Hand/Wrist Exam | Position Patient

In this video you will learn how to position the patient for a hand or wrist examination in Superman position before performing the examination, register the patient fill in the required data and select the program. The preferred orientation for hand and wrist examinations is Superman position. Use this position whenever the condition of the patient allows it. To examine the patient in Superman position, position the patient in prone position. Head first with the arm to be examined, stretched above the head. Position the region to be examined in the center of the coil. Use cushions to increase the distance between the body part and the coil to avoid artifacts and burnouts. Wrap the coil around the patient's hand or wrist. It is important to wrap the coil in a circular way. Instead of bending it flat, fixed the coil with a strap to keep it correctly wrapped, you sandbags or a wedge to elevate the hand from the table and use additional fixing straps to ensure a stable position. Keep in mind to place the region to be examined at the center of the table and not close to the table end. Check again that you position the patient safely and provide the alarm ball for communication. Check the position of the coil on the ruler. Enter the manual ISO input at the select and GO panel. For correct ISO centering. Finally, position the table into the Borat isocenter using the isocenter button and the jog wheel.

SIEMENS Scheduler Pるコ 工物0物 Doe, Jane Patients Doe. Jane All Programs Examination Information 988 mm 865 mm Home Spine Coil Contour S Coil S Coil Hand / Wrist Exam SIEMENS @ Siemens Healthcare GmbH, 2021 Medical Information Position Patient Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not Please note that the learning material is for training purposes only. Healthineers (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers For the proper use of the software or hardware, please always use the Operator Manual or Instructions for く& iCa -一2ョ0コ D03 Program Selection ・0 :マニ、一 Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used sales representative for the most current information. as training material only and shall by no means substitute the Operator Manual. Any material used in this ・をス0 The reproduction, transmission or distribution of this training or its contents is not permitted without training will not be updated on a regular basis and does not necessarily reflect the latest version of the RF Transmit Mode software and hardware available at the time of the training. express written authority. Offenders will be liable for damages. Body part and Laterality The Operator Manual shall be used as your main reference, in particular for relevant safety information like All names and data of patients, parameters and configuration dependent designations are fictional and warnings and cautions. examples only. Patient Orientation Please note: Some functions in this material are optional and might not be part of your system. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. と一P「ョ5 BO Part and「& = RF T &ョョく0d2 P「ョ一0コ Paョ一0ョコ E m一をコ一nョコ