MOBILETT Impact – Step 7: Select OGP and adjust acquisition parameters simulation

Continue Continue Continue Continue Continue Welcome and Introduction ? Access Point Scheduler (7 min) Access Point Examination Mode (6 min) MOBILETT Impact Standard Clinical Workflow Chest Examination Step 7: Select OGP and Adjust Acquisition Parameters Simulation You have entered patient data for a new patient or an already examined patient (access point Scheduler). Or you have opened a patient from the Worklist or registered an emergency patient (access point Examination mode). Now it is time to select an Organ Program (OGP), add further exam information and adjust acquisition parameters. Use the arrows to navigate to a simulation of your choice. You can perform both of the simulations or choose a specific one. If you need help for navigating through the simulation, click this button. Welcome and Introduction [Storyboard_MOBILETT_Impact_Step_7_Sel_OGP_01.wav] You have entered patient data for a new patient or an already examined patient (access point Scheduler). Or you have opened a patient from the Worklist or registered an emergency patient (access point Examination mode). Now it is time to select an Organ Program (OGP), add further exam information and adjust acquisition parameters. Use the arrows to navigate to a simulation of your choice. You can perform both of the simulations or choose a specific one. If you need help for navigating through the simulation, click this button. Access Point Scheduler You have entered patient data for a new patient or modified patient data when registering an already examined patient on the Patient Registration tab of the Scheduler. You will now learn how to proceed with the further tabs OGP, Exam Information, and Institution in this simulation (7 min). Practice ? To start the simulation, select Practice. Access Point Scheduler [Storyboard_MOBILETT_Impact_Step_7_a_Sel_OGP_01.wav] You have entered patient data for a new patient or modified patient data when registering an already examined patient on the Patient Registration tab of the Scheduler. You will now learn how to proceed with the further tabs OGP, Exam Information, and Institution in this simulation. To start the simulation, select Practice. Access Point Examination Mode You have opened a patient from the Worklist by selecting the Exam button or registered an emergency patient which automatically leads you to the Examination mode. You will now learn how to select and assign an OGP to your study and to adjust acquisition parameters in the Examination mode prior to the actual examination (6 min). Practice ? To start the simulation, select Practice. Access Point Examination Mode [Storyboard_MOBILETT_Impact_Step_7_b_Sel_OGP_01.wav] You have opened a patient from the Worklist by selecting the Exam button or registered an emergency patient which automatically leads you to the Examination mode. You will now learn how to select and assign an OGP to your study and to adjust acquisition parameters in the Examination mode prior to the actual examination. To start the simulation, select Practice. Disclaimer Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2023 Siemens Healthineers Headquarters\Siemens Healthcare GmbH\Henkestr. 127\ 91052 Erlangen, Germany\Telephone: +49 9131 84-0\siemens-healthineers.com ? Disclaimer Access Point Scheduler 10:40 2022/10/10 Select the OGP tab to continue. Select the OGP Tab [Storyboard_MOBILETT_Impact_Step_7a_01.wav] You have entered all relevant demographic patient data of a new patient. You would now like to assign an organ program (OGP) to this patient. Select the OGP tab to continue. Please select the OGP tab to continue. Select Chest to continue. 10:40 2022/10/10 Select OGP Select the Body Region [Storyboard_MOBILETT_Impact_Step_7a_02.wav] The screen displayed is split into three areas: The left column with body region names and an illustration of the skeleton. The middle column with Available OGPs. And the right column with Assigned OGPs. Let’s say we’d like to perform a Chest AP supine exam for our patient. You can either select the body region name Chest on the left or select the chest on the illustration. Select the body region name Chest to continue. Please select Chest to continue. Select the + icon of Chest Lying Position to continue. 