Knee Autopilot | Workflow Demonstration XA50

After registering a patient for a knee autopilot examination, click on exam and a new patient tab will open. Your workflow is automatically loaded into the work line. Click on start to start the auto Align Scout localizer. When a step is running, you can check the remaining scan time in the step icon. Once the auto Align Scout has finished, the needle will move to the check image quality step. Before proceeding you need to check the image quality. Click the auto Align Scout step to review the localizer images in all orientations. During the review, an orange badge indicates that an action is needed in the check image quality step to proceed with the examination. After checking the auto Align Scout, click on the step check image quality. Click on continue to proceed with the examination. The remaining steps will start being scanned. In the work line, you can always see the current step as well as how much time is left for the single step and for the whole exam. As soon as a scanning step is completed, you can click on it to check the image quality and decide if certain steps need to be repeated or not. Once all steps are completed, the check image quality step opens. Finished checking the scanned images and then go back to the check image quality step. Click on continue to move to the summary step. On the summary page you can select the images that you want to distribute. Then select the network node you want to send the images to and click on send. Once you've finished the distribution, click on close to finalize the examination.

139078 11/19/1966 90390 55 6:02 4:15 14:15 5:06 0:32 4:31 00:04 0:05 0:04 00:03 0:03 00:02 56/112 1672 2022 908 1746 743 184 824 12/25 1849 191 1937 864 14/34 313 1610 17/33 Siemens Healthineers presents Knee Autopilot Workflow Demonstration SIEMENS Healthineers Scheduler Program Selection Patient Registration Doe, Jane Medical Information Examination Information Patients (2 result(s), 4:46:17 PM) Scheduled, Today Doe Procedure Last Name Admitting Diagnosis Accession Nr. Patien Date and Time First Name Doe, James *11/19/2003, Male Alerts Study Description knee Knee Autopilot Study Comment Middle Name Medical Alerts Date of Birth Allergies Year(s) Female Height in Institution U.S. Institution Name Performing Physician Referring Physician Load Program to Queue Operator RF Transmit Mode Body Part and Laterality Patient Orientation | Safety relevant information needs to be validated and confirmed Cancel Delete Local Data Prior Studies Exam 6:04:16 PM Waiting for scan instructions. Jane Study Description knee Knee Autopilot Head First Feet First Supine Prone Right Lateral Select Any Polarization Left Feet First Supine Req. Proc. ID * 11/19/1966 F 139078 AAKnee_Scout Scan Time 0:32 min No images available yet Knee Autopilot | Standard | 30:43 Remnaining Time Start SAR Stimu NM Check Image pd_tse_sag Summary Quality Preparation EN Stop Scanning Repeat Step Image reconstruction Check previous scan steps and press "Continue" to proceed with the Continue Check Image Qua ... Stimu NM Series Anatomic regions were detected successfully Reset Rotate CW Zoom / Pan 10cm Anatomic detected 5cm examination. pd_tse_fs_tra 6:02 min Rotate CW Zoom I Pan 5:49 min Knee Autopilot | Standard 4:15 min t2_tse_fs_sag 6:39 min - Select / Deselect all Series Send Send To Print Printer is in status Error Paper Size Print Layout 36 film sheet(s) will be printed Close Printer First Name Jane 55 Year(s) Weight Requesting Physician Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthcare GmbH 2022