IQ·SPECT Workflow on the Symbia Pro.specta™ Video

05 05/22 05/22/1 05/22/18 05/22/19 05/22/1985 6:38 99 100 137 227 07:43 07:17 Siemens Healthineers presents IQSPECT Workflow meduser Scheduler Emergency Register Search by Name, ID, DoB, Description, Procedure Date, Acc No. and Modality (C Patient Patients Scheduled, Today (0 result(s), 5:01:31 AM) Procedure Date and Time 6:37 AM Register the patient. EN Patient Registration Create a new entry in the Patient List Medical Information Exam Information Last Name Admitting Diagnosis First Name Requested Procedure Title Description 01/28/2021, 06:37 Alerts Accession No Middle Name Medical Alerts ID Patient ID Comments * Date of Birth Allergies Age Sex Height Weight Save Cancel Delete Local Data Prior Studies Exam Patient Patient Year(s) in Doe Enter the Last Name, Patient ID, Date of Birth, and Weight. Doe, Jane Jane Suffix 2021.01.28-06:37:36-STD-1.3. | Safety relevant information needs to be validated and confirmed *Mandatory information MM/dd/yyyy 20 Month(s) 35 Year(s) 05/22/1985 MM/dd/yyyy SIEMENS . Click Exam to select the protocol. Last Name Doe First Name Jane * 05/22/1985 (35) 2021.01.28-06.37:36-ST ... Starting Application ... Protocol Protocol Selection Protocol Parameters Browse Protocols CT Protocols NM Protocols Physiological Signal Save at Scan LCG Demo Reconstruction Patient Type Close Contrast Protocol Adult Child Trauma NM Basic NM Dual Isotope NM NEMA Select protocol OK Add Replace Protocol: Gastric Emptying Statics [factory] -Indications: -Scan modes: StaticPlanar, StaticPlanar, Immediate StaticPlanar, StaticPlanar, StaticPlanar 60 Min Delay 120 Min Delay 240 Min Delay Protocol: Cardiac Dynamic Planar [factory] -Scan modes: CardiacDynamicPlanar Dynamic Protocol: Dynamic with Static Planar [factory] -Scan modes: DynamicPlanar Protocol: Cardiac IQSPECT [factory] Apply protocol Scan modes: SzCardiacCentricTomo Protocol: Thyroid Uptake Syringe [factory] Select the IQSPECT protocol and click Add. all 6:38 AM Patient position Healthineers Position the patient on the patient table with arms above their head. Raise the patient table to the scan height. Position the patient under the detectors. Patient registered 0.0 0.0 Tomo Feet First - Suplne (FFS) Set focus In p-scope Tc-99m Drag the box to center it over the heart. Move To Focus SZ Press Move to focus the detectors on the heart. Press Go then Move to move the system to the start position. Press Start to begin the scan. The dectectors will adjust to keep the heart in the center of the field of view. SYMBIA Pro.specta hen th the When the scan is complete, press the Unload button to remove the patient. retra The detectors will retract and the patient table move out and down. ENS neers IMENS ress the Press the Reset button to return the MENS detectors and bed to the starting position. SIEMENS . Z Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. C Siemens Healthcare GmbH 2022 Healt