10:40 2022/10/10 Select from Available OGPs [Storyboard_MOBILETT_Impact_Step_7a_03.wav] The selected body region gets highlighted on the illustration and available OGPs for this body region get listed in the middle column. You can scroll through this list by swiping up and down with your finger on the interactive touch screen. Select the plus icon of Chest Lying Position to assign the OGP to this patient. Please select the + icon of Chest Lying Position to continue. Select the tab Exam Information to continue. 10:41 2022/10/10 Select the Exam Information Tab [Storyboard_MOBILETT_Impact_Step_7a_04.wav] The OGP appears in the list of assigned OGPs. If you would like to perform a second plane exam, for example a lateral chest exam, simply add it to the list of assigned OGPs by selecting the plus icon. Furthermore, you can delete an assigned OGP by simply selecting the cross to the right of its entry. You are now ready to continue with the next tab Exam Information. Please select the tab Exam Information to continue. Select the field Accession Number to continue. 10:41 2022/10/10 Enter / Modify / Delete Exam Information [Storyboard_MOBILETT_Impact_Step_7a_05.wav] The Exam Information tab opens. Here you can enter, modify or delete required exam information. To delete an entry, select the corresponding field. Please select the field Accession Number to continue. Select the tab Institution to continue. 10:41 2022/10/10 Select the Institution Tab [Storyboard_MOBILETT_Impact_Step_7a_06.wav] The selected field gets highlighted. By selecting the cross in the selected field, you can delete its entry. In our example, we keep these fields as they are and continue with the last tab Institution. Please select the tab Institution to continue. Select Exam to continue. 10:42 2022/10/10 Enter / Modify / Delete Institution Information [Storyboard_MOBILETT_Impact_Step_7a_07.wav] The Institution tab opens. By selecting the single fields, here you can enter, modify or delete required data about your institution, such as name and address of your institution, performing, referring or requesting physician, and when you scroll down by swiping with your finger you can enter the operator and ward of your institution. In our example, we keep these fields as they are. You are now all set to adjust acquisition parameters for your patient in the Examination mode. Select Exam to continue. Please select Exam to continue. 10:42 2022/10/10 Select the fold-out arrow to continue. Adjust Acquisition Parameters in the Examination Mode [Storyboard_MOBILETT_Impact_Step_7a_08.wav] The Examination mode opens. In this mode, your clinical workflow is displayed in the workflow area in the top left corner. The previously assigned OGP is displayed on the top of the workflow area and on top of the parameters and tools area. After selecting the assigned OGP, you can still change it or add further OGPs in the same way you did before. You can fold out the workflow area and the parameters and tools area according to your preference by selecting the corresponding arrow icon. Let’s fold out the parameters and tools area to adjust acquisition parameters. Select the fold-out arrow to continue. Please select the fold-out arrow to continue. Select Patient Size to continue. 10:42 2022/10/10 Adjust Acquisition Parameters Check or Correct the Patient Size [Storyboard_MOBILETT_Impact_Step_7a_09.wav] The parameters and tools area is folded out. For an examination, you mainly check or correct Patient Size and Acquisition Type and adjust the kV and mAs values to your needs. Select Patient Size to unfold its drop-down list. Please select Patient Size to continue. Select Patient Size M to continue. 10:42 2022/10/10 Check or Correct the Patient Size 2 [Storyboard_MOBILETT_Impact_Step_7a_10.wav] The drop-down list appears. Let’s keep the patient size as is. Select Patient Size M to continue. Please select Patient Size M to continue. Select the Acquisition Type field to continue. 