epoc® Blood Analysis System with NXS Host Performing a Blood Test Using A Capillary Tube Job Aid

epoc® with NXS Host Blood Analysis System SIEMENS Healthineers Performing a Blood Test Using A Capillary Tube Job Aid Sample Introduction Using A Care-Fill TM Capillary Tube 1. Hold the tube by the blue band, pointing the tip of the capillary tube upwards so that it is vertical 2. Slide the adapter towards the tip of the capillary tube and insert the capillary tube into the adapter 3. Affix the adapter to the capillary tube by gently pushing the 5 capillary tube into the adapter until it is secured in the 4 adapter 4. Hold the capillary tube vertically by the large end of the adapter and insert it into the test card sample port. Rotate the adapter ¼ turn to ensure a good seal 3 5. Maintain hold of the adapter and use the fingers of your other hand to push the plunger down in a single motion 6. Once the reader has beeped, disengage the capillary tube from the card by tilting it as opposed to pulling it straight up in order to prevent a suck-back effect from happening to the sample Template Effective Date: 27 May 2019| HOOD05162003010284 Effective Date: 07-JUN-2021| HOOD05162003194856 1 Unrestricted © Siemens Healthineers, 2021 epoc® with NXS Host Blood Analysis System SIEMENS Healthineers Performing A Blood Test Using A Capillary Tube Job Aid Sample Introduction Using A Care-Fill TM Capillary Tube 25-Jun-25 16:10 100% 25-Jun-25 16:11 100% 5. While the sample is being analyzed, enter the patient ID X Blood Test: Rdr2044 X Patient 12345 into the host. Once the information has been entered into Inject Sample Inject Sample the Host, a checkmark will be visible on the blue circle and 04:17 remaining 03:38 remaining Show me how Show me how the patient id is shown in the action bar. Patient ID can also be viewed in the Edit Test Details section of the software Edit Test Details V Edit Test Details V hide hide 6. Answer Yes or No to the hemodilution question and press Patient ID * Patient ID * confirm to proceed with the blood test Required to view re 12345 Choose select test in the software. Select the test panel 5 7. 12345 Select Hemodilution * 6 No from the list. Select the proper buttons to customize the Patient ID lookup timed out Select Hemodilution Clear test options. Select confirm once all information has been O Yes USE THIS ID TRY AGAIN entered O No Select Hemodilution * 8. Other patient information such as patient age, gender and Required to view results V Required fields completed height can be entered into the edit test details section. If Select Sample Type temperature correction is needed, that information can be Select tests + Select Sample Type entered into this area as well. Once complete, select close All in the software + Select tests 7 Enter patient information Patient temperature, age, gender, height All Template Effective Date: 27 May 2019| HOOD05162003010284 2 Effective Date: 07-JUN-2021| HOOD05162003194856 Unrestricted © Siemens Healthineers, 2021 epoc® with NXS Host Blood Analysis System SIEMENS Healthineers Performing A Blood Test Using A Capillary Tube Job Aid 1 2 Sample Introduction Using A Care-Fill TM Capillary Tube 26-Jun-25 16:00 100% 9. The host will display analyzing sample when the test is in Patient 12345 process 10. When the analysis is complete, the results will display on CLOSE & REPORT REJECT TRANSMIT RESULTS TEST the host screen. If any data is missing, the missing required Gases+ data message will appear on the screen prompting the PH pCO2 po CHCO 3 operator to enter the missing data in order to view the test 7.069 67.2 96.3 19.4 results mmHg mmHg mmol/L 11. Remove the test card once the results are displayed on the BE(ecf) BE(b) CSO2 host screen. Discard according to laboratory protocol -10.8 -7.5 93.2 mmol/L mmol/L % 12. Select the close and transmit button to save the test data Chem+ and close the test window. Select the report results button Na+ K+ Ca++ CI- to document who the test results have been reported to. 114 2.2 1.40 80 Select the reject test button to reject the results mmol/L mmol/L mmol/L mmol/L TCO2 AGap AGapk Hct 20.5 14 17 <10 mmol/L mmol/L mmol/L % Edit Test Details show V Template Effective Date: 27 May 2019| HOOD05162003010284 3 Effective Date: 07-JUN-2021| HOOD05162003194856 Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2021 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Template Effective Date: 27 May 2019| HOOD05162003010284 4 Effective Date: 07-JUN-2021| HOOD05162003194856 Unrestricted © Siemens Healthineers, 2021