Movement Safety - USA

As the operator, you must take care to avoid collisions when moving the mobile C ARM system. Use the system only if you can observe the patient and other persons during movement. Do not position the system on inclined surfaces greater than five degrees. The C ARM system is equipped with collision detectors. If a collision is detected, all movements are stopped. The Lidar sensor will detect objects straight ahead and will slow down the system. The collision indicator on the panel will indicate if the system detects a collision. You will have to slowly move the system out of the collision or remove the object in the path of the system after a detected collision. You can only move the C arm system out of the collision site at reduced speed. Please note, if you operate the C arm in standalone mode and a collision is detected, you need to plug in the monitor trolley to find out where the collision occurred. When you use the hand control to operate the system, always make sure that the path of movement is free from obstructions. Observe the movement path of the C arm system continuously. When you are using the store positions feature of the system, the system is going to drive in a direct way. The system might use a different path every time in case of an emergency, and if motorized movements are not possible, use the rescue button to move the C arm. To do so, continuously press the rescue button to move the C arm system to the desired position. You will need a greater amount of force to move the system. In this case you might need more than one operator.

120 90 Movement Safety 3D SIEMENS GO Healthineers CIARTIC Move LASER Please note this learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. will be liable for damages. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of utility model or design, are reserved. Unrestricted | Published by Siemens Healthineers AG | C Siemens Healthineers AG, 2024 Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com Hea