10:42 2022/10/10 Check or Correct the Acquisition Type [Storyboard_MOBILETT_Impact_Step_7a_11.wav] You may have to change the Acquisition Type. The Acquisition Type indicates the detector or workstation to use for the acquisition. The available detectors depend on the detectors assigned to the system. Select the Acquisition Type field to unfold its drop-down list. Please select the Acquisition Type field to continue. Select Free to continue. 10:42 2022/10/10 Check or Correct the Acquisition Type 2 [Storyboard_MOBILETT_Impact_Step_7a_12.wav] The drop-down list appears. The available detectors depend on the detectors assigned to the system. In our example, the Cassette mode and two free exposure modes for acquisitions with two different mobile detectors are selectable. The icons also symbolize the selected mobile detector, here the Max Wi-D and the Max mini detector. Select Free to keep and confirm this selection for the acquisition. Please select Free to continue. 10:43 2022/10/10 Adjust kV Value [Storyboard_MOBILETT_Impact_Step_7a_13.wav] Using the plus or minus icon, you can increase or decrease the tube voltage value to your needs. Let’s keep this value at 85 kV for our example. 10:43 2022/10/10 Adjust mAs Value [Storyboard_MOBILETT_Impact_Step_7a_14.wav] Again, when you use the plus or minus icon, you can also increase or decrease the mAs value, the product of tube current and exposure time to use for the acquisition. Let’s keep this value at 3.2 mAs for our example. 10:43 2022/10/10 Select the kV value to continue. Adjust values from value list [Storyboard_MOBILETT_Impact_Step_7a_15.wav] Another way to adjust kV and mAs values is to select them from a scrollable list. To open this list, simply select the value directly. Please select the kV value to continue. Select the value 85 to continue. 10:06 2022/10/14 10:43 2022/10/10 Adjust values from value list 2 [Storyboard_MOBILETT_Impact_Step_7a_16.wav] A scrollable list of available values appears. On the real system, you can scroll through this list by swiping your finger up or down. To scroll through the list value by value, simply select the up and down arrows. Select the value 85 to confirm and close the list. Please select the value 85 to continue. 10:44 2022/10/10 Congratulations! You have successfully completed the simulation. Click Retry to try the simulation again. To go back to the simulation overview, click Overview. Select Next to read the Disclaimer and exit the learning activity. Retry Overview Next Imaging Software All Set for Examination [Storyboard_MOBILETT_Impact_Step_7a_17.wav] From an imaging software perspective, you are now all set to perform the examination of your patient. Congratulations! You have successfully completed the simulation. Click Retry to try the simulation again. To go back to the simulation overview, click Overview. Select Next to read the Disclaimer and exit the learning activity. Instructions Select the icon above to open the table of contents. Click Next to continue. Next Welcome Slide The timeline displays the slide progression. Slide the orange bar backwards to rewind the timeline. Click X in the top right corner to continue. Timeline Access Point Examination Mode Select the active OGP to continue and change it. 10:30 2022/10/27 trainee Select the OGP - Workflow Area Folded in [Storyboard_MOBILETT_Impact_Step_7b_01.wav] In the Examination mode, you select the OGP from the workflow area. The currently assigned OGP is displayed on the top of the workflow area and on top of the parameters and tools area. Select the active OGP to continue and change it. Please select the OGP to continue and change it. Select the fold-out arrow to proceed. trainee 10:30 2022/10/27 Fold out the Workflow Area [Storyboard_MOBILETT_Impact_Step_7b_02.wav] The drop-down list appears. This layout shows the workflow area folded in. According to your preference, you can also fold out the workflow area and select a drop-down list item there. Select the fold-out arrow to expand the workflow area. Please select the fold-out arrow to continue. Select Edit OGP to add an OGP. 10:31 2022/10/27 trainee Select the OGP - Workflow Area Folded out [Storyboard_MOBILETT_Impact_Step_7b_03.wav] The workflow area is folded out and the same list items appear. Select Edit OGP to add an OGP. Please select Edit OGP to continue. Select Chest to continue. 