FlexLab™ X Total Lab Automation Monthly Maintenance on the Desealer Module Job Aid

FlexLab TM X Total Lab Automation SIEMENS Healthineers Monthly Maintenance on the Desealer Module Job Aid Clean the Gripper Pads and Drip Tray on the Desealer Module Refer to the FlexLab X Total Lab Automation Operators Manual when performing maintenance procedures. 1. Set the Desealer Module Off-line and Flush Carriers 2. Remove the Desealer Module cover A 3. Manually pull up the Desealer head and rotate it to the deseal position 4. Using a lint-free cloth moistened with 0.1% sodium hypochlorite solution, clean the: B A. Drip Tray B. Gripper Pads 5. Install the Desealer Module cover 6. Set the Desealer Module in On-line status Template Effective Date: 10 Aug 2021 | HILS 2223 1 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024 FlexLab TM X Total Lab Automation SIEMENS Healthineers Monthly Maintenance on the Desealer Module Job Aid Clean the Interchangeable Pipe on the Desealer Module Refer to the FlexLab X Total Lab Automation Operators Manual when performing 4 maintenance procedures. 1. Set the Desealer Module Off-line and Flush Carriers 2. Remove the Desealer Module cover 3. Manually pull up on the Desealer head and rotate it to the deseal position 4. Extrude the interchangeable pipe from the internal chute 5. Carefully clean the interchangeable pipe with a lint-free cloth moistened with 0.1% sodium hypochlorite solution, paying attention not to scratch it 6. Roll the interchangeable pipe again and insert it into the chute. Slide it all along the chute length 7. Manually put the head of the Desealer back in place 5 8. Install the Desealer Module cover 9. Set the Desealer Module in On-line status 2 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024 SIEMENS Healthineers Please note this learning material is for training purposes only. FlexLab TM X Automation is manufactured by Inpeco and distributed by Siemens Healthcare Diagnostics Inc. FlexLab is a trademark of Inpeco SA. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com 3 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024