Foot/Ankle Exam | Position Patient - 16 Coil

Slide the foot/ankle coil into the lateral If necessary, tilt the coil slightly in the By sliding the base plate, you can move recesses at the head end of the patient table direction of the magnet to position Please note that the learning material is for training purposes only. the actual foot coil into the required SIEMENS NO patient registered so that it locks into the coil sockets. the patient more comfortably. position for easier patient positioning. regarding patient positioning. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. 'ida ida AnkLe/Foot Exam spine 32 The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. SIEMENS . SIEMENS Foot Ankle 16 INFORMATION Please note: Some functions shown in this material are optional and might not be part of your system. Incomplete coil Position Patient Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available COIL PLUGGED in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Healthineers Please contact your local Siemens Healthineers sales representative for the most current information. Foot Ankle 16 The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. The base plate is swivel-mounted. The All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Once the upper part is correctly To examine the foot or ankle of a patient, Once the coil is correctly plugged in, a tilt-locking mechanism enables you to To increase patient comfort and reduce noer the If necessary, use straps to securely Position the upper part of the coil on Use the lever handle at the back of @ Siemens Healthcare GmbH 2021 Bring the patient in a feet-first supine position, positioned, a confirmation message is position the spine coil on the patient table and Position the cushion for head support Also place the gap cushion in the adjust the angle of the foot/ankle 16 coil Place the heel cushion in the lower confirmation message is displayed on the motion artifacts, you can put a knee cushion Place the foot cushion under the other foot. the coil. Use the Select&GO positioning and start the Use the JogWheel to align the laser-light the lower part so that it locks into fasten the foot in the base plate of the coil to remove the upper part with the feet towards the magnet. Place the ce the displayed on the Select&GO display. the table pad at the foot end of the patient at the foot end of the table. lower part of the coil. Select&GO panel. place. part of the coil. to best suit the specific requirements under the patient's knee. localizer with the center marking of the coil. place. measurement. the coil. from the base plate. foot to be examined on the heel cushion. table. regarding patient positioning.