10:31 2022/10/27 Select OGP trainee Select the Body Region [Storyboard_MOBILETT_Impact_Step_7b_04.wav] The screen displayed is split into three areas: The left column with body region names and an illustration of the skeleton. The middle column with Available OGPs. And the right column with assigned OGPs. Let’s say we’d like to perform a Chest AP supine exam for our patient. You can either select the body region name Chest on the left or select the chest on the illustration. Select the body region name Chest to continue. Please select Chest to continue. Select Chest Lying Position to proceed. 10:31 2022/10/27 trainee Select from Available OGPs [Storyboard_MOBILETT_Impact_Step_7b_05.wav] The selected body region gets highlighted on the illustration and available OGPs for this body region get listed in the middle column. You can scroll through this list by swiping up and down with your finger on the interactive touch screen. Select Chest Lying Position from the available OGPs to unfold the OGP. Please select Chest Lying Position to continue. Select the plus icon to continue. 10:31 2022/10/27 trainee Add OGP to Assigned OGPs [Storyboard_MOBILETT_Impact_Step_7b_06.wav] Then select the plus icon to add the Chest A.P. Lying Position OGP to the assigned OGPs. Please select the plus icon to continue. Select OK to continue. trainee 10:31 2022/10/27 Select OK to Confirm OGP [Storyboard_MOBILETT_Impact_Step_7b_07.wav] The OGP appears in the list of assigned OGPs. The OGP added last to the assigned OGPs will be the one selected for your exam after confirming with OK. Select OK to confirm. Please select OK to continue. Select OK to continue. 10:31 2022/10/27 trainee Back in Examination Mode [Storyboard_MOBILETT_Impact_Step_7b_08.wav] You turn back to the screen of the Examination mode. The selected OGP now gets displayed on the top of the workflow area and the parameters and tools area. In our case, the change of the selected OGP required a change of the detector. This is indicated by the changed Acquisition Type in the parameters and tools area – in our example from Cassette to Free – and by an additional notification on the screen. Select OK to close the notification. Please select OK to continue. Select the fold-out arrow to continue. 10:32 2022/10/27 trainee Fold out the Parameters and Tools Area [Storyboard_MOBILETT_Impact_Step_7b_09.wav] Just like the workflow area, you can fold out the parameters and tools area according to your preference. Let’s fold it out to adjust acquisition parameters. Select the fold-out arrow to continue. Please select the fold-out arrow to continue. Select Patient Size to continue. 10:32 2022/10/27 trainee Adjust Acquisition Parameters Check or Correct the Patient Size [Storyboard_MOBILETT_Impact_Step_7b_10.wav] The parameters and tools area is folded out. For an examination, you mainly check or correct Patient Size and Acquisition Type and adjust the kV and mAs values to your needs. Let’s assume our patient has a Patient Size M. Select Patient Size to unfold its drop-down list. Please select Patient Size to continue. Select Patient Size M to continue. 10:32 2022/10/27 trainee Check or Correct the Patient Size 2 [Storyboard_MOBILETT_Impact_Step_7b_11.wav] The drop-down list appears. Select Patient Size M to continue. Please select Patient Size M to continue. Select the Acquisition Type field to continue. 10:32 2022/10/27 trainee Check or Correct the Acquisition Type [Storyboard_MOBILETT_Impact_Step_7b_13.wav] You may have to change the Acquisition Type. The Acquisition Type indicates the detector or workstation to use for the acquisition. The available detectors depend on the detectors assigned to the system. Select the Acquisition Type field to unfold its drop-down list. Please select the Acquisition Type field to continue. Select Free to continue. 