FlexLab™ X Total Lab Automation Enable and Disable Instruments and Tests Job Aid

FlexLab TM X Total Lab Automation SIEMENS Healthineers Enable and Disable Instruments and Tests Job Aid Enable and Disable Instruments The Enable/Disable Tests and Instruments screen allows Enable/Disable Instrument and Test users to enable/disable tests for the channels Automation, Instrument, and Host. + Automation A B C 1. Select Setup > Enable/Disable Tests and Instruments - Instrument The list of Instruments provides information about the Automation to which each Instrument is connected and the 033_11K FLEXLAB: 033 related Automation node number A. Instrument ID 034_11K FLEXLAB: 034 B. Automation ID and Instrument position on 035_11K FLEXLAB: 035 Automation C. Instrument Status 036_11K FLEXLAB: 036 D 2. Select the button near the name to switch between the two alternative statuses: • PLAY = Enabled • PAUSE = Disabled Template Effective Date: 10 Aug 2021 | HILS 2223 1 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024 FlexLab TM X Total Lab Automation SIEMENS Healthineers Enable and Disable Instruments and Tests Job Aid Enable and Disable Tests When an Instrument is selected from the list, a map of the available tests is displayed. Tests can be viewed by Class or by Instrument. 1. Select Setup > Enable/Disable Tests and Instruments 2. Select an instrument from the list. The By Class tab displays each test of the selected instruments, shows also all the other instruments where the same tests are configured. A. Allows user to check status of up to 30 Analyzers belonging to a specific Instrument class B. Displays Instrument test code and Automation test code Enable/Disable Instrument and Test + Automation BY INSTRUMENT BY CLASS C. Column for each Analyzer with configured test Instrument Test Code Test Send test co ... Receive test ... Automation . 033_11K 034_11K Test quantity 033_J1K FLEXLAB: 033 IK_A0201 11K_AD201 11K_A0201 11K_A0201 11K_A0201 IK A0201C 11K_A0201C M1K_A0201C 11K_A0201C 11K A0201C D. Displays the total inventory associated to the test 034_11K FLEXLAB: 034 MK_A23522 11K_A23522 11K_A23522 11K_A23522 11K_A23522 MK A26181 ITK_A26181 11K_A26181 11K A26181 11K_A26181 035_11K FLEXLAB: 035 IK A3T 11K_A3T M1K_A3T I1K_A3T ITK A3T 3. If the test is checked, the test is enabled. 11K_A3TC 11K_A3TC FLEXLAB: 036 IK_A3TC 11K A3TC 11K_A3TC 036_J1K IK AZT 11K A7T IK_A7T IK AZT 11K AZT 4. To enable or disable a test, select the appropriate checkbox. 5. A red triangle indicates changes have not been saved A B C D 6. Select Save 2 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024 SIEMENS Healthineers Please note this learning material is for training purposes only. FlexLab TM X Automation is manufactured by Inpeco and distributed by Siemens Healthcare Diagnostics Inc. FlexLab is a trademark of Inpeco SA. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com 3 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024