Short Term Storage Maintenance Data Publisher MR Reconstructions Media Network Print Workflows 3. Overview of all protocols displayed. Job View Short Term Storage Maintenance MeasUic Protocol Name Patient Name Time Progress Raidfile Status Action Data Publisher MR Reconstructions AAShoulder Scout 12/12/2022 1:45:07 PM OK Media 11 HISTO_bh xxxxxxxxxxxxxxxxxxxxxxxxxxx 12/8/2022 5:07:05 PM OK Network 10 vibe q-dixon_tra_bh 12/8/2022 5:05:54 PM OK Print t1 vibe dixon cor bh_post xxxxxxxxxxxxxxxx,XXXXXXXX 12/8/2022 5:02:24 PM OK Workflows t1_vibe dixon tra bh venous xxxxxxxxxxxxxxxxxxxxxxx,xxxxxxxx 12/8/2022 5:01:30 PM OK t1 vibe dixon_tra bh_venous 12/8/2022 5:00:54 PM OK t1 vibe dixon tra bh arterial 12/8/2022 5:00:11 PM OK t1_vibe e-dixon tra bh_pre 12/8/2022 4:50:29 PM OK localizer bh xxxxxxxxxxxxxxxxxxxxxx,xxxxxxxxxx 12/8/2022 4:46:51 PM OK SIEMENS Healthineers 4. Search and select a Sequence, then click the Edit icon to edit the corresponding protocol. leasUid Protocol Name Patient Name Time Progress Raidfile Status Action 1 AAhead_scout 1/30/2023 5:18:11 PM OK AAShoulder_Scout xxxxxxxxxxxxxxxxxxxxxx 12/12/2022 1:45:07 PM OK HISTO bh XXXXXXXXXXXXXXXX XXXXXXXX 12/8/2022 5:07:05 PM OK 10 vibe_q-dixon_tra_bh xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1 2/8/2022 5:05:54 PM OK 9 t1_vibe dixon_cor_bh_post xxxxxxxxxxxxxxxxxxxxxxxx 12/8/2022 5:02:24 PM OK t1_vibe_dixon_tra_bh_venous xxxxxxxxxxxxxxxxxxxxxxxxxxx 12/8/2022 5:01:30 PM OK t1_vibe_dixon_tra_bh_venous 12/8/2022 5:00:54 PM OK t1_vibe_dixon_tra_bh_arterial xxxxxxxxxxxxxxxxxxxx,xxxxxxxx 12/8/2022 5:00:11 PM OK t1_vibe_e-dixon_tra_bh_pre xxxxxxxxxxxxxxxxxxxxxxxxXXX 12/8/2022 4:50:29 PM OK localizer_bh xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 12/8/2022 4:46:51 PM OK Action Edit Protocol for RetroRecon 5. Edit Protocol for Retrospective Reconstruction screen opens. Select a Parameter Card (i.e., similar to the parameter card in the scan queue) and make necessary parameter adjustments. a. Click the Add icon. b. Click the Start icon to start the Retro Reconstruction. A new image labeled RR will be loaded into the Patient Browser. MeasUid Protocol Name Patient Name Time + Progress Raidfile Status Action 10 vibe_q-dixon tra_bh xxxxxxxxxxxxxxxxxxxxx,xxxxxxxx 12/8/2022 5:05:54 PM OK Edit Protocol for Retrospective Reconstruction Routine Resolution Geometry System Physio Inline Sequence Slab Group 1 FOV Read 450 mm Parameters Slabs FoV Phase 75.0 ¢ % Slices per Slab 52 Slice Thickness 3.5 mm Common Distance Factor 20 + TR 9.1 + ms DICOM HEADER Position R2.9 A92.0 H16.8 TE 1 1.30 - ms IRIS Orientation Transversal Averages MEAS Phase Encoding Dir. A>> P ... Concatenations SPICE Phase Oversampling AutoAlign YAPS Slice Oversampling 53.8 % % Coil Elements BC Presets S BIFILTER S COILCOMBINEMODE Parameter Name Original Current S DISABLEOPENRECON S DISTORTIONCORRECTIONFILTER S DIXONSWAP S DYNAMICDISTORTIONCORRECTIONFILTER Please take care that all results created with RetroRecon might not be suited for diagnostic use any more. Results need to be checked carefully. Parameter changes are not checked for consistency hence preparation or reconstruction errors might occur. encel Server Status online Raid Status online USB Drive not present SIEMENS Healthineers Page 2 of 4 6. For Advanced Users, follow the steps below to use to options in the left menu. a. In the Parameters list, select a parameter and click the Add icon. b. In the Presets list, select a preset and click the Add icon. c. Once all parameters and presets are selected, Click the Start icon to start retrospective reconstruction. d. Click the Save icon to save the selected parameters and presets. e. In the Progress column in the overview, the status of the retrospective reconstruction is displayed as Done. Progress Raidfile Status Action 1 10% 00:00:09 In Use BOX Progress Raidfile Status done OK f. A new image labeled RR will be loaded into the Patient Browser. SIEMENS Healthineers Page 3 of 4 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters Local Contact Information Legal Manufacturer Siemens Healthcare GmbH Siemens Medical Solutions USA, Inc. Imaging & Therapy Systems Henkestr. 127 91052 Erlangen, Germany 40 Liberty Blvd. Magnetic Resonance Phone: +49 9131 84-0 Malvern, PA, USA 19355-9998 Henkestr. 127 siemens-healthineers.com Telephone: +1-888-826-9702 DE-91052 Erlangen, Germany siemens.com/healthcare Telephone: +49 9191 18-0 siemens.com/healthcare Unrestricted | Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2022 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: 3/9/2023 | HOOD05162003338799 Healthineers Page 4 of 4