10:32 2022/10/27 trainee Check or Correct the Acquisition Type 2 [Storyboard_MOBILETT_Impact_Step_7b_14.wav] The drop-down list appears. The available detectors depend on the detectors assigned to the system. In our example, the Cassette mode and two free exposure modes for acquisitions with two different mobile detectors are selectable. The icons also symbolize the selected mobile detector, here the Max Wi-D and the Max mini detector. Select Free to keep and confirm this selection for the acquisition. Please select Free to continue. Select the + icon to continue. 10:33 2022/10/27 trainee Adjust kV Value [Storyboard_MOBILETT_Impact_Step_7b_15.wav] You can adjust the tube voltage value to your needs. Let’s say you would like to perform the acquisition with 85 kV. Select the plus icon as many times as you need to increase and reach 85 kV. Please select the + icon to continue. Select the + icon to continue. 10:33 2022/10/27 trainee Adjust tube voltage 2 [Storyboard_MOBILETT_Impact_Step_7b_16.wav] Please select the + icon to continue. Select the + icon to continue. 10:33 2022/10/27 trainee Adjust tube voltage 3 [Storyboard_MOBILETT_Impact_Step_7b_17.wav] Please select the + icon to continue. Select the + icon to continue. 10:33 2022/10/27 trainee Adjust tube voltage 4 [Storyboard_MOBILETT_Impact_Step_7b_18.wav] Please select the + icon to continue. Select the + icon to continue. 10:33 2022/10/27 trainee Adjust tube voltage 5 [Storyboard_MOBILETT_Impact_Step_7b_19.wav] Please select the + icon to continue. 10:33 2022/10/27 trainee Adjust mAs Value [Storyboard_MOBILETT_Impact_Step_7b_20.wav] Using the plus or minus icon, you can also adjust the mAs value, the product of tube current and exposure time to use for the acquisition. Let’s keep this value at 3.2 mAs for our example. 10:33 2022/10/27 trainee Select the kV value to continue. Adjust values from value list [Storyboard_MOBILETT_Impact_Step_7b_21.wav] Another way to adjust kV and mAs values is to select them from a scrollable list. To open this list, simply select the value directly. Please select the kV value to continue. Select the value 85 to continue. 10:06 2022/10/14 trainee 10:33 2022/10/27 Adjust values from value list 2 [Storyboard_MOBILETT_Impact_Step_7b_22.wav] A scrollable list of available values appears. On the real system, you can scroll through this list by swiping your finger up or down. To scroll through the list value by value, simply select the up and down arrows. Select the value 85 to confirm and close the list. Please select the value 85 to continue. trainee Congratulations! You have successfully completed the simulation. Click Retry to try the simulation again. To go back to the simulation overview, click Overview. Select Next to read the Disclaimer and exit the learning activity. Retry Overview Next 10:34 2022/10/27 Imaging Software All Set for Examination [Storyboard_MOBILETT_Impact_Step_7b_23.wav] From an imaging software perspective, you are now all set to perform the examination of your patient. Congratulations! You have successfully completed the simulation. Click Retry to try the simulation again. To go back to the simulation overview, click Overview. Select Next to read the Disclaimer and exit the learning activity. Question Bank 1 HOOD05162003314881 | Effective Date: 31 Mar 2023 1.1 Welcome and Introduction 1.2 Access Point Scheduler 2.1 Select the OGP Tab 2.2 Select the Body Region 2.3 Select from Available OGPs 2.4 Select the Exam Information Tab 2.5 Enter / Modify / Delete Exam Information 2.6 Select the Institution Tab 2.7 Enter / Modify / Delete Institution Information 2.8 Adjust Acquisition Parameters in the Examination Mode 2.9 Check or Correct the Patient Size 2.11 Check or Correct the Acquisition Type 2.13 Adjust kV Value 2.14 Adjust mAs Value 2.17 Imaging Software All Set for Examination 1.3 Access Point Examination Mode 4.1 Select the OGP - Workflow Area Folded in 4.2 Fold out the Workflow Area 4.3 Select the OGP - Workflow Area Folded out 4.4 Select the Body Region 4.5 Select from Available OGPs 4.6 Add OGP to Assigned OGPs 4.7 Select OK to Confirm OGP 4.8 Back in Examination Mode 4.9 Fold out the Parameters and Tools Area 4.10 Check or Correct the Patient Size 4.12 Check or Correct the Acquisition Type 4.14 Adjust kV Value 4.19 Adjust mAs Value 4.22 Imaging Software All Set for Examination 1.4 Disclaimer