FlexLab™ X Total Lab Automation As Needed Maintenance on the Desealer Module Job Aid

FlexLab TM X Total Lab Automation SIEMENS Healthineers As Needed Maintenance on the Desealer Module Job Aid Empty the Waste Container of the Desealer Module Refer to the FlexLab X Total Lab Automation Operators Manual when performing maintenance procedures. 1. Open the front panel to access the Desealer waste container 2. Slide the waste container all the way forward 3. Remove the biohazard waste bag (if present) and discard the bag with contents according to standard laboratory practice and guidelines 4. At the discretion of the Laboratory, install a new biohazard waste bag in the waste container 5. Ensure the waste container has been out of the system for more than 3 seconds to automatically reset the waste counter 6. Slide the waste container back into the waste area, pushing firmly 1 against the rear wall 7. Close the panel of the Desealer waste container R Template Effective Date: 10 Aug 2021 | HILS 2223 1 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024 SIEMENS Healthineers Please note this learning material is for training purposes only. FlexLab TM X Automation is manufactured by Inpeco and distributed by Siemens Healthcare Diagnostics Inc. FlexLab is a trademark of Inpeco SA. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Siemens Healthineers HQ I Siemens Healthineers AG Siemensstr. 3 91301 Forchheim Germany Phone: +49 9191 18-0 siemens-healthineers.com 2 Effective Date: 28 Mar 2024| QR700003068 Unrestricted I Published by Siemens Healthineers AG | © Siemens Healthineers AG, 2024