GSP Toolbar | Pinning

The toolbar of the G is hidden by default. If needed, you can pin the flyout toolbar so it is always visible. If you want to pin the flyout toolbar, perform the following steps. First. Click on the white down arrow to open the tools menu located above the three image segments. Second, click on the small pin next to the settings wheel on the right side of the menu. The background of the pin turns to a light Gray and the orientation of the pin changes from horizontal to vertical. The toolbar is now pinned and the tools in the flyout toolbar are now always visible in the user interface. To unpin the flyout toolbar, you can click again on the small pin icon. The light Gray background of the icon fades away, and the pin orientation changes back to horizontal. The tools in the flyout toolbar menu will be hidden again. Please note the flyout toolbar pin preference is not saved after a system restart. The flyout toolbar default is set to unpinned. If preferred. You will need to perform the steps again to manually pin the flyout toolbar.

04:42 02:34 03:01 03:44 04:4 03:0 5/28/2021 1061 502 1154 789201 02:3 03:4 568 89201 78920 GSP Toolbar - Pinning SIEMENS Doe, James Healthineers * 11/30/1996 M 789201 MR View&GO Brain Assist AAHead_Scout ep2d_diff_4scan_trace_p2 t2_tse_tra t2_ep_tra_hemo Stop Continue Guidance Parameters Slices are aligned by AutoAlign. Note that If you change slice positions manually, it might be impossible to reproduce these exact slice positions for SAR Stim subsequent protocols and follow-up examinations. Mode Calculation of AutoAlign result is ongoing ... Please wait. Waiting for slice positioning. 9:50:47 AM Cancel Auto Coverage is running ... HAR 12 IMA 1 FRM 3/5 RFA AAHead_Scout_MPR_sag Go Delete AFL 14 IMA 1 FRM 2/3 AF TP 0 SP A51.1 SP F10.0 Line Mode 5cm Normal Display Shce Groups in Package AH 3 2:58 min Auto Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthcare GmbH 2022