High-load Patient Table for MAGNETOM Free.Max - USA

SIEMENS Healthineers MAGNETOM Free.Max High-load Patient Table Version 2022.03 Template Effective Date: 10 Aug 2021| HILS 2223 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022 High-load Patient Table SIEMENS Healthineers Table of Contents High-load Patient Table Characteristics 3 Table Handling 4 User Hints: Patient Special Care 5 User Hints: Table Movements 7 User Hints: Emergency Release 8 2 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022 MAGNETOM Free.Max SIEMENS Healthineers High-load Patient Table Characteristics A High-load Patient Table option is available, for MAGNETOM Free.Max. This High-load Patient Table is a variant of the standard table with horizontal and vertical drive that supports a higher patient load to further increase accessibility for larger patients. The patient table characteristics are listed below: Feature Value Maximum weight capacity for vertical and 320 kg (705 lbs) horizontal table movement Maximum patient weight for effective 300 kg (660 lbs) operation of vertical and horizontal table movement Minimum height of patient table when 48.5 cm lowered Maximum table scan range 140 cm 3 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022 High-load Patient Table SIEMENS Healthineers Table Handling The handling and use of the High-load Patient Table is equivalent to the normal patient table with vertical drive. Exceptions: • Maximum patient table weight. The table use does not differ from the vertical drive or fixed patient + table. ... kg VI • Table movements are managed by the jog wheel and Select&GO panel. Please note: The maximum allowed • Patient and coil positions are the same. weight for the table is always The maximal scan range, vertical and horizontal movement located on the patient table. range and speed are the same as the standard table. 4 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022 High-load Patient Table SIEMENS Healthineers User Hints: Patient Special Care Prior to the examination, after the measurement, or in SIEMENS . Healthineers case of emergency, take additional care with patients needing additional assistance (e.g., children, limited mobility, or large patients). When possible, use the vertical drive to lower the table to the minimum. This makes it easier for limited mobility patients to move on and off the table. Pay special attention when the patient table is lowered and when the patient moves off the table and leaves the examination room. 5 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022 High-load Patient Table SIEMENS Healthineers User Hints: Table Movements Risk of collision may increase when moving the patient table with compromised patients (e.g., children, sedated patients, anxious, and larger patients). CAUTION Avoid collisions when moving compromised patients: • Take additional care when moving the patient table in and out of the magnet to avoid any injury to the patient • Carefully move the patient table in and out of the bore • Don‘t use the automatic table move function • Move the patient table slowly using the jog wheel and monitor the patient during any table movement For larger patients, ensure the patient is positioned at least 5 mm from the SIEMENS Healthinters magnet tunnel. 6 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022 High-load Patient Table SIEMENS Healthineers User Hints: Emergency Release In case of emergency, you will need to use additional force to pull the heavy load patient table out of the bore compared to the standard patient table. In case of an emergency system failure when scanning larger patients, it is recommended to use two people to - or - remove the patient from the bore and examination room. 2 x person Emergency table release procedures for the high load table are the same as for the standard patient table. 7 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022 SIEMENS Healthineers Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. © Siemens Healthcare GmbH 2022 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens-healthineers.com 8 Effective Date: 09 Aug, 2022| HOOD05162003294634 Unrestricted © Siemens Healthineers, 2022